|
| 1 | M & L for switch air break gang operated triple pole out door type unit on HT 11 KV 50 cycle AC suitable for current rating upto 400 Amps mechanically operated mounted on insulators (9 insulators) and frame with operating mechanism worked from ground level with earth switch and including locking arrangement complete with taking down old unserviceable complete all as specified and directed. |
| 2 | S & F Drop Out fuse (Copper) channel type fitted on two post insulator per pole per phase complete vertical type (6 insulators) connected with necessary nut bolts brackets including testing confirming to IS 9835 rating 12 KV, 200 Amps made of Gun metal complete with taking down old unserviceable all as specified and directed. |
| 3 | M & L for lightning arrester/surgeprotector 11 KV gradeheavyduty , singlepole , selfsupporting station,expulsion typeclass 65 KA capacity with all fittings complete all with taking down old unserviceable all as specified and directed. |
| 4 | M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stoneaggregate) as in foundation for pole,stay assembly etc complete all as specified and as directed. |
| 5 | M&L for PCC 1:2:4type B1 (using 20 mm graded crushed stone aggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed. |
| 6 | Supply and fixinggalvanised steel (GI)tubing light grade ISI marked100 mm dia including all fittings, laid across road in trenches, or across PCC drain, along electricpole or floor / wall for cable protection complete all as specified and as directed. |
| 7 | Supply and fixinggalvanised steel (GI)tubing light grade ISI marked80 mm dia including all fittings, laid across road in trenches, or across PCC drain, along electricpole or floor / wall for cable protection complete all as specified and as directed. |
| 8 | S & F HDPE DWC (Double Walled Corrugated) of 750N with RR, complete with all fittings of 110 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers as in cable protection complete all as specified and directed. |
| 9 | Dismantling concrete poles/ struts, any size including necessary excavation demolition of concrete transportation cost etc. and removing the old unserviceable rubbish etc all as specified and directed. |
| 10 | Material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 SP-55,11.00 meter long including painting all external exposed steel surfaces with two coats of aliminium paint over a coat of red oxide zinc chrome primer including marking pole numbers in a 15 cm dia yellow circle with number writting with blacksyenthic paint/ Stricker, includingpainting strips in alternate from top of coping upto 1.50m height, with three strips of black syenthaticpaint & two strips of Yellow/ Sky blue paint(as per existing pattern through out the circumference of pole), includingall internal surfaces and external surfaces upto the planting depth shall be painted with two coats of black bitumenous paint complete all as specified and as directed complete all asspecified. (Note:- Earth work, PCC work, shall be measured and paid separately.) |
| 11 | Dismantling of cross arms of MS channel or angle iron sections etc complete andsetting aside all as specified and directed. |
| 12 | Dismantling ACSR or AAC Conductors from the disturbed Span including Line Spacer, etc. Serviceable Materials Keep in Safe Custody for Re-use, complete all as specified and as directed. |
| 13 | Dismantling of insulators any type any size all as specified and directed. |
| 14 | S&F Aluminium Conductor Steel Reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc., fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc., complete all as specified and as directed.NOTE : Cost of Binding Wireis deemed to be included in the quoted Unit Rate. |
| 15 | Refixing only Cross-arms, Bracings, Supports, Clamps and Back Plates (serviceable materials i.e. Structural Steel Sections obtained from dismantling) including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed including painting complete all as specified and direted. |
| 16 | M & L for cross arms , bracing, supports , clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms and complete all as specified and as directed. |
| 17 | S&F Cradles, hexagonal/rectangular fabricated with Galvanised Steel Wire with 4.00mm dia including binding with Aluminium Binding Wire, complete all as specified and as directed.NOTE : Cost of Binding Wire and dismantling is deemed to be included in the Quoted Unit Rate. |
| 18 | S&F Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the polecomplete all as specified and as directed.NOTE : Cost ofdismantling is deemed to be included in the Quoted Unit Rate. |
| 19 | M & L for mild steel nuts, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long and diameter of neck 5 to 10 mm, complete all as specified and directed. |
| 20 | M & L for Disc type insulators, porcelain, vitreous 145 mm height, 255 mm dia and socket type whit brown and green, 11000 volts grade, single disc assembly with tension clamps for conductors , complete all as specified and as directed. |
| 21 | M & L for pin type , porcelain, vitreous brown insulator of size 150mm height, 150mm dia 11000 volts grade including one galvanized mild steel spindle with two galvanized iron washers and one galvanized iron nut complete all as specified and as directed. |
| 22 | S & F loop type insulator vitreous porcelain white orbrown with over all dimension 90mmx140mm with 25.5 mm clearance hole complete all as specified and as directed. |
