Educational and Research Institute Private Organizations Closing in 0 days TDR #52978168

Tender for purchase and installation of photocatalytic reactor

Issued by Private Organizations · irinjalakuda, Kerala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jan 2026
0 days left
EMD
9000
Bank guarantee accepted
Document Fee
2700
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
irinjalakuda → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

purchase and installation of photocatalytic reactor , photocatalytic reactor , minimun 8-watt lamps, configured with not lessthan 6 top- and 8 side-lamp positions, controlled by switches. dimensions: minimum - external: 18” wide, 21” deep (with exhaust) and 16.5” high (46 x 53 x42 cm), internal: 12” wide, 12” deep and 8.5” high (30 x 30 x 22 cm) input power rating: 220 vac, 50/60 hz cycle, 3 amps lamp power for use with 8 watt lamps with f8t5 connectors. approximate length 12 inches. housing material: external: stainless steel internal (chamber): al 5052-h32 (aluminum alloy) ambient temperature: can be maintain between 10 ºc and 35 ºc chamber temperature: not higher than 3-4 ºc above room temperature humidity: must be between 0% and 95% (non-condensing) portable carousel: bottom plate height: approx. 2.5” above chamber floor, must hold atleast 16 tubes, speed: minimum 4 rpm, batteries required, diameter: 5”, must accommodate samples in test tubes of up to 5/8” (16mm) in diameter portable turntable: diameter: 9 3/16 inches, height: approx. 2.5” above chamber floor, speed: 4 rpm, batteries required magnetic stirrer: speed: adjustable, min speed: 100 rpm, max speed: 1000 rpm, max volume that can be stirred: 0.26 gallons (1l) power meter: calibration factor for visible light provided by manufacturer, calibration factor for photo reactor lamps provided by manufacter, requires 9 v transistor type battery (one provided), display: 3.5” lcd, sampling time: 0.4 sec, operating temperature: 0 - 50ºc at a maximum of 80% relative humidity, batteries required gas inlet: rear mounted bulkhead gas connector, gas should not dissipate in the chamber, should be used with environmental chamber only. hour meter: built-in to the unit, keeps track of the number of hours the unit has been in operation, safe exhaust: abs material, exhaust tube provided: 4” diameter, max length: ~ 8’, built-in fan: 3100 rpm, airflow: 110 cfm safety interlock: turns off lamps when door is open, indicator led’s

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 03-Jan-2026 Extension of E tender Date 09-Jan-2026

AI Tender Summary

OUR REF NO 52978168
AUTHORITY Private Organizations
TENDER VALUE Ref. Documents
LAST DATE 09-01-2026
Authority
Authority Name St Joseph’s University
Work Description purchase and installation of photocatalytic reactor , photocatalytic reactor , minimun 8-watt lamps, configured with not lessthan 6 top- and 8 side-lamp positions, controlled by switches. dimensions: minimum - external: 18” wide, 21” deep (with exhaust) and 16.5” high (46 x 53 x42 cm), internal: 12” wide, 12” deep and 8.5” high (30 x 30 x 22 cm) input power rating: 220 vac, 50/60 hz cycle, 3 amps lamp power for use with 8 watt lamps with f8t5 connectors. approximate length 12 inches. housing material: external: stainless steel internal (chamber): al 5052-h32 (aluminum alloy) ambient temperature: can be maintain between 10 ºc and 35 ºc chamber temperature: not higher than 3-4 ºc above room temperature humidity: must be between 0% and 95% (non-condensing) portable carousel: bottom plate height: approx. 2.5” above chamber floor, must hold atleast 16 tubes, speed: minimum 4 rpm, batteries required, diameter: 5”, must accommodate samples in test tubes of up to 5/8” (16mm) in diameter portable turntable: diameter: 9 3/16 inches, height: approx. 2.5” above chamber floor, speed: 4 rpm, batteries required magnetic stirrer: speed: adjustable, min speed: 100 rpm, max speed: 1000 rpm, max volume that can be stirred: 0.26 gallons (1l) power meter: calibration factor for visible light provided by manufacturer, calibration factor for photo reactor lamps provided by manufacter, requires 9 v transistor type battery (one provided), display: 3.5” lcd, sampling time: 0.4 sec, operating temperature: 0 - 50ºc at a maximum of 80% relative humidity, batteries required gas inlet: rear mounted bulkhead gas connector, gas should not dissipate in the chamber, should be used with environmental chamber only. hour meter: built-in to the unit, keeps track of the number of hours the unit has been in operation, safe exhaust: abs material, exhaust tube provided: 4” diameter, max length: ~ 8’, built-in fan: 3100 rpm, airflow: 110 cfm safety interlock: turns off lamps when door is open, indicator led’s
Basic Detail
Tender No B5-138/FIST/2025
Bidding Type Tender
Location
City irinjalakuda
State Kerala
Key Dates
Publish Date 03 Jan 2026
Submission Date 09 Jan 2026
Open Date 13 Jan 2026
Finance
Tender Value Ref. Documents
Tender Fee 2700
EMD 9000
Exemption Available
Document List
BOQ_1378107.xls
d79ea25c-ed3c-43cf-b132-3688738cbe41.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 09, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jan 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1378107.xls

html

d79ea25c-ed3c-43cf-b132-3688738cbe41.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders