|
| 1 | Demolition of un-reinforced cement concrete from roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work of any description including removal of rubbish from the site complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete from roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work of any description including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all directed. |
| 3 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviciable material from site complete all as specified and directed. |
| 4 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. |
| 5 | Dismantling of 100/75mm dia PVC pipe and its fittings and taking out of trenches, if required or from wall complete all as specified and directed. |
| 6 | Cleaning and removing existing PVC water tank of 500 litre capacity for all scale and dirt, etc, and from mouths of circulating pipes including disconnecting, setting aside (or lowering if required) for repairs including tank nipple/ cover/ ball cock cleaning etc. and hoisting if required reconnecting and re-fixing in position, spraying of anti bacterial (hydrogen peroxide) and writting date of cleaning complete all as specified and directed.Note: (i) The Quoted rate shall be included for writting date of cleaning with white/black paint on water tank in stencile and spraying of anti bacterial (hydrogen peroxide).(ii) Any damage occurred to the tank during the process of cleaning the tank shall be replaced with new tank by contractor without any extra cost.(iii) The quoted rate shall include for gurantee of a period of six month from the certified date of cleaning.(iv) All debris and waste material obtained during cleaning of tank shall be disposed at a location decided by Engr-in-Charge at distance n exc 50 meter without any extra cost.(v) The quoted rate shall be also included obtaining signature of user in register duly authenticated by Engr-in-Charge. |
| 7 | All as item No 6.00 above but 1000 litre capacity and ditto- |
| 8 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 9 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 10 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed. |
| 11 | Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | All as per item No 11.00 above but 6 to 8mm dia for stirrups, spacer, binders and -ditto-. |
| 13 | Material and labour for RCC (1:2:4) (nominal mix) type B1(using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 14 | Material and labour for 100mm thick PCC (1:2:4) type B2(using 40mm graded stone aggregate) as in base for water tanks on roof surface and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | Supply and fix in repair 20mm bore PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed (minimum weight- 210 gms) complete all as specified and directed. |
| 16 | Supply and fix in repair tank cover made of 1mm thick steel sheet with zinc coating, 600mm dia and 150mm height of spherical shape and gas welded spikes of 2mm dia and 75mm long at 50mm centre to centre of all surface in zig zag pattern and fixed with 50mm long medium weight MS butt hinge locked to 100mm long hasp and staple on existing PVC water tank of 500 to 1000 litre capacity complete all as specified and directed. |
| 17 | Material and labour for brick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and as directed. |
| 18 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified anddirected. |
| 19 | Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) andfinished the surfaceseven and smooth without using extra cementcomplete all as specified anddirected. |
| 20 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 21 | Material and labour for PCC (1:2:4) type B-1 (20mm graded aggregate)as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessaryformwork complete all as specified and directed. |
| 22 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required superfacial area not exc 150 sqcm complete all as specified and directed. |
| 23 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed . |
| 24 | Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed . |
| 25 | Supply and fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 26 | Supply and fix 110mm bore PVC (SWR) bends of any radius and provided with access door complete all as specified and directed . |
| 27 | Supply and fix 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 28 | Supply and fix 110mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 29 | Supply and fix 75 mm bore PVC (SWR) plain bend any radius complete all as specified and directed. |
| 30 | Supply and fix 75 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed. |
| 31 | Supply and fix 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 32 | Supply and fix 75mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 33 | Supply and fix in repair 40mm dia PVC (HDPE) pipe including all fittings of pressure rating 6 Kg/Sqcm fixed complete to walls, ceilings or in floorscomplete all as specified and directed. |
| 34 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 35 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 36 | Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixedto walls, ceilings, roofs or laid in floors complete all as specified and directed. |
| 37 | Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixedto walls, ceilings, roofs or laid in floors complete all as specified and directed. |
| 38 | Laying / fixing only 15 mm bore steel water tubing with and including all fittings and fixed to walls and ceilings or laid under floorscomplete all as specified and directed.Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 34.00 after taking up/ down. |
| 39 | Laying / fixing only 20 mm bore steel water tubing with and including all fittings and fixed to walls and ceilings or laid under floorscomplete all as specified and directed.Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 35.00 after taking up/ down. |
| 40 | Supply and fix in repair 20mm dia PTMT nipple suitable for HDPE water tank (minimum weight 45gms) complete all as specified and directed. |
| 41 | Supply and fix in repair 25mm dia PTMT nipple suitable for HDPE water tank (minimum weight 65gms) complete all as specified and directed. |
| 42 | Supply and fix in repair PVC tank cover (ISI marked) for PVC water storage tanks of exc. 500ltr and n.exc. 1000ltr capacity and locked with nasessary arrengments and 2mm dia GI wire complete all as specified and directed. |
| 43 | Supply and fix in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | Supply and fix in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | Cutting down vegetation growths like plants/ trees of girth n. exc 15cm from roof tops/ sides, external walls of bldgs, chajjas, wall juctions at junction of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls/ slab surfaces making good affected locations and applyingapproved chemical (herbalmedcine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM (1:2)complete all as specified and directed.Note :The unit rate quoted shall be deemed to include the cost of scaffoloding/ staging upto four storey height bldgs. |
| 46 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 47 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | Demolition of cement concrete (un-reinforced) of any description and in any position including removing debris from site of work complete all as specified and directed. |
