|
| 1 | Dismantling of existing RCC/ Steel /Wooden posts or struts any section,concrete, brick work ,masonry etc including taking out embedded portion and making good disturbed ground complete allas speciified and directed |
| 2 | Dismantling wrought iron or mild steel work of any description complete allas speciified and directed |
| 3 | Excavation in post holes each not exceeding 0.50cum getting out in Hard/dense soil and returning,filling in layers not exceeding 25cm and making good surfaces complete allas speciified and directed |
| 4 | M & Lfor PCC1 : 3 : 6 type C2 using 40 mm graded stone aggregate as in foundation filling for securing posts complete allas speciified and directed |
| 5 | S & F, angle iron (Fe-290 Gde E-165) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed |
| 6 | Supply only galvanised chain link fencing of any size or type complete allas speciified and directed |
| 7 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire including dismantling existing chain link fencing complete all speciified and directed |
| 8 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long and dia of neck not exceeding 12mm bore complete all speciified and directed |
| 9 | S & F in repair, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed |
| 10 | S & F in repair of concertina coil fencing with punched tape coil 600 mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shaped barbs with 18 SWG sheet, spring core 2.5mm thick wire with tape 0.52mm thick and weight of each coil should not be less than 6.50Kg, each coil should have 50 rounds and should cover 6RM length, fixed over and including 6 lines of horizontal RBT (reinforced barbed tape) wire or razor wire at points wherever coil touches the bottom of wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed.NOTE : (i) Hogging shall be fixed at interval of 600mm centre to centre, wherever it touches with the razor wire.(ii) Overlapping of concertina coil and razor wire shall be 300mm.(iii) Y shaped angle iron post shall be measured and paid separately under respective items. |
| 11 | Supply and fixing framed work such as grills, gratings etc for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete including dismantling of old U/S mild steel work of any description all as specified and directed. |
| 12 | M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all asspecified and directed. |
| 14 | M&L for brick work with fly ashbricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 including demolition of old brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed. |
| 15 | M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete allas speciified and directed |
| 16 | M & L for preparation of new plastered surfaces of wall applying two coats of cement base paint complete allas speciified and directed |
| 17 | S & F in repair 2mm thick Fibre glass reinforced translucent plain sheeting with two plain side lap fixed with coach screw and washer in roof, wall etc complete allas speciified and directed |