| 23 | M & L for stay assembly complete with accessories as shown in elect plate No-1 dia to stay 20mm dia rod 1800 mm long including MS galvanized stay plate of size 300mm x 300mm x 6mm thick and galvanized thimble after dismantling of unserviceable stay set (above GL) complete all as specified and as directed.)Note: Loop type insulator, excavation in earth work, PCC foundation shall be measured and paid separately under appropriate item). |
| 24 | S&F Galvanised stay strand, 7/4mm including dismantling old one all as specified and directed. |
| 25 | S&F Galvanised Steel wire 4 sqmm as earth wireincluding dismantling old one all as specified and directed. |
| 26 | M&L air break isolator switch rotating type outdoor triple pole double berak with earth switch suitable for horizontal mounting provided with locking arrangement at ON/OFF Position , 33 KV with current rating 630 Ampsincluding taking down old unserviceable complete all as specified and as directed.Make-Jaipuria Brothers |
| 27 | Supply and Fixing Lightning Arrestor HT 33 KV 65 KA explusion type including taking down old unserviceable lightening arrestors complete all as specified and as directed. |
| 28 | S&F disc type Insulator ( three disc assembly) porcelain vitreous, white brown or green 145 mm height and 255 mm dia ball and socket type with tension clamp galvanized iron nutfor conductors working pressure 33000 volt grade complete all as specified and as directed. |
| 29 | M&L Pin type Insulator Double stack type porcelain vitreous, white brown or greenball and socket type with tension clamp galvanized iron nutfor conductors working pressure 33000 volt grade complete and all as specified and directed. |
| 30 | M&L cable jointing kit for 33 KV grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 120 to 185 sq mm including taking down old u/s joint kit complete all as specified and as directed. |
| 31 | M&L cable jointing kit for 33 KV grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 240 to 400 sq mm including taking down old u/s joint kit complete all as specified and as directed. |
| 32 | Supply, laying and testing aluminium HT cables, stranded compactedcircular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, & overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with upto date amendments, . laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc, 33 kV (E) grade, of size 3 core 240 sq mm. |
| 33 | M & L Painting ofsteel poleup to 12 mtr heightwith cross arms, clamp of any length and shape for LT overhead line/ for street lightwith two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface,including marking pole numbers in a 15 cm dia yellow circle with number writting with blacksyenthic paint/ Stricker, includingpainting strips in alternate from top of coping upto 1.50m height with three strips of black syenthaticpaint & two strips of Yellow/ Sky blue paint(as per existing pattern) through out the circumference of pole, including removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with putty as per existing thickness and applying one coat of white washing on PCC copping of pole and re-numbering of pole with approved size of letter ( Example - P- 001) with synthetic enamel paint of white colour background and black colour lettering complete all as specified and as directed. |
| 34 | Boring of holes under road, pavement, hard standing for cable protection pipe upto 150 mm bore dia with necessary equipment/T&P,complete all as specified and as directed. Note : Pipe to be measured separately. |
| 35 | Material andlabour for earthing complete with Galvanised steel earth plate electrode 600x600x6 mmmm buried directly in ground (Earthpit not less than2.25m below ground level) with top edge of theplate not less than 1.5m below normal groundlevel, connected to GI strip 32 x 6 mmasearth lead by means of bolt, nuts, check nutsandwashers of galvanised iron or steel, upto 7.5mlength, earth strip protected by andincluding 40 mm diaGI pipe (md grade) andconnected to main test point or body of pole/pannel or lightening arrester of main controlling switch as directed including concrete pit in PCC(1:3:6)type C1 , Precast RCC(1:2:4)TypeB1 coverslab of size 54x54x5 cm reinforced with 8 mm dia TMT bars @ 100mm C/C bothwayswith onehandle for lifting made out of 10 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm boreGI Pipe (Medium Grade) for watering, Charcoal andsalt in alternate layers of 15 cm (Compacted Thickness) around the earth electrode including necessary excavation, earth work in any typeof soil anddisposal of spoil to a distance n.exc50 m andnecessary testing complete all asshown in Electrical Plate No 3 of SSRPart-I.NOTE : 1. The unit rare includes for protectionh GI pipe of 40mm and watering pipe of 20mm bore including excavation for earth pit in any type of soil/disintegrate rock. 2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to acheive desired result as the soil resisitivity is very high. 3. The cost of GI wireincluding protection pipe,from top of earth plate upto 7.5 meter above/below ground level is deemed to be included in the unit rate. 4. All the joints in GI wire and connectgion with earth plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5.Costing of welding and nut bolts are deemed to be included in the unit rate |
| 36 | M&L Brick work with flyash bricks old size bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as directed. |
