|
| 1 | BILL NO. 1: ROAD MAINTENANCE |
| 2 | Removal of rank vegetation/weedsandundesirable vegetationfromshoulders, embankmentslopesupto ROW (both sides) complete inallrespectsincluding breakingofclods,rough dressinganddisposal of wastematerialand vegetation at a place outside ROWasperdirectionof Engineer- In-Chargeand as per Maintenance Standards Clause3.3(Frequencywill be once in a quarter). |
| 3 | a)Shouldersincludingside slopesof embankmentupto toe line on both sides of the carriageway.(Frequencyof cleaning will be four times in ayear;howeverlimitedto onlyareaspronetogrowth ofrank/ undesirable vegetation and weeds). |
| 4 | Providingspot reconditioning, reconstruction and regravellingtorepair specific erosion or other damagesforrestoringthe eroded area tooriginally constructed cross section on cutsandfillsslopes/ shouldersconformingto TechnicalSpecifications Clause no. 3002.Fill material should be brought from borrow areas located outside ROW conforming to TechnicalSpecification no. 305.Wateredand well compactedwithplate compactor or power rammer with allleadsand liftsasdirected by the Engineer (Quantity of compacted Fill material to be measuredon cross sectional area basis) |
| 5 | Providingslurrysealfor filling of hair cracks, surface cracksandpreventive/ renewal treatment as per MoRTHSpecification Clause 512. |
| 6 | b) Fillingof Surfacecracks 1-3mmandpreventing/renewal treatment. (Ch 3.100 to 5.100) |
| 7 | Cementpointingofanydesign/repairtoexisting pointing, with cement mortar 1:3 on all types of masonry work in super structure/sub structure as per MoRTH Specifications Clause No. 1000 & 1300. |
| 8 | Cement plaster/ repair to cement plaster in thickness 12-20 mm in cement mortar 1:4 on all types of masonry works in superstructure/substructure at any height as per MoRTH Specifications Clause No. 1000, 1300 and 1400. |
| 9 | Repair to all types of damaged stone/brick masonry work in superstructure and substructure of bridges/CD works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure in cement work complete in all respects including testing etc. as directed by the Engineer conforming to MoRTH Specifications Clause no. 1000, 1300 and 1400. The rate quoted should be after due consideration of the salvage value of the dismantled material. |
| 10 | a) Repair to brick masonry in 1:4 cement sand mortar. |
| 11 | BILL NO. 2: Road Property Maintenance |
| 12 | White wash/cement paint/snowcem in two or more coats to give an even shade and smooth surface for protection of exposedconcrete/masonary portion of Bridges/CD works, kerb and wheel guard including scrapping of damage paint from old surface and repairing of the existing surface wherever necessary complete as directed by the Engineer-in-Charge. |
| 13 | a) White washing two coats on existing surface |
| 14 | b) Colour Washing two coats on existing surface |
| 15 | Painting two coats with first quality enamel paint of approved make and quality to give an even shade including writing, letter and figure etc. complete in all respects as per IRC standard. |
| 16 | a) Printing letters of CD no. |
| 17 | Replacement of stolen/missing retro-reflectorised traffic sign boards by providing and fixing new retroreflectorised cautionary, mandatory and informatory sign as per ASTM D 4956-04 made of High intensity grade Microprismatic sheeting Type-IV, fixed over aluminium sheeting 2.0 mm thick supported on a MS Angle Iron Frame comprising of 40 mm X 40 mm X 4 mm. This frame is further welded to MS Angle 75 mm X 75 mm X 6 mm size, 3.5 meter high vertical post complete as per drawing. This vertical post shall be embeded in M-15 grade cement concrete in a pit of size 450 mm X 450 mm X 600 mm, 600 mm below ground level complete in all respects as per direction of the Engineer. |
| 18 | a) Information Sign |
| 19 | Rectangular 800 x 600 mm |
| 20 | b) Cautionary/Warning sign |
| 21 | Triangular 900 mm side |
| 22 | Providing and marking of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms/sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashes marking at the junctions as per Technical Specifications Clause 803.4 complete in all respect and as per approval of the Engineer-in-Charge.(Zebra Crossing, stop lines etc.) |
| 23 | BILL NO. 3: Pavement Repairs |
| 24 | Providing treatment and repair of pot holes/ruts and anydepth/patchrepairof all types of bitumen pavement completeasper TechnicalSpecification Clause 3004.2 and as per direction of Engineer by usingpavinggrade bitumen/emulsion/cold readymixmaterial. The job includesremoyalof all failed material,trimmingof completed excavation to providingfirmvertical faces,cleaningof surface, painting of tack coat on the sidesandbaseof excavationasperClause no. 503 back filling the patch withbituminous materialas per clause no. 509.Compacting trimming and finishing the surface to forma smoothcontinuous surfaceallasperClause no. 3004.2 of Technical Specification. |
| 25 | Total Length 19.727 km |
