|
| 1 | Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 2 | M&L for providing machine cut polished Kota stone slab 18-20mm thick over and including 15mm thick cement screed bed in CM (1:6) and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified |
| 3 | Ditto all as per serial item No. 2.00 described here-in-before but in narrow width of vertical surfaces like riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering/backing coat in cement mortar (1:3). |
| 4 | M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thickrendering/ backing coat in (1:4) including rounding the exposed surfaces of granite complete all as specified and directed. |
| 5 | Ditto all as per serial item No. 4.00 described here-in-before but as in skirting (12 to 15 mm thick) but on 10 mm thick rendering/ backing coat in CM (1:3) complete all as specified and directed. |
| 6 | Providing holes to cooking platform of 25 mm dia size for inserting cooking gas pipe in suitable place complete all as specified and directed. |
| 7 | Demolition of cement concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. |
| 9 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified |
| 10 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide for rough finished surfaces of concrete complete all as specified |
| 11 | M&L for TMT bar 10 mm dia and over cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 12 | Demolition of cement concrete (Unreinforced) Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for Plain Cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone agg)in foundations, filling and mass concrete complete all as specifide as directed. |
| 15 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 16 | M&L for Endura tiles of size 300 x 300 x 10 mmset, jointed and pointed in neat cement slurry over in pavement / footpath / floors complete all as specified and as directed. |
| 17 | M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 18 | M&L for 75mm thick cement concrete (1:3:6) type C2, (using 40 mm graded crushed stone aggregate) as in Plinth protection/ path/Sub base Finished even and fair concrete to be laid in panels area not more than 2 sqm each including necessary joint filling with bitumastic and use and waste of formwork required complete all as directed. |
| 19 | M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes complete all as specified and directed. |
| 20 | M&L for coated pre-polished coloured chequered cement concrete tiles made with grey cement and pig-ments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 21 | M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in coping/ benching for man holes including necessary use and waste of formwork complete all as specified. |
| 22 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 23 | Ditto all as per serial item No. 22.00 described here-in-before but as in skirting fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified and directed. |
| 24 | M&L for joint freenon-skid ceramic tiles any selectedcolour (600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge |
| 25 | Ditto all as per serial item No. 24.00 described here-in-before but on vertical surfaces fixed over and including 10mm thick rendering/ backing coat in CM (1:4) complete.(Size =600x100mm) |
| 26 | M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cementto match with shade of tile in floors laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 27 | M&L for glazed ceramic coloured tiles (450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match with shade of tile fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified and directed. |
| 28 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 29 | S&F aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete all as specified and as directed. |
| 30 | S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified and as dirceted. |
| 31 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site over and including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed |
| 32 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 33 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 34 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks complete all as specified. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc and removal from site. |
| 36 | M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 37 | M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe - 410 (Gde E-250) complete all as specified and directed. |
| 38 | S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm & n exc 10cm long dia of shank 16 to 20 mm |
| 39 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication) |
| 40 | M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 41 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and and directed. |
| 42 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 43 | Demolition of brick work or stone/boulder masonry/ precast concrete block built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 44 | Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 45 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 46 | M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 47 | M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work mixed with water proofing compound @ 200 ml per beg of cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid seperately under relevant item of schedule \"A\". |
| 48 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and directed. |
| 49 | M&L for 15mm thick rendering in cement mortar 1:6 on fair face/other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and directed. |
| 50 | M&L for preparation of newely plastered or unplastered wall surfaces and applying two coats of Exterior acrylic emulsion paint of standard quality and make, over a coat of white primer complete all as specified and directed. |
| 51 | M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified. |
| 52 | M&L for two coats of acrylic distember over a coat of primer on new wall surface including preperation of the surface all as directed and specified. |
| 53 | M&L for precast RCC (1:1.5:3) type A1, nominal mix (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar 1:4 including necessary formwork complete all as specified.Note: Reinforcement shall be measured and paid for separately. |
| 54 | S&F in repairs factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified and as directed. |
| 55 | S&F in repairs factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete with glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified and as directed. |
| 56 | Hacking out of old broken glass any thickness size quality or description from metal (Aluminium/steel) frame including punching or drilling out old glazing pins complete all as specified |
| 57 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin. |
| 58 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane including steel pin. |
