|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge : All kinds of soil |
| 2 | Providing and laying in position base concrete in 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources., including supply of all material, T&P, curing etc., complete. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand). |
| 6 | Providing and fixing MS grill size 2.20m x 1.20m with 50 x 50 x 5mm size MS angle and16 mm square bar including cutting, hoisting, fixing in position and making bhala at top of each 16mm square bar with supply of all T&P etc required for proper completion of work. |
| 7 | Provision for Fitting and Fixing of stone Benches as per size top platform 1 No X 2.00M X 0.60 M X0.10 M and vertical base 2 no X 0.45 m X 0.15 M x 0.60 M Including finishing and fixing in concrete base with supply of all materials labour T&P etc. Complete |
| 8 | Provision for installation of stainless steel dustbin set fitting and fixing with frame including all material T&P complete. Size 20x 30 |
| 9 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. |
| 10 | Provision for fixing Retro reflecting direction board at monument ( size 1.20 m X 0.90 m ) outer frame 65 mm dia stainless steel pipe grade 304 with and inner frame 40 mm dia S S pipe with blue back ground and text in white colour both side complete with labour and material all . |
| 11 | Providing for pointing on brick work with cement mortar 1:3 (1 cement : 3 fine sand) Flush / Ruled/ Struck or weathered pointing . complete in all respect . |
| 12 | Provision for up gradation of C.N.B in chunar sand stone as per design and drawing size (1. C.N.B board .75m x 1.35m x 0.06m 2. C.N.B bord pillar .21m x .21m x 1.40m ) and text .approved from circle office including engraving the text on stone inking and installation& fixing on ground working site Supply of all labour and materials etc. |
| 13 | Usage/Application Water Cooling Brand Aqua soft Type Cold Cooling Capacity120 LPH Warranty1 Year Body Material Stainless Steel Number Of Taps2 Weight150 kg Dispenser Single Dispenser Total Power1.5 kW Coin Operated Rs. 1,2,5,10 Dispensing300 ml,500 ml,1 ltr,2 ltr,5 ltr to 20 ltr Dimension 6.5 x 3.5 x 3.5 feet |
