|
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed |
| 2 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 4 | Taking down chowkhat or frames with shutter (withouttaking off shutter from the frame ) area n exc 1.5Sqm each complete with hold fasts etc complete all as specified and directed. |
| 5 | Taking down chowkhat or frames with shutter (withouttaking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 6 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 7 | M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6complete all as specified and directed. |
| 9 | M&L for rendering in cement mortar (1:6), 10mm thick on other than fair faces of brick workmasonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 10 | M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L 15mm thick rendering in cement mortar (1:4) mixed with liquid water proofing compound @ 200 ml per 50 Kg weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid separately as supply only. |
| 12 | M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on brick masonary wall surfaces complete all as specified and directed. |
| 13 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 14 | M&L for vitrified ceramic coloured tiles 8 to 10mm thick area of each tile exceeding 0.42 Sqm but not exc 01 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 15 | All as per item No 14 but on skirtings incl 10 mm thick backing coat in CM (1:4) complete. |
| 16 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 17 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqmset and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 18 | M&L TMT bars of 6 to 8mmdia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed. |
| 19 | M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed. |
| 20 | M&L for18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite includinglaid over 15mm thick screed bed in CM (1:6)complete all as specified and directed. |
| 21 | Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete |
| 22 | S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. complete all as specified. Note: The rates include for one shop coat of priming and filling hollow portion of frame with PCC 1:3:6. |
| 23 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified.Note:The rates include for one shop coat of priming and filling hollow portion of frame with PCC 1:3:6. |
| 24 | S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. |
| 25 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both sideand both facesis covered with approved pattern with Decorative colouredlaminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed. |
| 26 | S&F Iind class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 27 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 28 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161of SSR (Part -II ) 2020 complete all as specified and directed. |
| 29 | S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazedshutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated) fittings such as handle clips (suitable size), locking device, and glazing in panels with 3.5mm thick coloured/tinted glass and gauged with 0.38mm dia, 1.40mm aperture SS wire mesh using Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specifiedwithfixing of iron grill 12mm squarebardirected by Engineer-in-Charge. (In case of non-availability of any particular section, the highersection in terms of Kg/rm shall be provided without any extra cost to govt. |
| 30 | S&F aluminium window and ventilator, shelves shutters, fixed type without sash bar alu section wt 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing anodised alu snap bedding screws etc complete all as specified and directed. |
| 31 | S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete |
| 32 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed. |
| 33 | S&F 3mm thick glass, ordinary quality, 4.8mm thick fixed with oil putty size of glass exc 0.50 sqm in each pane, complete all as specified and directed. |
| 34 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 35 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 36 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 37 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed. |
| 39 | S & F in repairs 100 mm long dual leg door stopper of alumunium alloy body fixing on door, complete all as specified. |
| 40 | S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed. |
| 41 | S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 42 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 43 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 44 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 45 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 46 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 47 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 48 | Dismantling of existing unserviceable RCC/PVC water tankand S&F 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed. |
| 49 | S&F 20mmball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) |
| 50 | S&F in repair tubular towel rail brass chromium plated20mm dia \"D\" type 60cm long between flanges complete all as sped & directed. |
| 51 | S&F in repair looking mirror of selected quality glass of 5mm thick incl fixing brackets, studs, screw complete. |
| 52 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 53 | S&Fin repairs Vitreous china wash basin white flat back size 580x 450mm including ,pedastal typewaste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 54 | S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 55 | S&F in repair, 15mm bore Brass CP mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified. |
| 56 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 57 | S&F in repair fancy typeangle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 58 | Taking down of existing unserviceablewash down water closet with seat cover and S&F Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device,including connection to drain pipe, and to flushing pipe and antisyphonic pipe etc. complete all as specified and directed |
| 59 | Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed. |
| 60 | Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories) |
| 61 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. |
| 62 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. |
| 63 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 64 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 65 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 66 | S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 67 | S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 68 | S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted pleases. |
