|
| 1 | Surface dressing n exc 15 cm deep in soft/ loose soil complete all as directed. |
| 2 | Excavating over areas in soft/loose soil, exc 1.5 m deep but n exc 3 m in depth and getting out complete all as directed. |
| 3 | Excavating in trenches in soft/loose soil, exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sq m on plan and n exc 1.5 m in depth and getting out complete all as directed. |
| 4 | Excavating in trenches in soft disintegrated rock, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as directed. |
| 5 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and directed. |
| 6 | Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed complete all asdirected.. |
| 7 | M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and as directed. |
| 8 | M&L RCC (Nominal mix), 1:2:4 type B1 using 20mm graded crushed stone aggregatesas in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 9 | S&F TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams, retaining wall, etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 10 | S&F 7mm thick geocomposite drainage sheets, laid vertically on back of retaining wall complete all as specified and as directed.(Make:- Geocomposite sheet shall comply to relevant BIS, IRC & IRS specifications and as approved by GE). |
| 11 | M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in retaining wall/trenches or in floors complete all as specified and as directed. . |
