|
| 1 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 2 | M&L for non-skid colouredceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floorsset and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bedin CM 1:6 complete all as specified and directed. |
| 3 | M&L for non-skid colouredceramic tiles7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floorsset and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bedin CM 1:6complete all as specified and directed. |
| 4 | M&L Vitrified coloured tiles 7.5 to 10mmthick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed or bedding layer of cment mortar (1:6)complete all as specified and directed. (bed room and other room floor) |
| 5 | M&L for coloured glazed ceramic tilesin vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 6 | M&L 18/20mm thick black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed. |
| 7 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | M&L for 75mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 9 | M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in floor etc and similar work all as specified and directed. |
| 10 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigmentsneat cementto match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. |
| 11 | M & LMachine pressed precast concret interlocking paver block( Colour) any shape and size of 60mm including 50mm thick sand cusionthicknessall as specified by engineer-in-charge. |
| 12 | M & L50mm thick sand cusion for interlocking tiles all as specified by engineer-in-charge. |
| 13 | M&Lcement concretetype B-0, 1:2:4 mix ( 12.5 mm graded agg) in padding, roof kerbs or mud stops, rounded or chamfered on edgesand similar workall as specified and directed. |
| 14 | M & L preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush/ pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5kg/Sqm/2coats spray/brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM C2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardnessof not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer\"s instructions complete all as specified and directed. |
| 15 | Dismantling of wall lining and ceiling boards (fibere, pulp, insulation boards/slabs/blankets, any thickness. Including cover fillets |
| 16 | S & Ffor GI snap grid of size 605mm x 605mmsize to support the boars, tiles with GI tee section 35mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm and GI angle 25mm x 25mm x 1.40mm as on edge/sides including proper hanging arrangement with 4mm dia nodized galvnised iron wire and adjuster incouding 4mm thick Everest Non Asbestos fiber cement designer board (E-Board classic) size 60cm x 60cm fixed on ceiling on staples of snap grid and including making good the distrubed wall portion with CM 1:3 or with PCC, 1:2:4 type B1 ( using 20mm graded stone aggregates ) as required coplete all as secified and directed. |
| 17 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 18 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawingand drawing complete all as specified and directed. |
| 19 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water completeall as specified and directed. |
| 20 | M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applyingement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 21 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove and finished with appvoved weather paint as directed complete as per specifications and direction of the Engineer-in-charge |
| 22 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete completeall as specified and directed. |
| 23 | M&L brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 completeall as specified and directed. |
| 24 | M&L brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 but except brick completeall as specified and directed. |
| 25 | M&L for rendering 10mm thick plastering on concrete surfaces of ceiling in CM 1:3, finished the surfaceeven & smooth complete all as specified and directed. |
| 26 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall complete all as specified and directed. |
| 27 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall complete all as specified and directed. |
| 28 | Supply only liquid water proofing compound completeall as specified and directed. |
| 29 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of average 1mm thick Birla putty complete all as specified and directed. |
| 30 | M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removalof existing treatment with mechanical complete all as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of 1mm thick waterproofing puttycomplete all as specified and directed. |
| 34 | Taking up or down 15mm dia steel tubing and connections etc completeall as specified and directed. |
| 35 | S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors completeall as specified and directed. |
| 36 | Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) completeall as specified and directed. |
| 37 | Taking up or down 20mm dia steel tubing and connections etc completeall as specified and directed. |
| 38 | S&F 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors completeall as specified and directed. |
| 39 | Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) completeall as specified and directed. |
| 40 | Dismantling PVC water tanks exc 250 but n.exc 500ltrcapacity complete all as specified and directed. |
| 41 | Dismantling PVC water tanks exc 500 but n.exc 1000ltrcapacity complete all as specified and directed. . |
| 42 | S&Frotational moulded polyethene water storage tank 500 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug and check nuts completeall as specified and directed. |
| 43 | S&F rotational moulded polyethene water storage tank 1000 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug and check nuts completeall as specified and directed. |
| 44 | S&F in repair 1mm thick Steel sheet duccan suitable screws for 500/1000ltr PVC tank (For Monkey mirace), design and size approved by GE |
| 45 | M&L 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) completeall as specified and directed. |
| 46 | M&L in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( minimum weight 210 gms) completeall as specified and directed. |
| 47 | S&F in repairs stop valve (external threaded)cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed in bore of pipe 15mm, completeall as specified and directed. |
| 48 | S&F in repairs 15mm bore (external threaded) bib taps cast copper alloy cromium platedlong body fancy typewith crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specifed and directed. |
| 49 | S&F in repairs angle valve in repairs cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union,bore of pipe 15mm, complete all as specified and directed. |
