|
| 1 | Scraping old white or colour wash including disposal of refuse materials as directed by Engineer-in-charge with a distance of 60 mts . |
| 2 | Dismantling of existing plaster ….complete item |
| 3 | 12 mm Cement plaster in 1:4 cement sand in ……. Complete item |
| 4 | Providing wall putty on old surface with approved quality material of Berger/ J.K/ Birla or smiliar make 2 coats |
| 5 | Finshing walls with exterior emulsion paint of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 ltr/10sqm including one coat of primer applied @ 0.75ltr/10sqm coat of all material, labour, T&P etc. required for proper completion of work. fror two coat |
| 6 | Providing & Fixing 18mm granite stone……complete item. 8.2.2.2 |
| 7 | Providing and Fixing of Stainless Steel (Grade 304) railling made of hollow tubes,channel,plates including drilling holes,revetting or welding where nessessary and also including supply of steel ….complete item DSR NO.10.28 |
| 8 | Painting or varnishing new work in small areas or new wood work with one coat (upto one sq. mt.) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the DSR NO 13.62.1 |
| 9 | 1:4:8 (1 cement :4 coarse sand : 8 graded brick aggregate 40 mm nominal size.dsr 4.1.8 |
| 10 | kota stone sleb flooring 20mm thick 11.26.1 |
| 11 | Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC 67 2012 retro reflective |sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting, Micro prismatic type IV Retro reflective sheeting |Confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting |shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012 & Proof of the same Report shall be uploaded which quoting |tende:. The rate shall include all materials, labour, T&P, transportation, installatic.. and incidentals all complete as per direction of the Engineer-in - charge MORTH 80 |
| 12 | Supply and fixing of board … complete |
| 13 | Supply and fixing of LED Street light Fitting with mandatorydriver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 30 Watt. to 40 Watt,Confirming to IP 65/66, and IK07 and above protection complete having Company LOGO Engraved complete in all respect including Labour.(UP PWD 2024 Sch No. 23.13) |
| 14 | Supply and wiring of submains with 2 nos. 6 sq mm FRLS PVC insulated copper conductor, Single core cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion (DSR Sch. 2022 No.1.17.20) Please Enable Macros to View BoQ information |