| 59 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 60 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples or with wooden beading complete all as specified and as directed. |
| 61 | Taking down chowkats or frames n.exc 1.5 Sqm (without taking off shutter from the frames) and removal from site complete all as specified |
| 62 | Taking down shutters of any description area exc 1 Sqm and n. exc 2 Sqm each and removal from site complete all as specified |
| 63 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. |
| 64 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed complete all as specified and directed. |
| 65 | S&F 75mm size stainless steel butt hinges with mild steel hinge pin complete all specified and directed. |
| 66 | S&F 100 mm size aluminium handles cast type anodised complete all specified and directed. |
| 67 | S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all specified and directed. |
| 68 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 69 | S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 70 | S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified and directed. |
| 71 | S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including PVC seat cover of same make complete all as specified and directed. |
| 72 | S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern \"ORRISA\" pattern size 580 x 440 mm white with integral foot rests (including flush pipe) including PVC \"P\" or \"S\" trap and connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 73 | S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified and directed. |
| 74 | S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed. |
| 75 | S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and dierected. |
| 76 | S&F in repairs Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and CP wall hook including making conncetions and fixed in position complete all as specified and directed. |
| 77 | S&F in repair 15 mm bore fancy type bib taps long body (two in one) brass material, 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- CERA Cat part No. F-1015163 or of Techno commercially equivalent model in other approved make. |
| 78 | S&F in repair brass chromium plated shower rose 125 mm size with shower arm 150 mm long with swivel joints for fixing with 15 mm bore GI pipe complete all as specified and directed |
| 79 | S&F in repair 15 mm bore angle/ stop cock CP brass with flage complete all as specified and directed. |
| 80 | S&F in repairs stop valves fancy type, brass chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified and dierected. |
| 81 | S&F in repairs beveled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 82 | S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CPfor basin etc with long screwed shanks and fly nuts, full threaded flage embedded in white cement incl PVC waste pipe required length complete all as specified |
| 83 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 84 | S&F in repair fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 85 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified |
| 86 | S&F in repair brass chromium plated tubular towel rail, 20mm dia and 0.80mm thick, D type, 60cm long between flanges complete all as specified and directed. |
| 87 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with and including 6mm thick teak wood lipping all around duly painted colour to match with particle board as in cupboards etc including taking down old cupboard shutters etc complete all as specified |
| 88 | S&F 20mm thick second class hard wood clean sawn boarding, plained both sides with and including 6mm thick teak wood lipping on front face, fixed with nails in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including taking down old boardings etc complete all as specified |
| 89 | M&L for second class hard wood in scantling, clean sawn, fixed with nails complete all as specified including dismantling old scantling |
| 90 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified |
| 91 | S&F 100mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified |
| 92 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified |
| 93 | S&F 75mm size extruded brass handles, fabricated type polished complete all as specified |
| 94 | S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified |
| 95 | S&F full frameless cabinet hinges concealed overlay for kitchens, bathrooms, soft close with built-in damper, stainless-steel, metal finish with screws |
| 96 | Supply and fixed in repairs sinks with drainage board made of stainless steel (SS 304 grade) 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 914mm x 460mmx 203mm bowl size 406mm x 354mm x 203mm all complete as specified and as directed. |
| 97 | M&L for complete removal of existing treatment of wall and applying a coat of cement-based wall care putty 1mm thick including preparation of surface to receive finishes (primer, distemper, paint etc.) complete all as specified and as directed by the Eng-in-Charge and as per the manufacturer\"s instructions |
| 98 | M&L for applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour on wall surfaces complete, as per manufacturer\"s specification all as specified and directed. |
| 99 | M&L for applyingtwo coats of white washing including preparation by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on old decorated or undecorated ceiling surfaces all as specified and directed. |
| 100 | M&L for preparation of old decorated or undecorated wall surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying a coat of Acrylic smooth exterior anti-fungal paint of shade as approved by GE complete all as specified and as directed by the Eng-in-Charge and as per the manufacturer\"s instructions |
| 101 | M&L for preparation of old decorated or undecorated wall surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Acrylic smooth exterior anti-fungal paint of shade as approved by GE complete all as specified and as directed by the Eng-in-Charge and as per the manufacturer\"s instructions |
| 102 | M&L for preparation of old decorated or undecorated wall surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying a coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification all as specified and directed. |
| 103 | S&F 15mm bore steel water tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) including taking down old tubes complete all as specified and as directed.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. |
| 104 | S&F 20mm bore steel water tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) including taking down old tubes complete all as specified and as directed.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. |
| 105 | S&F in repairs 75mm bore PVC (SWR) floor/ nahani/ multi floor trap with CP grating any type including jointing with solvent cement complete all as specified. |
| 106 | S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |