Name of Work:REPAIROF HARD STANDING / VEICHLE PARKING AREA OF ASC CENTRE & COLLEGEUNDER GE (CENTRAL) BANGALORE .
Sl. No.
Item Description
1
Demolition ofkerb stone of anydescription & laid in any positionnot otherwise specifically providedabove or below ground level andremoval of entire debris as ordered outside MD land complete all as directed.
2
M&L for precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:6, complete all as specified and as directed.
3
Scarifying or picking graveled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50 mm, n.exc 100 mm deep completeall as specified & directed.
4
Finishing surface of concrete roads, pavements, pavings etc, by belting whilst the concrete is green, all as directed.
5
M&L for cement concrete (Quality Concrete) work in pavement/hard-standing of flexural strength 40 Kg per squareentimeter in field using 400 Kg of cement per cubic metre, thickness of concrete 25 cm or less,including necessary form work for laying in bays between joints & contraction, expansion joints/or between the two contraction joints,complete, all as specified & directed.Notes :-(ii) The construction, dummy (contraction) & expansion joints shall be measured separately under respective items.(ii) Design mix shall be approved by the GE before execution of the work. In case, quantity of cement as per actual design mix works out less than 400 Kg per cum of concrete, then minimum cement as 400 Kg/Cum of concrete shall be used without any extra cost to Govt. In case cement as per actual design mix is more than the 400 Kg/cum of concrete, the actual quantity as per design mix shall be used in the work without any extra cost to Govt.
6
M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘B’all as specified and directed.
7
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ all as specified and directed.
8
M&L for preparation of new /oldconcrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in black & white tint, all as specified & as directed.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
