Tender For Provision Of Mesh Doors At Each Shutter Opening Of The Godowns, Turbo Ventilators At Maxi Sheds And Ms Window At Mini Shed Bottom Ventilators At Fci Fsd Sitarampur, Sitarampur-West Bengal
TDR : 52983811
Tender Notice
BOQ
11 Days Left
Sitarampur
West Bengal
Tender For Provision Of Mesh Doors At Each Shutter Opening Of The Godowns, Turbo Ventilators At Maxi Sheds And Ms Window At Mini Shed Bottom Ventilators At Fci Fsd Sitarampur
Name of Work: PROVISION OF MESH DOORS AT EACH SHUTTER OPENING OF THE GODOWNS, TURBO VENTILATORS AT MAXI SHEDS AND MS WINDOW AT MINI SHED BOTTOM VENTILATORS AT FCI FSD SITARAMPUR
Sl. No.
Item Description
1
Providing and fixing Mild steel expanded metal 20x60 mm strands 3.25 mm wide 2.24 mm thick with frame of 40x40x6 mm angle iron and using flats 30x6 mm for diagonal braces and central cross piecewith providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), all necessary fittings complete, including applying a priming coat of approved steel primer and two coats of synthetic enamel paint complete as per direction of Engineer in charge.
2
Providing and fixing mild steel expanded metal gate using expanded metal of size 20 mm x 60 mm with strands 3.25 mm wide and 2.24 mm thick, fitted in a frame of 40 mm x 40 mm x 6 mm angle iron with 30mm x 6 mm flats used for diagonal braces and central cross piece, including top channel and bottom rail for sliding operation, and providing and fixing wrought iron or mild steel wheels or rollers of 50 mm diameter or above, complete with all necessary fittings, clamps, nuts, bolts, or welding for proper fixing and erection in position, making good all damages caused during installation, and finishing the entire assembly with one coat of approved steel primer and two coats of synthetic enamel paint of approved make and shade, all complete as per direction of Engineer-in-Charge.
3
Supplying and installation testing and commissioning of turbo ventilatorssize 22\" in stainless steel 430 grade with approx weight 4.85 kg having a CFM-7Km/hr-2440 with blade length 360mm wings of 80mmand following specifications: Turbo ventilators available in stainless steel size- 22\" ss grade-430 ,No. of outer wing:24(22\") No. of inner wing:6(22\") ,Fan base:Nylon Top & bottom::ss 430 ,Inside material: Nylon Fan blade OD:600mm(22\"),Nylon blade ring:560mmfor 22\" Total fan height:360mm for 22\",self fabricating bearing
4
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primingcoat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