| 37 | M & L for 15mm thick in cm (1:4) rendering on fair face of brick work finished fair and even complete all as specified & directed. |
| 38 | M & L for hardcore gauge n exc. 63 mm graded aggregate deposited, spread in levelled in layers not exceeding 15cm thick& rammed to true surface complete all as directed. |
| 39 | Material and Labour precast reinforced cable route indicator ofsize 1300x300x100 mm duly written \"HT CABLE\" in block letter, duly engrave as MES and painted with synthetic enamel paint over one coat of primer and fixing with PCC (1:3:6) C2 using 40 mm graded stone in 600x450x300 mm for fixing route indicator complete all as specified and directed including taking out old u/s indicator all as directed. Note :- (i)Unit rate of item includes excavation, PCC foundation for erection of route indicator.(ii) Slab of route indicator to be provided with proper TMT bars in reinforcement .(iii) Route indicator RCC slab to paintingwith two coat ofred/blue colour synthetic enamel paint over on one coatof white primer base all as specified and directed by Engr - in - Charge. |
| 40 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed |
| 41 | Taking down cable jointing kit for 11 KV grade cable for outdoor/ indoor / straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 to 185 sq mm. |
| 42 | Supply, laying and testing aluminium HT cables, stranded compactedcircular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, & overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with upto date amendments, . laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc, 11 KV (E) grade, of size 3 core 185 sq mm complete all as specified and as directed. |
| 43 | Supply, laying and testing aluminium HT cables, stranded compactedcircular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, & overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with upto date amendments, . laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc, 11 kV (E) grade, of size 3 core 150 sq mm complete all as specified and as directed. |
| 44 | Supply, laying and testing aluminium HT cables, stranded compactedcircular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, & overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with upto date amendments, . laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc, 11 kV (E) grade, of size 3 core 120 sq mm complete all as specified and as directed. |
| 45 | Supply, laying and testing aluminium HT cables, stranded compactedcircular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, & overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with upto date amendments, . laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc, 11 kV (E) grade, of size 3 core 95 sq mm complete all as specified and as directed. |
| 46 | Re-Laying/Fixing or Passing through Pipe, XLPE insulated, Armoured, Electric power UG Cable (Heavy Duty) with Aluminium Conductor, 11000 Volt Grade, Nominal Cross-Sectional Area 95 Sqmm 3 Core to 185 Sqmm 3 Core complete all as specified and as directed. |
| 47 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 150 to 225 sq mm all as specified and directed. |
| 48 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 70 to 120 sq mm all as specified and directed. |
| 49 | Supply and fix cable jointing kit for 11 KV grade cable for indoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 150 to 225 sq mm all as specified and directed. . |
| 50 | Supply and fix cable jointing kit for 11 KV grade cable for indoor terminal heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 70 to 120 sq mm. |
| 51 | Supply andfixing cable jointing kit for 11KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing materialand accessories suitable for 3 core XLPE armoured Al conductor cable of size 120 to 185 sqmm complete allas directed. |
| 52 | Supply andfixing cable jointing kit for 11KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing materialand accessories suitable for 3 core XLPE armoured Al conductor cable of size 70 to 95 sqmm complete allas directed. |
| 53 | Supply andfixing cable jointing kit for 11KV Aerial Bunch Cable for single core for outdoor terminationHeat shrink type joint complete with jointing materialand accessories suitable for 120 sqmm single core to 185 sqmm single core Al conductor cable complete allas directed. |
| 54 | Restringing of sagged ABC (Aerial Bunch Cable) XLPE HT (11 KV) Cable of Size 185 sqmm 3 Core with help of hydra/ machinery including fixing hanging on MS Clamps all as directed by Engr-in-Charge. (Note : (a) ABC Cable to be rolled and unrolled properly. (b) Rate of Brackets, Clamps, Nut bolts to be catered in this item rate) |
| 55 | Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soilNote : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. |
| 56 | Add to Item no 54 for each additional 1.5 m or part or part thereof in depth beyond the first 1.5 complete all as specified and as directed. |
| 57 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin hard/dense soil complete all as specified and as directed. |
| 58 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 59 | Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured). |
| 60 | M & L un-reinforced precast concrete cable cover, class HV, type I with peak, size 300mm x 180mm x 40mm complete all as directed. |
| 61 | Re-laying only un-reinforced precast concrete cable cover/old Brick in Trenches for Under Ground Cable Protection (Serviceable Materials obtained from Item No. 38 here-in-before), complete all as directed. |
