|
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 3 | Suspended floors, roofs, landings, balconies and access platform |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 5 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 7 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 8 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 9 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 12 | Old work (one or more coats) |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 14 | Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : |
| 15 | 75 mm diameter pipes . |
| 16 | 100 mm diameter pipes . |
| 17 | 150 mm diameter pipes . |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 19 | One or more coats on old work. |
| 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 21 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 22 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 23 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 24 | Renewal of old putty of glass panes (length) . |
| 25 | Refixing old glass panes with putty and nails . |
| 26 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 27 | 10 litre capacity - White |
| 28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 29 | 32 mm dia |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 31 | 20 mm nominal outer dia. Pipes. |
| 32 | 25 mm nominal outer dia .Pipes. |
| 33 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 34 | 15 mm nominal bore. |
| 35 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 36 | 15 mm nominal bore. |
| 37 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 38 | 15 mm nominal bore |
| 39 | Grading roof for water proofing treatment with |
| 40 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 41 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 42 | Repairs to existing doors/windows/cupboard shutters (steel/wood ) by cutting,weldingetc. wherever required with or without dismantling all complete as per the directions of Engineer-in-Charge.Cost includes the transportation of electric/gas welding plant to site. |
| 43 | Engaging helper for attending day to day maintenance jobs for /carpentry & all other works related to day to day maintenance.( One job will be defined/ consists execution of allitems for the working days as & when required on call basis). Including T&P as required for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of \"supply of material \" of the agreement. |
| 44 | Dismentling and refixing of over head water storage tank after water proofing treatment of roof and making platform for tansi/c necessary fittings i.e. nipples, sockets, Elbows and Unions etc. all complete as per site requirements.(All 3 nos. of over head water storage tank Cap. upto 1000 litre considering one job ) |
| 45 | Cleaning of floor trap/P-trap/gully trap/rain water pipe/water closet/vertical sewage stacks ensuring free flow of sewage and repair of lekage if any all complete as per the directions of Engineer-in-Charge. |