|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) Kiln seasoned and chemically treated hollock wood (i) 30 mm thick |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 4 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. (a) With second class teak wood beading 62X19 mm |
| 5 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 300x16 mm |
| 6 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete (a) 250x10 mm |
| 7 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete (a) 125 mm |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a) Single rubber stopper |
| 9 | (b) Twin rubber stopper |
| 10 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge (a) Extruded section profile size 42x50 mm |
| 11 | Providing and fixing to existing door frames. (a) 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 12 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 13 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 110 mm diameter |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Single tee with door (i) 110x110x110 mm |
| 16 | (b) Bend 87.5°(i) 110 mm bend |
| 17 | © Shoe (Plain)(i) 110 mm Shoe |
| 18 | 12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 coarse sand) |
| 19 | 15 mm cement plaster on rough side of single or half brick wall of mix : (a) 1:6 (1 cement: 6 coarse sand) |
| 20 | Neat cement punning |
| 21 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : (a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 22 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. (a) Old work (one or more coats) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work. |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : (a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. (a) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 26 | Renewing glass panes and refixing existing wooden fillets: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 27 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (a) Orissa pattern W.C Pan of size 580x440 mm |
| 28 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 29 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a) 10 litre capacity - White |
| 30 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (a) Flat back wash basin of size 550x400 mm. |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Flexible pipe(i) 40 mm dia |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall(a) 20 mm nominal outer dia. Pipes. |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. (a) 25 mm dia. nominal bore |
| 34 | (b) 40 mm dia. nominal bore |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (a) 25 mm nominal bore |
| 36 | (b) 40 mm nominal bore |
| 37 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : (a) 25 mm nominal bore |
| 38 | (b) 40 mm nominal bore. |
| 39 | Providing and fixing PTMT bib cock of approved quality and colour. (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 40 | Providing and fixing PTMT stop cock of approved quality and colour. (a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 41 | Providing and fixing PTMT pillar cock of approved quality and colour . (a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 42 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 43 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. (a) 15 mm nominal bore with 45 cm length. |
| 44 | Cleaning of all manhole / chambers of all sizes in the compound complete including cleaning of adjacent sewer line, removal of earth, silt, slush, brickbats, garbages and other refuses, disposing the same off to dumping site in township complete as per direction of Engineer-in-charge. Cleaning of manholes / chamber shall be done as & when required manually or mechanically. Note :- Rates includes the cost of cleaning of manhole /chamber , de-watering, if required including cleaning of adjacent sewer line , removing of manhole / chamber cover and keeping the same back in position after cleaning etc. complete. Payment will be made for each cleaning. |
| 45 | Providing and fixing steel clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs/PVC gullly, screwed with M.S. screws of required length all complete as per direction & satisfaction of E-I-C. for 110mm dia RWP. |
| 46 | Providing and fixing PVC waater tank cover of approved make having proper locking arrangement over PVC water storage tank of capacity 500 to 1000 ltr. capacity. |
| 47 | Uprooting trees and rank vegetation from wall by dismantling plaster, RCC, brick work etc.and repairing the same with cement conc.1:2:4 and plastering with cement mortar 1:4 (1cement :4 c/sand) after pouring the chemical (Nitric acid ) to stop regrowth of trees including scaffolding (Nothing will be paid extra). All complete as per direction & satisfaction of E-I-C. |
| 48 | Repairs of RCC works up to floor five level (by dropping the structure member if necessary) after removal of loose and friable conc. Exposing rusted reinforcement till sound conc. Is reached and thereafter removal of rust from the steel reinforcement by sand blasting or other mechanical means using wire brush /emery cloth. The clean conc. Surface is to be totally saturated with clean water and apply a bond coat of cement slurry rust proof meterials. Repair the area with cement concrete 1:1.5:3 (1 cement: 1.5 C/sand: 3 Agg. Stone 12.5 mm nominal size ) and finally plastering the surface With 6 to 12mm cement mortar 1:3( 1 cement :3 C/sand). All complete as per direction & satisfaction of E-I-C |
| 49 | Providing and fixing chikenmesh in special repair work ,i/c nail etc. All complete as per direction & satisfaction of E-I-C |
| 50 | Refixing wash basin or Kitchen sink by new G.I pipe or CI bracket and making the walls. All complete as per direction & satisfaction of E-I-C |
| 51 | Cleaning of water tank (RCC or PVC) up to floor five level of capacity 500 to 1000 liter i/c dewatering and removal of all sludge deposits and finally disinfecting with bleaching powder and date of cleaning written in bold letter with synthetic enamel paint. All complete as per direction & satisfaction of E-I-C |
| 52 | Credit value of gate Valve of dia 25 mm to 40 mm |