| 50 | S&F in repair 15 mm bore pillar taps copper alloy with capatan heads chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe completeall as specified and directed. |
| 51 | S&F in repair 15 mm bore CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified & directed. |
| 52 | S&F in repair 15 mm bore CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified & directed. |
| 53 | S & F in repair 15mm bore angle valves fancy type two way CP with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete allas specified and directed. |
| 54 | S&F in repair Cabinate Mirror PTMT complete all as specified and directed.Make : Prayag or equivalent as approved by GE |
| 55 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and directed. |
| 56 | S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specifiedand directed |
| 57 | S & Fin repair Soap dish chromium plated complete all as directed |
| 58 | S & Fin repair Corner shelf with frame triple chromium plated complete all as specified and directed. |
| 59 | S & F in repair Toilet paper holder chromium plated complete all as specified and directed. |
| 60 | S & F in repair S/S towel rail 20 mm dia D type 600 mm long between flanges complete all as specified & directed. |
| 61 | S&F in repair CP health faucet with 1.5 m PVC connection as in repairs complete all as specified & directed. |
| 62 | S & F in repairs CP swivel shower rosecompleteall as specified and directed. |
| 63 | S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm completeall as specified and directed. |
| 64 | S&F in repairs stainless steel sink with dranage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm completeall as specified and directed. |
| 65 | S&Fin repair plate rack of 1mm thick stainless steel of size 900x750mm with three shelves complete all as specified and directed. |
| 66 | S&F in repairs 32 mm bore PVC pipe as in waste pipes for sinks & WHBscomplete all as specified and directed. |
| 67 | S&F in repairs PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified & directed. |
| 68 | S&F in repair flushing cistern 10 Ltrs capacity low level white with inlet ball & float valve and handle including brackets completeall as specified and directed. |
| 69 | S&F in repairs Internal kit including flush handle & floatfor low level flushing cistern completeall as specified and directed. |
| 70 | S&F in repairs PTMT waste coupling (half/full threaded) fixed with 32mm dia discharge pipe for WHB/Kitchen sink (Minimum weight 32mm- 45gms) completeall as specified and directed. |
| 71 | S&F in repairs 100mm dia PTMT grating (Min weight 25 gms) completeall as specified and directed.. |
| 72 | S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm completeall as specified and directed. |
| 73 | S&F in repair vitreous china wash basin white flat back, size 550X400 mm excluding taps, waste chain & plug porcelain stopper but including brackets, waste pipe, PVC connection CP waste copuling completeall as specified and directed. |
| 74 | S&F in repairs whiteVitreous china European wash down water closet pan fixing with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap completeall as specified and directed. |
| 75 | S&F in repairs Plastic seat cover for EWC solid type completeall as specified and directed. |
| 76 | S&F in repairs vitreous China squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe and including concrete bedding) complete all as specified as directed. |
| 77 | S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm completeall as specified and directed. |
| 78 | S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm completeall as specified and directed. |
| 79 | S&F in repair PVC (SWR) bends of 110mm radius to PVC SWR pipes completeall as specified and directed. |
| 80 | S&F in repair PVC (SWR) bends of 75mm radius to PVC SWR pipes completeall as specified and directed. |
| 81 | S & F in repair stainless steel curtain rods or 25mm dia as in doors/windows SS brackets fancy type including screws and other necessary fitting (Knob) for fixing brackets SS funnels for 25mm dia dropry rod fixed at each end of rods compete all as specified and directed. |
| 82 | Taking down chowkhats or frames not exc 1.5 Sqm each with shutters completeall as specified and directed. |
| 83 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm completeall as specified and directed. |
| 84 | Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed. |
| 85 | Taking down shutters of any descriptionexc 1 Sqm but not exc 2 each completeall as specified and directed. |
| 86 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides completeall as specified and directed. |
| 87 | S&F 35mm thick, 2nd class hard wood in glazed skelton shutters, open rebated and prepare to receive glass/gauge, with or without sash bar, edges of framing plain chamfered or rounded fitted with cut and mitred beads for scecuring glass etc. completeall as specified and directed. |
| 88 | M&L preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pinkprimer all as specified and directed. |
| 89 | M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girthand applying two coat of synthetic enameled paint over one coatof red oxide primer completeall as specified and directed. |
| 90 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all asspecified in clause No. 8B.2 at Sl page No. 143 to 144 and shownin drawingon sl page No 156of SSR 2010 respectively and as directed. |
| 91 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixingin opening as per specification completeall as specified and directed. |
| 92 | Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513\"D\" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 93 | S&F aluminium anodized 150mm long barrel tower bolt of extruded section completeall as specified and directed. |
| 94 | S&F mild steel sliding door bolt, 300 mm plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate completeall as specified and directed. |
| 95 | S & F aluminium alloy handles size 150mm fabricated type anodised completeall as specified and directed. |
| 96 | S&F butt hinges Stainless steel of 100mm size completeall as specified and directed. |
| 97 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staples completeall as specified and directed. |
| 98 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staples completeall as specified and directed. |
| 99 | Hacking out old broken glass (any thickness, size, quality or description) completeall as specified and directed. |
| 100 | M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane completeall as specified and directed. |
| 101 | M & L figured sheet glass 3.00mm thick pin headed type and glazing with oil puttycompleteall as specified and directed. |
| 102 | M&L 5.5 mm thick ordinary quality sheet glass and glazing with oil putty in square exc. 0.5 Sqm in each pane completeall as specified and directed. |
