Tender For Construction Of Artificial (Football) Turf At Thenzawl, Serchhip,Mizoram, Serchhip-Mizoram

TDR : 52994389

Tender Notice
BOQ

27 Days Left

Serchhip , Mizoram

Tender Brief : Tender For Construction Of Artificial (Football) Turf At Thenzawl, Serchhip,Mizoram

Document Fees
₹ 2500 /-

EMD
₹ 2175414.0 /-

Tender Value
₹ 10.87 Crore /-

Submission Date
15-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	A.EARTHWORKS (LEVELLING)
2	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.a)All kinds of soil (excluding ordinary & hard rock)
3	Carriage by Mechanical Transport - for a lead of 5 kmsb) Earth
4	B.INSTALLATION OF TURF
5	Ground Preparation-Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. a) Ordinary soil.
6	Cement Kerbing
7	Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.a) Ordinary soil.
8	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement complete. a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20mm nominal size)
9	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.b) Thermo-Mechanically Treated bars of grade Fe-500 or more.
10	Centering and shuttering including strutting, propping etc. and removal of form for all heights :a) Foundations, footings, bases of columns etc. for mass concrete.
11	Carriage by Mechanical Transport - for a lead of 5 kms b) Earth
12	Laying of Turf with subbase works complete :
13	Water Bound MacadamSub-base/base(3)WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, handpicking ,rolling with three wheel 80-100 kn static roller in stages to proper grade and camber applying and brooming, crushable screening to fill up the interstices of coarse aggregates, watering and compacting to the required density grading 3 as per technical specification clause 405.(A) By Mechanicalmeans
14	Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11
15	Laying of perforated PVC drain pipes Heavy Duty of 90mm Outer Dia with staggered perforations.Pipe would be placed diagonally in width after every 5 meter to cover-up desired Length (As shown in Drawing). Supply and Placing of 200 Microns Geo textile Separation Barrier to cover the entire field including the edges. Providing and laying of perforated PVC drain pipes Heavy Duty of 200mm dia with staggered perforations. Pipe would be placed on both side of Lengths (As shown in Drawing).
16	Supply & Installation of FIFA Quality & Quality Pro certified Sports Artificial Turf from FIFA Preferred Manufacturer having Pile Height of 60 MM with permanent Line Marking with following specification: Composition PE, Structure Monofilament, V Shape & Fibrillated Yarn, Emerald & Lime colour, Dtex 17500, Tape thickness 260µm & 85µm. Tape width 1.10mm & 6.0mm, Pile height 60mm±1mm, Gauge 3/4 inch, Stitches per 10cm 13±1, Stitches per m2 6825±100 according to ISO 1773, Total yarn weight 1620 Gms/Sqm ±10%, Double layer PU Backing, Weight 250 Gms/Sqm, Secondary backing Weight 1150Gms/Sqm ±10%, Total Carpet weight 3020 Gms/Sqm ±10%, Water Permeability of Turf carpet:> 2000 mm/hr, Infilling of Silica sand at the ratio of 15 kg/m2 & SBR Granules at the ratio of 17 kg/m2 Infill as FIFA standard & Test report. Installation of Turf should be done using a seam tape & suitable PU adhesive. Adhesive TDS should match the following basic properties: Colour & Form: Grass- green paste, Characteristics: 2 component, polyurethane reaction adhesive for outdoor use.Specific Gravity: 1480 g/litre, Viscosity:
17	Supplying and installation of FIFA standard goal posts with football nets (2nos) and comer flags (4nos) complete
18	Supplying and installation of FIFA standardSubstitute Benches with cover.
19	CONSTRUCTION OF PAVILION
20	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.a) Ordinaryand Hard Soil
21	Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. a) Ordinary Soil
22	Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering -All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)
23	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All work upto plinth level.
24	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
25	Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls,struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete. a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
26	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a)All work upto plinth level.- Ground Floor Beam
27	Slabs
28	b) All work above plinth level upto floor V level.-First Floor Beam
29	First Floor Slab
30	Staircase
31	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
32	Centering and shuttering including strutting, propping etc. and removal of form for all heights :-a) Foundations, footings, bases of columns etc. for mass concrete.
33	(c) Columns, pillars, piers, abutments, posts and struts.
34	d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.
35	e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
36	f) Staircases (except spiral staircase) excluding landings.
37	Half brick masonry with first class brickin foundationand plinth in: a) in cement mortar 1:3 ( 1cement :3 fine sand)
38	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285fixingwith dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. a) Natural colouri) 2 - track sliding windows/ventilators.
39	Supplying of glass panes at site. c) 4mm thick plate sheet glass.
40	Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.
41	Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete.(a) 35mm Readymade White primer Door
42	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a)Fixed to steel windows by welding
43	20mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
44	15mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
45	6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand)
46	Supplying and fixing M.S. decorative railing consisting of top and bottom rails of 40mmx40mm square or circular section at distance of 788mm apart, 30mmx30mm square or circular section decorative intermediate balusters welded to top and bottom rails at 280mm apart. The base of balusters at 560mm apart welded with base plate of 60mmx3mm thick and fixed with cement grouting firmly to concrete section including steel priming ans steel painting complete etc.
47	Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipes but without the cost for base support. a) Sintex or quivalent
48	Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand), including the joints withwhite cement and matching pigments etc.complete.as per design collours.a)Full body polish vitrified (General)
49	Providing andceramic glazedfloor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand )including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (B) Matt/Antiscratch
50	Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
51	Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colourof 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses.ii) For0.50mm thick :
52	Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colourridges, gutters or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base frame.ii) For0.50mm thick :
53	PAINTING- Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats.
54	Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.a)Regular interior emulsion like Rangoli deluxeemulsion etc.
55	Finishing wall with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade.a) Regular exterior emulsion like supercote, walmasta etc.
56	Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.
57	Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats).(a) General quality
58	SEPTIC TANK & SOAK PIT -Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres.b) Hard soil ( pick work ).
59	Providing and laying inposition cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level:b) 1 : 2 : 4 (1 cement : 2 course sand : 4 stone aggregate 40mm nominal size)
60	Half brick masonry with first class brickin foundationand plinth in: a) in cement mortar 1:3 ( 1cement :3 fine sand)
61	12mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
62	Centering and shuttering including strutting, propping, etc., and removal of form works in - e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
63	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a)All work upto plinth level.
64	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
65	Providing and filling stone aggregates of size below 90mm in plinth, etc. in layers notexceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing complete .
66	Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction). a) 110x110x110mm.
67	SANITARY INSTALLATION-Providing and fixing vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (i) White
68	Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge. .(i) White
69	Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.(a) White Vitreous China Wash basin size 630x450mm with a single 15mm C.P. brass
70	Providing and fixing vitreous china tall pedestal of Parryware/Hindware/Ceraandequivalentmakeforwash basincompletelyrecessedatthebackforthereceptionof pipes and fittings.i) White
71	Providing and fixing on wall face SWRPVC soil,waste and vent pipe including jointing with rubber lubricant/ cement solvent complete.-a)110mm
72	b)75mm
73	Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete.-a) 110mm dia.
74	b) 75mm dia.
75	Providingand fixing SWRPVC plain bend of required degree (45°) including jointing with rubber lubricant/cement solvent complete.a) 110mm dia.
76	ProvidingandfixingsingleequalSWRPVCplainjunction of required degree ( T-junction ) .- a)110x110x110mm.
77	b)75 x 75 x 75 mm.
78	ProvidingandfixingSWRPVCsocketincludingjointing with rubber lubricant/cement solvent.- a)110mm dia socket.
79	b)75 mm dia socket.
80	Providing and fixing ventilation cowl including jointing with rubber lubricant/cement solvent complete.- a)110mm SWRPVC vent cowl
81	b)75mm SWRPVC vent cowl
82	Providing and fixing W.C. connection bend type (siphon) (SWRPVC) including jointing with rubber lubricant/ solvent cement.
83	Providing and fixing 125/110S-trap SWRPVC including joining with rubber lubricant/ solvent cement.
84	Providing and fixing uPVC multi floor trap with floor trap grating including jointing with rubber lubricant/ solvent cement complete.
85	WATER SUPPLY-Providing and fixing brass bib cock of approved quality.
86	Providing and fixing brass stop cock of approved quality.(a) 15 mm nominal bore
87	ProvidingandfixingChlorinatedPolyvinylChloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, includingfixingthepipewithclampsat1.00mspacing. Thisincludesjointingofpipes&fittingswithonestep CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall b) 20mm dia nominal bore
88	ExtraforconcealedinbrickandRCCworksbymaking chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc.
89	Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass FPT Tee with jointing, testing complete including cutting and making good etc.b) 20x20x15mm
90	Making connection of Astral CPVC pipes distribution branchbyprovidingandfixingElbow90owithjointing, testing complete including cutting and making good etc.b) 20mm dia.
91	Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc. b) 20mm dia.
92	Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete.b)20mm nominal bore
93	INTERNAL ELECTRIFICATION-LIGHT POINT,CEILING FAN POINT,EXHAUST FAN POINT ETC(MODULAR TYPE)Wiring in looping system with PVC wire sheathedstandard copper conductor/wires as per IS:694(1990) and Flame retardantlowsmoke&Halogen(FR-LSH))1100voltage graded copperflexible wire stranded copper running inside PVC casing & capping (Gr-II)20mm dia fixed,surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required : Light Point:C:02:01(C) Medium point (Modular)
94	LIGHTPLUG/SOCKETPOINT5/6AMPERES (MODULAR TYPE)Wiring in looping system with PVC wire sheathedstandard copperconductor/wiresasperIS:694(1990) and Flame retardantlowsmoke&Halogen(FR-LSH)1100voltage graded copper flexible wire strandedcopper running inside PVCcasing&capping(Gr-II)20x12mmfixed,surfaceon thewall/ceiling/floor asper convinienceincluding junction box having required numbers of ways from DB to the power plug/socket 5/6A point etc. as required :-C:02:02(E)Lightplug point Very Long point(modular)
95	MAIN TO SUB-MAIN IN COPPER WIRE GRADE-II SURFACE(SINGLE PHASE TWO WIRES)Wiring in looping system with PVC wire sheathedstandard copper conductor/wires as per IS:694(1990) and Flame retardant (FR-LSH)1100 voltage graded copper flexible wire strandedcopper running inside PVC casing & capping (Gr- II)ofallavailablesizesdiameterfixed,surfaceonthe wall/ceiling/floor as per convinience including junction box having required numbers of ways from Main to Sub- main/DB/Sub-Main/DB to SDB/SDB/Switch boards/SDB to switch boardas required :- C:02:06(A)2x2.5Sqmmcopperconductor/cable+1x2.5 Sqmm earth wire
96	SUPPLYINGANDFIXINGOFSWITCH BOARDS (MODULAR TYPE)grade-IISupplyingand fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes, modular plate and necessary switches, plug/socket, and fan regulators etc. with necessary painting if necessary Two modules Switch Board (Modular) I:02:57 2S with indicator + 1Soc
97	Four modules Switch Board (Modular) I:02:57 2S with indicator + 1Soc
98	MCBs/RCCBs/ELCBs/MCCBs/EARTH FAULT RELAYSP/SPN/DP/DP&N/TP/TP&N/FPMCBs SP/SP&N/DP/TP/TP&N/FPSupplying and fixing of all types and rating MCBs, RCCBs, ELCBs etc, 240/415 volts 50 Hz AC supply in the existing MCB DB complete with connections, testing & commissioning etc inN:01:26 40 Amps, DP, MCB Isolator
99	DISTRIBUTION BOARDS MCB DISTRIBUTION BOARDSupplying,fitting and fixing of different rating and numbers of ways Distribution Board with bakelite. Fused fitting (TP&N) with fused links,415 Volts,50Hz AC on surface/recess completed with inter-connection,painting etc, as required.O:03:75 6-ways MCB DB SP & N DD metallic Door
100	LIGHTING FIXTURES(SURFACES/RECESS)LIGHTING FIXTURES CEILING / WALL MOUNTED :-Installation, testing & commissioning of pre-wired flourescent Light fittings of all types, with all accessories and tubes etc, directly on ceiling/wall, including connection with 1.5 Sqmm copperconductor single core cable etc as required.
101	J:02:00 Installation of all kind of Electrical appliancesEARTHING AND LOOPING EARTHINGEarthing with Copper Earth plate 600mmx600mmx6mm thick including accessories and providing masonery enclosure with cover plate having locking arrangment and water pipe, etc. (but without charcoal or coke and salt ) complete as required.
102	Extra for using saltand coke for G.I or copperplateearth electrode as required.
103	LIGHTNING CONDUCTORR:01:67Providingandlayingofcoppertape32mmx6mm thick from earth electrode directly in ground as required.
104	Single phase service connection 25 sqmm twin core aluminium cable Lump sum
105	Fencing
106	Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. a) Ordinary Soil
107	Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering All work upto plinth level:a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)
108	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All work upto plinth level.
109	Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls,struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete.a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20mm nominal size)
110	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)- a)All work upto plinth level.Beam
111	b)All work above plinth level upto floor V level.Beam
112	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
113	Centering and shuttering including strutting, propping etc. and removal of form for all heights :-(c) Columns, pillars, piers, abutments, posts and struts.
114	d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.
115	Half brick masonry with first class brickin foundation and plinth in: a) in cement mortar 1:3 ( 1cement :3 fine sand)
116	20mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
117	1.8m high polysteel goat proof fencing with 2.4m angle iron posts 50 x 50 x 6mm size placed 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm fixing with nails and wire etc. including earthwork complete.
118	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer a) Using M.S angles (40x40x6)mm for diagonal braces
119	Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats.
120	Finishing wall with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade.a) Regular exterior emulsion like supercote, walmasta etc.
121	CONSTRUCTION OF GALLERY
