|
| 1 | Repairs to potholes any depth, not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | Scarifying or picking gravelled macadem or bituminous macadam surfaces in area not exceeding 400 Sqm and depth not exceeding 50mm deep with and including removing and stacking the excavated material accounted under credit, complete all as specified and directed. |
| 3 | M&Lpreparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanningthe cleaned surface with gunny bags or mechanical air compressor to remove all loose dirt etc, complete all as specified and directed. |
| 4 | M&L applying evenly a priming/ tack coat on prepared WBM with bituminous primer @ 10Kg per 10Sqm of paving bitumen of gradeVG-10 complete all as specified and directed. |
| 5 | M&L Premix bituminous, macadam with paving bitumen binder content of paving bitumen of grade VG-30 not less than 4% by weight of total mix (the exact quantity of binder shall be determined by design mix by Marshal method) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using 10 to 12 Tonne power roller, complete all as specified and directed.Notes :-(a) Premixed Bituminuous Macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(b) The exact bitumen content required shall be determined follwing the Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs. 60.00 Per KG of bitumen. |
| 6 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bag or mechanical air compressor to remove loose dirt etc, complete all as specified and directed. |
| 7 | M&L applying evenly a priming/ tack coat an existing black top surfaces with bituminous primer @05 Kg per 10Sqm of paving bitumen of grade VG-10, complete all as specified and directed. |
| 8 | M&Lbituminous premix asphaltic semi dense concrete (SDAC) 40mm thick (consolidated thickness) with 5.5% binder content of paving bitumen of grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 10 to 12 tonne power roller and laying with mechanical paver, complete all as specified and directed. Notes :- (a) Bituminous premix semi dense asphaltic concrete shall be prepared in central computerised hot mix plant. (b) Design mix shall be got done by the contractor at his own expenses from NABL laboratory as decided by GE. (c) Contractor shall quote his rates by considereing binder contents @ 5.5% of total mix by weight, however in case of any variation in weight of binder contents on lower side as per actual mix design, the same shall be ajusted @ Rs. 60.00 Per Kg of bitumen. |
| 9 | M&L preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer\"s instructions including traffic diversion arrangement complete all as specified and directed. |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector or model No DA 972.0 fixed with and including MS stud of suitable size as per manufacturer\"s instructions complete all as per specified and directed. |
| 11 | S&F in repairs polycabonate convex road safety mirror of size 600mm dia duly plastic framed back covered and provided with holding clamp arrangement having wide field of vision, exterior weather proof, bright reflection, anti glare and easy to maintain suitable for installing on blind curves over the wall or pole etc including round stand post 50mm dia made out of 1.65mm thick steel CRC sheet of total length 2000mm having hold fast at the bottom and top end closed with MSD sheet painted white with synthetic enamel paint over a red oxide metal primer complete all as specified and directed. MAKE: OSCAR SAFETY SOLUTIONS (Cat Part No. OS-789) orequivalent as approved by GE. |
| 12 | Notes :-An amount of Rs. 7070.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