| 69 | M&L for cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:3 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than or equal to 105 with consumption of 0.61 kg/Sqm (each coat), 2nd coat should be applied once 1st coat becomes dry completelyincluding 10 mm thick cement plaster in cm 1:4 complete all as specified and directed.(Note:-Work shall be done through authorised applicator only)Make : Berger Paints /Thermax/Asian paint |
| 70 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 71 | Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in soft loose soil complete all as specified and directed. |
| 72 | Demolition and bracking up drain pipe SWG line set in CM of description, 100mm dia including side packing / haunching complete all as specified and directed.` |
| 73 | M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed. |
| 74 | M&L for SWG drain pipe grade \"A\" 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed. |
| 75 | Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed. |
| 76 | Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed. |
| 77 | S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed. |
| 78 | M&L for preparation of newsteel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed. |
| 79 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 80 | M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of primer and 1mm thick wall putty, complete all as specified and directed. |
| 81 | M&L for preparation of new plastered surfaces of ceiling and applying three coats ofwhite wash complete all as specified and directed |
| 82 | M&L for applying on newly plastered surfaces two coats ofweather coat damp proof over applying 1 mm thick Wall carewhite ( Putty)over a coat of alkaline resisant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed. |
| 83 | M&L for preparation of old plastered surfaces of ceiling and applying two coats ofwhite wash complete all as specified and directed |
| 84 | M&L for complete removal of existing treatment and preparation to old plastered surface of wall and apply two coats of oil bound distemper over a coat of primer and primer and 1mm thick wall putty, complete all as specified and directed. |
| 85 | S&F Mild Steel work in tubular trusessincl special shape washer etc. confirming to IS 1161-1998 grade St- 240 complete all as specified and directed. |
| 86 | M&L pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength og 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified. |
| 87 | S&f18\"/20\"telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed |
| 88 | S&F 65 mm size brass Cup board lock, 4 lever grade Iof superior qualityall as specified and directed. |
| 89 | S&F Drapery rod 18-20mm dia stainless steel pipe with steel finish 1 mm thick incl steel brackets etc incl connected items for wardrope/CB etc complete all as specified and directed. |
| 90 | Supply and fabrication of kitchen cupboards, shelf, shutter, partition etc made up of 16-18mm HDHMR board (Century/ Action Tesa/Kitply) with both side company pasted lamination (any colour) duly lipping (edge bending) on exposed surfaces complete with G profile handle of approved colour (01 No for each shutter) and soft closing hinges (02 Nos in each shutter) (Hettich/ Godrej/ IPSA) incl dismantling existing unserviceable boarding and thrown away from MOD area complete. |
| 91 | M&L for Stainless steel Cutlary basketof size 370mm x 485mm x 100mm made ofmin 4mm dia stainless steel wireand bottom of S S perforated sheet approved quality withsuitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge. ( Make: Godrej or equivalent approved by Engr-in-Charge” |
| 92 | M&L for“Stainless steel thalibasket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved qualitywith suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge.Make: Godrej or equivalent approved by Engr-in-Charge. ” |
| 93 | M&L for Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved qualitywith suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge.Make: Godrej or equivalent approved by Engr-in-Charge” |
| 94 | Drilling holes for pipes etc n. exc 25 mm dia (for gas pipe etc)complete all as specified and directed. |
| 95 | S&F in repair Wall mixer 3 in 1 inlet system withboth shower (hand shower with pipe and SS over head shower min 4\") complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed. |
| 96 | S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed. |
| 97 | S&F 1mm thick stainless steel kitchen sink with drainage boardwith plugs, washers and waste coupling and PVC waste pipeincludingfixing on half brick wall orcantilever brackets(angle iron )and connecting union overall size 915mm x 460mm,bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed |
| 98 | S&F stainless steel plate rack made of 0.50mm thick of over all size920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. |
| 99 | M&L PCC 1:4:8 type D-2,with 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. |
| 100 | M&L forburnt clay brick sub Class \"B\" work ( old size) straight or curved in plan exc 6 m mean radius, built in CM 1:6 incl soakage well and septic tank Comlete all as specified and directed |
| 101 | Do as per above item but except brick complete all as specified and directed. |
| 102 | Demolition and breaking up150mm dia drain pipes (salt glazed stone ware) set in cement mortar includingconcrete bed & haunching whererequired and removing away as directed and specified. |
| 103 | M&L for 150mm dia in bore HDPE DWC pipes laid in trenches and concrete bed to pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all specified and directed |
| 104 | M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for., complete for 50 users complete all specified and directedand shown in Drg No. CEBZ/TD/129 dt 14 Dec 2024, Sheet No. 1/3 to 3/3 |
| 105 | M & L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 M dia x 3.00M effective depth complete all as specified and directed and shown in Drg No. TD/309 dt 17 Feb 1986, Sheet 1/4 to 4/4 |
| 106 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in sub base of tilesall as specified and directed. |
| 107 | M&L for sand filling under floors including watering & consolidation concrete all as specified and directed. |
| 108 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed. |