122	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. a) Ordinary and Hard Soil
123	Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres.a) Ordinary Soil
124	Providing and laying in position cement concrete of specified gradeexcludingcost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)
125	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a) All work upto plinth level.
126	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
127	Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls,struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete. a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
128	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)- a)All work upto plinth level.-Ground Floor Beam
129	Slabs
130	b)All work above plinth level upto floor V level.- First&Roof Floor Beam
131	First&Roof Floor Slab
132	Staircase
133	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
134	Centering and shuttering including strutting, propping etc. and removal of form for all heights :-a) Foundations, footings, bases of columns etc. for mass concrete.
135	(c) Columns, pillars, piers, abutments, posts and struts.
136	d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.
137	e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
138	f) Staircases (except spiral staircase) excluding landings.
139	Half brick masonry with first class brickin foundationand plinth in: a) in cement mortar 1:3 ( 1cement :3 fine sand)
140	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285fixingwith dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses.a) Natural colouri)2 - track sliding windows/ventilators.
141	Supplying of glass panes at site.c) 4mm thick plate sheet glass.
142	15mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
143	6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand) Ceiling
144	Supplying and fixing M.S. decorative railing consisting of top and bottom rails of 40mmx40mm square or circular section at distance of 788mm apart, 30mmx30mm square or circular section decorative intermediate balusters welded to top and bottom rails at 280mm apart. The base of balusters at 560mm apart welded with base plate of 60mmx3mm thick and fixed with cement grouting firmly to concrete section including steel priming ans steel painting complete etc.
145	Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
146	Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colourof 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses. ii) For0.50mm thick :
147	Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colourridges, gutters or valleys 50cm overallwidth 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base frame. ii) For0.50mm thick :
148	Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats.
149	Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.a)Regular interior emulsion like Rangoli deluxeemulsion etc.
150	Finishing wall with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade. a) Regular exterior emulsion like supercote, walmasta etc.
151	Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats). (a) General quality
152	CONSTRUCTION OF INTERNAL ROAD
153	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.a) Ordinary and Hard Soil
154	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All work upto plinth level.
155	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
156	Centering and shuttering including strutting, propping etc. and removal of form for all heights : a) Foundations, footings, bases of columns etc. for mass concrete.
157	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. a) Ordinary and hard soil.
158	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a) All work upto foundation & plinth level.
159	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. f) Thermo-Mechanically Treated bars.
160	Centering and shuttering including strutting,propping etd. And removal of form for a) Foundations, footings, bases of columns etc. for mass concrete.:
161	CONSTRUCTION OF APPROACH ROAD
162	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.a) Ordinary and Hard Soil
163	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All work upto plinth level.
164	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
165	Centering and shuttering including strutting, propping etc. and removal of form for all heights : a) Foundations, footings, bases of columns etc. for mass concrete.
166	CONSTRUCTION OF TOILET
167	Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. a) Ordinary and Hard Soil
168	Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. a) Ordinary Soil
169	Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm
170	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All work upto plinth level.
171	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
172	Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls,struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete.a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
173	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) b)All work above plinth level upto floor V level.-Beam
174	Slab
175	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
176	Centering and shuttering including strutting, propping etc. and removal of form for all heights :- a) Foundations, footings, bases of columns etc. for mass concrete.
177	(c) Columns, pillars, piers, abutments, posts and struts.
178	d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.
179	e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
180	Half brick masonry with first class brickin foundationand plinth in: a) in cement mortar 1:3 ( 1cement :3 fine sand)
181	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285fixingwith dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. a) Natural colour i) 2 - track sliding windows/ventilators.
182	Supplying of glass panes at site.c) 4mm thick plate sheet glass.
183	Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.
184	Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete.(a) 35mm Readymade White primer Door
185	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.a)Fixed to steel windows by welding
186	20mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
187	15mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
188	6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand)
189	Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipes but without the cost for base support.a) Sintex or quivalent
190	Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand),including the joints withwhite cement and matching pigments etc.complete.as per design collours.a)Full body polish vitrified (General)
191	Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
192	Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colourof 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses. ii) For0.50mm thick :
193	Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colourridges, gutters or valleys 50cm overallwidth 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base frame. ii) For0.50mm thick :
194	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
195	Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shadea).Regular interior emulsion like Rangoli deluxeemulsion etc.
196	Finishing wall with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade.a) Regular exterior emulsion like supercote, walmasta etc.
197	Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.
198	Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats) .(a) General quality
199	SEPTIC TANK & SOAK PIT -Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres .b) Hard soil ( pick work ).
200	Providing and laying inposition cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level:b) 1 : 2 : 4 (1 cement : 2 course sand : 4 stone aggregate 40mm nominal size)
201	Half brick masonry with first class brickin superstructure above plinth level upto floor V level. a) in cement mortar 1:3 ( 1cement :3 fine sand)
202	12mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement.
203	Centering and shuttering including strutting, propping, etc., and removal of form works in -e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
204	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a)All work upto plinth level.
205	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. b)Thermo-Mechanically Treated bars of grade Fe-500 or more.
206	Providing and filling stone aggregates of size below 90mm in plinth, etc. in layers notexceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing
207	Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction). a) 110x110x110mm.
208	SANITARY INSTALLATION-Providing and fixing vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : i) White
209	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm uPVC P or S trap, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required: (Without Cistern) (a) Orissa pattern pan with integral type foot rests (i) White
210	Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge..(i) White
211	Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.(a)WhiteVitreousChinaWashbasinsize630x450mmwitha single 15mm C.P. brass
212	ProvidingandfixingvitreouschinatallpedestalofParryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings.i) White
213	Providing and fixing vitreous china Urinal Flat Back Small 44 x26.5 x 31.5cm size of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White
214	Providing and fixing vitreous Division Plate 69 x 30 cm size for Urinals. (i) White
215	Providing and fixing on wall face SWRPVC soil,waste and vent pipe including jointing with rubber lubricant/ cement solvennt complete.-a)110mm
216	b)75mm
217	Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solventcomplete.a) 110mm dia.
218	b) 75mm dia.
219	ProvidingandfixingSWRPVCplainbendofrequireddegree (45°)includingjointingwithrubberlubricant/cementsolvent complete. a) 110mm dia.
220	ProvidingandfixingsingleequalSWRPVCplainjunctionofrequired degree ( T-junction ) .- a)110x110x110mm.
221	b)75 x 75 x 75 mm.
222	ProvidingandfixingSWRPVCsocketincludingjointingwithrubber lubricant/cement solvent.-a)110mm dia socket.
223	b)75 mm dia socket.
224	Providing and fixing ventilation cowl including jointing with rubber lubricant/cement solvent complete.-a)110mm SWRPVC vent cowl
225	b)75mm SWRPVC vent cowl
226	Providing and fixing W.C. connection bend type (siphon) (SWRPVC) including jointing with rubber lubricant/ solvent cement.
227	Providing and fixing 125/110S-trap SWRPVC including joining with rubber lubricant/ solvent cement.
228	Providing and fixing uPVC multi floor trap with floor trap grating including jointing with rubber lubricant/ solvent cement complete.
229	WATER SUPPLY-Providing and fixing brass bib cock of approved quality.(a) 15 mm nominal bore
230	Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore
231	ProvidingandfixingChlorinatedPolyvinylChloride(CPVC) pipes,havingthermalstabilityforhot&coldwatersupply, includingallCPVCplain&brassthreadedfittings,including fixingthepipewithclampsat1.00mspacing.Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtestingofjointscompleteasperdirectionofEngineerin Charge. Internal work - Exposed on wallb) 20mm dia nominal bore
232	Extraforconcealed inbrick andRCCworks by making chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc.
233	Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass FPT Tee with jointing, testing complete including cutting and making good etc.b) 20x20x15mm
234	Making connection of Astral CPVC pipes distribution branch by providingandfixingElbow 90owithjointing,testing complete including cutting and making good etc. b) 20mm dia.
235	Making connection of Astral CPVC pipes distribution branch by providingand fixingFemale Adaptor (Brass) with jointing, testing complete including cutting and making good etc.b) 20mm dia.
236	Providing and fixing CPVC Ball valve/ Globe/Stop & Wastevalve/ Boiler drain etc. Complete.b)20mm nominal bore
237	INTERNAL ELECTRIFICATION- SURFACE PVC CASING & CAPPING COPPER WIRING (GRADE-II) LIGHT POINT,CEILING FAN POINT,EXHAUST FAN POINT ETC(MODULAR TYPE)WiringinloopingsystemwithPVCwiresheathed standard copper conductor/wires as per IS:694(1990) and Flame retardant lowsmoke&Halogen(FR-LSH))1100voltagegradedcopper flexiblewirestrandedcopperrunninginsidePVCcasing& capping(Gr-II)20mmdiafixed,surfaceonthewall/ceiling/floor as per convinience including junction box having required numbersofwaysfromcontrolswitchtothelightpointetcas required:Light Point:
238	(B) SHORT POINT (MODULAR)LIGHTPLUG/SOCKETPOINT5/6AMPERES(MODULAR TYPE)WiringinloopingsystemwithPVCwiresheathed standard copper conductor/wires as per IS:694(1990) andFlame retardant lowsmoke&Halogen(FR-LSH)1100voltagegradedcopper flexiblewirestranded copperrunninginsidePVCcasing& capping (Gr-II)20x12mm fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from DB to the power plug/socket 5/6A point etc. as required :-C:02:02(E)Lightplug point Very Long point(modular)
239	SUPPLYING AND FIXING OF SWITCH BOARDS (MODULAR TYPE)grade-IISupplying and fixing ofModularswitch board ofthefollowing sizes/modulesonsurface/recessincludingPVC/Steel boxes, modular plate and necessary switches,plug/socket, and fan regulators etc. with necessary painting if necessary I:02:03 1 S two waysTwo modules Switch Board (Modular)
240	I:02:13 2S
241	I:02:86 2S + 1 R + 1SOC
242	N:01:26 40 Amps,DP,MCB Isolator
243	N:01:27 63 Amps\"DP,MCB Isolator
244	MCB DISTRIBUTION BOARDSupplying,fitting and fixing of different rating and numbers of ways Distribution Board with bakelite. Fused fitting (TP&N) with fused links,415 Volts,50Hz AC on surface/recess completed with inter-connection,painting etc, as required. O:03:75 6-ways MCB DB SP & N DD metallic Door
245	EARTHING AND LOOPING EARTHINGEarthing with Copper Earth plate 600mmx600mmx6mm thick including accessories and providing masonery enclosure with cover plate having locking arrangment and water pipe, etc. (but without charcoal or coke and salt ) complete as required.
246	ExtraforusingsaltandcokeforG.Iorcopperplate earth electrode as required.
247	LIGHTNING CONDUCTOR R:01:67Providing andlaying ofcoppertape32mmx6mm thick from earth electrode directly in ground as required.
248	Singlephaseserviceconnection25sqmmtwincorealuminium cable Lump sum
249	CONSTRUCTION OF SIDE DRAIN
250	Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. a) Ordinary soil.
251	Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)
252	Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excludingcost of centering and shuttering and reinforcement in - a)All work upto plinth level.
253	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.b)Thermo-Mechanically Treated bars.
254	Centering and shuttering including strutting,propping etd. And removal of form for:e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
255	20mm cement plaster 1 : 3(1 cement : 3 fine sand).
256	CONSTRCUTION OF WATER STORAGE TANK
257	Earthwork in excavation over areas (exceeding 30cm in depth, 1.5m width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift 1.5m, disposed earth to be levelled and neatly dressed. a) Ordinary and hard soil.
258	Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level: a) 1:4:8(1 cement :4 course sand :8stone aggregate 20mm nominal size)
259	Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)All work upto plinth level.
260	Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.b)Thermo-Mechanically Treated bars.
261	Centering and shuttering including strutting,propping etc. And removal of form for: e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.
262	20mm cement plaster 1 : 3(1 cement : 3 fine sand).
263	Providing and mixing water proofing chemical (PIDIPROOF LW chemical) in plain and reinforced cement concrete work 1 : 1.5 : 3 , @ 0.4 % by weight of cement.
264	Extra for providing and mixing water proofing chemical (latex or equivalent chemical) @ 2kg per bag of cement in -20mm cement plaster 1:3 (1 cement :3 sand)

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Mizoram Tenders

Construction Tenders

Sports Infrastruture Tenders

Sports Complex Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Artificial (Football) Turf At Thenzawl, Serchhip,Mizoram, Serchhip-Mizoram

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Artificial (Football) Turf At Thenzawl, Serchhip,Mizoram, Serchhip-Mizoram

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us