|
| 1 | Rewiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS/HFFR PVCinsulated copper conductor single core cable and 1.5sq.mm FRLS/HFFR PVC insulated copper conductorsingle core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling asrequired. |
| 2 | Group B |
| 3 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit asrequired |
| 4 | 3 x 4 sq. mm |
| 5 | 3 x 1.5 sq. mm |
| 6 | 6 x 1.5 sq. mm |
| 7 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS/HFFR PVC insulated copperconductor, single core cable in surface/ recessed mediumclass PVC conduit as required. |
| 8 | 2X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 9 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 10 | Supplying and fixing following size/ modules, GI boxalong with modular base & cover plate for modularswitches in recess etc. as required |
| 11 | 2 Module (75mmX75mm) |
| 12 | 6 Module (200mmX75mm) |
| 13 | 12 Module (200mmX150mm) |
| 14 | Supplying and fixing following modular switch/ socketon the existing modular plate & switch box includingconnections but excluding modular plate etc. asrequired. |
| 15 | 5/6 A switch |
| 16 | 15/16 A switch |
| 17 | 3 pin 5/6 A socket outlet |
| 18 | 6 pin 15/16 A socket outlet |
| 19 | Supply of 1200 mm sweep, energy efficientceiling fanclass of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9,Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 20 | SITC of 10 W LED Bulkhead impact dust and water resistant luminaires with IP 66 rating with GI Protection Cover with wire mesh having size 25 mm x 25 mm spacing between them. |
| 21 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) |
| 22 | 12 way Double door |
| 23 | Supplyingandfixing 5A to32Arating,240/415V,10kA,“C”curve,miniature circuitbreaker suitable for inductiveload offollowing poles in the existing MCBDB complete with connections, testing and commissioning etc. as required. |
| 24 | Single pole |
| 25 | Double Pole |
| 26 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. |
| 27 | Providing & fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable as required. |
| 28 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 29 | Providingandfixing25mmX5mmG.I.stripin40mmdiaG.I.pipefromearth electrodeincludingconnectionwithG.I.nut,bolt,spring,washerexcavationandre- filling etc. as required. |
| 30 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same incase of recessed conduit as required. |
| 31 | 20 MM |
| 32 | 25 MM |
| 33 | 32 MM |
| 34 | SITC of LED Batten with polycarbonated round-shape diffuser, grey end cap,with fluorescentlamp including earthing, connection, testing etc complete as required( 20 Watt 6500 K ) |
| 35 | Supplying and fixing two module stepped typeelectronic fan regulator on the existing modular plateswitch box including connections but excludingmodular plate etc. as required. |