| 109 | M & L for precast cement concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate) in , cover slabs (for manholes etc.) or Complete all as specified engg-in-charge |
| 110 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittingetc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 111 | M & L for modular point wiring with 1.5 sqmm (nominal area) PVC insulatedFRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and includingPVC rigidconcealed conduit of suitable size not less than 1.8 mm thick (ISI marked)with all accessories including suitable modular plate ( inner + outer) andsunken boxes of suitable sizes including 1.5 sqmmPVCFRLS insulated unsheathed copper conductormultistranded cable for continuous earth conductor connectedto common earth dolly,complete all as specified & directed for the following:- Note:-1.Proper colour coding is to be followed as per IS Specification.2. Cutting chases for point wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item. |
| 112 | One light/Wall mount fan/ Ceiling fan ,bell/buzzer point controlled by one switch6 Amp, SP, one way240 volts. |
| 113 | One multi pinsocket 6 Ampindependent. |
| 114 | One multi pinsocket 6 Ampon same board |
| 115 | Ditto, all as per item No 111 hereinbefore but using 2.5 sqmm (nominal area) multistranded copper conductor cable& 2.5 sqmm size PVC insulatedFRLSand unsheathed copper conductor cable FRLS for earth continuity ( green colour) for one 3 pin socket outlet 15Amp multi purpose independent point controlled by 16 Amp, switch, complete all as specified and directed. |
| 116 | Ditto, all as per item No 111 hereinbefore but using 4 sqmm (nominal area) multistranded copper conductor cable& 4 sqmm size PVC insulatedFRLSand unsheathed copper conductor cable FRLS for earth continuity ( green colour) for one 3 pin socket outlet 15Amp multi purpose independent point controlled by 16 Amp, switch, SP, one way, 240 VoltsforGeyser & AC Point complete all as specified and as directed. |
| 117 | Supply, fixing, stringing and drawingsubmain wiring with 2 run of single core, 6 sqmm PVC insulated and unsheathed, multi strandedcopper conductor cable FRLS usingcolour code forphase red and neutral black with and including6 sqmmPVC insulated and unsheathed FRLS conductor multi stranded cable in green colou connected to common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed.Note:-1.Proper colour coding is to be followed as per IS Specification.2.Two runs of single core cable with one run of earth cable of conduit shall be measured as one RM.3. Cutting chases for submain wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item. |
| 118 | S&F Modular switch 1 way 6A,1 module single, ( ISI marked) complete all as specified and directed. |
| 119 | S&F Modular Bell push 6A,2 module single, ( ISI marked) complete all as specified and directed. |
| 120 | S&F Modular switch 16A,1 module single, ( ISI marked) complete all as specified and directed. |
| 121 | M&L for Modular socket 16A , 240 volts 2/3 pin2 Module all as specified and directed. |
| 122 | S & F Socket, 6A - 2/3 pin combined 2 module, (ISI marked)complete all as specified and directed. . |
| 123 | S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed. |
| 124 | S&F Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed |
| 125 | S&F for Modular Fan step regulator 120W , 240 volts2 Module all as specified and directed. |
| 126 | Supply and fixing in repairof Bulb holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 127 | S&F in repair 20 watts Light emitting Diode (LED) opal diffuser tube light fitting wall mounting , indoor decorative PC LED Batten cover ensures soft and glare free lightening T5 LED battens, Integrated type,AC 230-240V, 50hz, with PMMA/PC diffuser, 4\" long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Serge Protection, IP 20, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed. |
| 128 | S&F in repair 10 wattsLight emitting Diode (LED)opal diffuser tube light fitting wall mounting , indoor decorative PC LED Batten cover ensures soft and glare free lightening T5 LED battens, Integrated type,AC 230-240V, 50 hz, with PMMA/PC diffuser, 2\" long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Serge Protection , IP 20, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed. |
| 129 | M & L in repair LED Bulb 12 watt 240 volt complete all as specified and as directed. |
| 130 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep with, blades, and frame and louvers |
| 131 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm sweep heavy duty with, blades, and frame and louvers. |
| 132 | Supply & Fix in repairsheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of20 A 240 Volts |
| 133 | S & F in repair High performance IP66 LED Streetlight 25 watt, with system efficiency of 125 lm/w housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 25W LED light with sustem efficiecy 125lm/w etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed. |
| 134 | Taking down of old U/SMCB SP 6 to 32 AMPs and Supply and fixing in repair amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.(i) SP 6 To 32 AMP |
| 135 | Taking down of old U/SMCB SPN 32 AMPs and Supply and fixing in repair 415V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.(I) SPN 32 AMP |
| 136 | Supply & fixingin repair Sheet Metal Enclosures vertical TPN distribution board with provision for & including 63 Amp MCCB 4 pole 16 KA as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB\"s/Isolators and flush to wall all as specified & directed including taking out old u/s DBs any capacity . |
| 137 | Taking down of old U/S MCB DB of 12 way and Supply & fixing in repair MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed |
| 138 | Taking down of old u/s earthing and M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all as as pecified . |
| 139 | Supply, laying and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 25 sqmm 3.5 core complete all as specified and directed.(Notes:- Excavation earth work sand cushioning PCC covers shall be measured and paid separately) |
| 140 | Sand cushioning for undergroundcables 8 cm before laying the cable and 15 cm after laying and streatching the cable, complete all as specified . (Note: Punned thickness shall be measured). |
| 141 | Material and labour for brick protection with sub class B bricks using old size bricks , laid dry, flat over cable , longer length of brick laid perpandicular to the cable in trenches all as directed. |
| 142 | M&L for taking down LT Aluminium multistranded/XLPE cable 25 sqmm 3.5 core all as specified and directed by Engr-in - Charge. |
