|
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 3 | Demolition of cement concrete (un-reinforced) and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed. |
| 4 | M&L for cement concrete 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for RCC in Design mix M 25 (20mm graded stone aggregates) as in Foundation, including rafts, footing, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L for Formwork to sides of concrete foundations , footing , bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or bottom rough finished surfaces of concrete in flat surface complete all as specified and directed. |
| 7 | M&L for RCC in Design mix M 25 (20mm graded stone aggregates) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 8 | M&L for form work to faces of walls retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter for flat surface and rugh finished surfaces of concrete, complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 10mm dia, and overcut to lengthbent to shaperequired includingcranking, bendingspirally for hopingends forcolumns, hookingends and bindingwith andincludingmild steelwire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fairfinishedwithout using extra cement with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately) |
| 11 | Supply Liquid water proofing compound complete all as specified and directed. |
| 12 | M&L for two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified and directed. |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) in All Kind of soil means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed. |
| 14 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 15 | M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface complete all as specified and directed. |
| 16 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed. |
| 17 | M&L for non woven geo textile including filtering characteristics 120 gsm 2.50 mm thick for to control land slides and soil erosion. The woven open mesh fabrics is made entirely of natural and bio degradable and eco friendly materials complete all as specified and directed. |
| 18 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor as in weep holes complete all as specified and directed. |
| 19 | Forming dovetailed cavities, n exc 10cm x 10cm at top and 20cm x 20cm at bottom in concrete cast-in-situ (plain or reinforced) for holding down bolts, etc. for machinery, stanchions, etc. including temporary forms or moulds and carefully grouting round bolts (after fixing) with cement concrete type Bl, 1:2:4 (20mm graded aggregate) or cement mortar 1:3, complete all as specified and directed. |
| 20 | M&L for Hand packing (any thickness) of Broken stone or boulders at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed. |
| 21 | S&F 0.63 mm thick mild steel, plain, black sheet as in crumple joints in hearths, covering to door chokhats (frames) chullah hoods, water tanks, water througs, ducts, urinal trough and funnels etc. cut to size, edge beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