| 49 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet complete all as specified and directed. |
| 50 | Material and labour for virified ceramic tiles (light shade) (premium quality) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 20mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 51 | All as per item No 50.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-. |
| 52 | Material and labour for ceramic coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 53 | Material and labour for glazed ceramic tiles of size 300x450x7 mm / 300x200x7 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) completeall as specified and directed. |
| 54 | Material and labour forjoint free anti skid outdoor pavement coloured tiles (good grip series) of size 300 x 300 x 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 55 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 56 | Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 57 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessaryformwork complete all as specified and as directed |
| 58 | Material and labour for 100mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor and pavings including finishing theconcrete surface fair and even complete all as specified and directed. |
| 59 | Finishing of concrete surface by brooming whilst the concrete is green complete all as specified and directed. |
| 60 | Materials and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cementcomplete all as specified anddirected. |
| 61 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 62 | Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash completeall as specified and directed. |
| 63 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified anddirected. |
| 64 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 65 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 66 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 67 | Supply and fix in repair 600x450mm bevelled edge mirror of selected quality glass 5 mm thick, mounted on 6 mm thick commercial ply wood, aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 68 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 69 | Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165 quality-A complete all as specified and directed. |
| 70 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 71 | Supply and fix in repair 15mm bore PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed (minimum weight- 142 gms) complete all as specified and directed. |
| 72 | Supply and fix in repair 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 73 | Material and labour for 20mm thick black marble machine cut in skirting/ dado/ floor and jointed with grey cement slurry including cutting and polishing type laid over and including 20mm thick screed bed in CM (1:6) completeall as specified and directed. |
| 74 | Material and labour for machine cut cudappah stone slab 20-25mm thick over 15mm thick cement screed base in CM (1:6) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 75 | Material and labour for 20mm thick (jade black) granite work (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 76 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations completeall as specified and directed. |
| 77 | Supply and fix in repair 15 mm bore bib taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes completeall as specified and directed. |
| 78 | Supply and fix in repair 15mm bore cast copper alloy angle cock fancy type, chromium plated foriron pipe complete all as specified and directed. |
| 79 | Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts at both ends of length 600 mm complete all as specified and directed. |
| 80 | Supply and fix in repair 25 mm dia dropery rod alumnium powder coated decorative, fancy type with bracket complete all as specified and directed |
| 81 | Supply and fix in repair soap dish, brass, chromium plated complete all as specified and directed. |
| 82 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 83 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium/ rubber beads, nails etc in square/ rectangle not exc 0.5 sqm in each pane complete all as specified and directed. |
| 84 | Supply and fix 5.50 mm thick sheet figured glass, pin head type and glazing with oil putty / wooden / aluminium rubber beads, nails etc in square/ rectangle n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 85 | Supply and fix in repair galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 86 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 87 | Supply and fix in repair 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 88 | Supply and fix in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 89 | Supply and fix in repair plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 90 | Supply and fix in repair 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 with all fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 91 | Supply and fix in repair 32mm dia waste coupling, fittings, brass, chromium plated for sinks, basins, urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cementcomplete all as specified and directed. |
| 92 | Supply and fix in repair 40mm dia coupling fittings, brass, chromium plated forsinks, basins, urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead complete all as specified and directed. |
| 93 | Supply and fix in repair PVC waste pipe 32mm bore and 800mm long complete all as specified and directed. |
| 94 | Supply and fix in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring fixed to door complete all as specified and directed. |
| 95 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 96 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwscomplete all as specified and directed. |
| 97 | Supply and fix in repair suspended false ceiling with \"E\" grid suspended ceiling grid system of grid size 600x600mm with GI framed work of main runner 38x24mm sheet thickness 0.4mm, cross tee 28x24mm sheet thickness 0.3mm and wall angle 24x24x0.3mm including 4mm thick non-asbestos fibre cement bldg disigner board confirming to IS-14862 type B cat 3 of oceanic texture and of any colour of size 595x595mm to be placed in the grid suspended by 4mm dia Gl wire at distance n.exc. 1.20m centre to centre with butterfly clips complete all as specified and directed. |
| 98 | Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 99 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 100 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in soft/loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing surplus soil from site complete all as specified and directed. |
| 101 | Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 102 | Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 103 | Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 104 | Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes,without anyattachment conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed. |
| 105 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n. exc 5cm long complete all as specified and directed. |
| 106 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed. |
| 107 | Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade `A\" complete all as specified anddirected. |
