Name of Work: Supply of Machinery/Tools for various parks at Pul Pehladpur Ward No. 179 in Central Zone
Sl. No.
Item Description
1
Brush CutterEngine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYENGINE DISPLACEMENT: 40.2CCPower Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPMCARBURETOR: Diaphragm with compensator technology.Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 KgCLUTCH: Centrifugal Type, Clutch Shoe Support base & liningMetal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton
2
Petrol Operated Pole PrunnerEngine : Single Cylinder, 2 Stroke, Air cooled OnlyDisplacement: Should be between 25-30 CC POWER OUTPUT : Should be minimum 1.2 HPWeight (Dry without cutting attachment & fuel ): Should not be more than 7.5 KgFuel tank capacity (ml): Should be minimum 400mlChain oil capcity (ml): Must have minimum 200 ml.Clutch : Clutch shoe linining should be metal only.Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only.Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pitch should be 1/4\" OR 3/8Picco only and drive link thickness must have 1.1 mm or 1,3 mm.Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket.Equipment total Length with guide bar and chain ( cm ) : Should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A)Vibration Measurement m/s2 at control handle - Extended Poistion : Should not be more than 5.5 m/s2Certification :Must have TUV certification with test standard EN ISO 11680.
3
Hedge TrimmerEngine: 2- Stroke - Single Cylinder Air cooled.ENGINE DISPLACEMENT: Should be between 20-25 CCPower Output: Should be minimunm 1 HPFUEL TANK CAPACITY: Minimum 400 mlWEIGHT: Should not be more than 6.0KGCLUTCH: Clutch Linning should be metal only.HANDLE: Must have Rotating multi-function handleANTI VIBRATION SYSTEM: Must have spring loaded technology for Anti Vibration System Design: Should have Double sided blade with tooth spacing minimum 35mm Bar Length: Minimum 600 mmBlade: Should have Chrome Plated -Anti Corrsion. Stroke Rate ( l/min): Minimum 3000 Vibration Level m/s2 at Right Handle: Should not be more than 3.5 m/s2.Sound pressure level (dB..(A)): Should not be more than 95Certification: Should have TUV with EN ISO 10517:2009
4
LopperAnvil Tree Branch Lopper lade Material - High Carbon steel with Hard Surface Treatment, Overall Length - Not less than 914 mm Handle Material - Similar Materil as per requirement, Weight - 1.5 kg., Cutting Dia - Not Less Than 38mm
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
