|
| 1 | Material and labour for cleaning & clearing manholes by taking off manhole covers and re-fixing the same after cleaning of any description, underground any depth by removing any type of blockage including de-silting and de-chockingand flushing after cleaning, clearing of manholes. Sludge/ sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MoD land as directed by Engineer-in-Charge, upto 150mm dia sewage lines complete all as specified and directed. |
| 2 | M&L for Removal of blockage in between two manholesof underground sewage line of any type and size upto 300 mm dia by means of rodding with vibrations/drilling concept complete allas specified and directed. |
| 3 | Notes for Ser item Nos 1.00 to 2.00:-1. Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc.2. Minimum 02 No of safaiwala alongwith necessary tools will be required to reportto complaint cell (Sanyat Line) to collect the complaint slip from concrened JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, contractor shall provide the same to meet the requirements. As per numbers of complaints additional Sweeper/Helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint. |
| 4 | Cleaning ofseptic tanks/soakage wells/sewage lines using Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tankerhaving water fitted high pressure jetmachine for cleaning and desludging of sewage line, shall be used by the contractor as per scheduled programme in writingand completion of each jobto the entire satisfaction of Engineer-in-Charge as instructed. (NOTE : In case contractor fails to deploy the machine as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment.) |
| 5 | Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 6 | S&F Factory made precast heavy duty drain/ manhole covers includingMS frame and including reinforcement as per IS 12592 : 2002 with MES engraved in it and with specified thickness complete all as specified and directed . |
| 7 | M&L for RCC work (Nominal Mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers ,Shelves etc and like complete all as specified and as directed. |
| 8 | M&L for TMT bars of8 mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 9 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified. |
| 10 | S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed by Engineer-in-Charge. |
| 11 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches, pillers etc but excluding ashler facings dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:4) with Sub class ‘B’ brick including manhole raising,drains,septic tanks footpath,boundary wall etc complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed. |
| 14 | M&L 15mm thick renderingin cement mortar 1:6 on fair faces of new or old brick works or concrete work finished even and fair complete all as specified and as directed. |
| 15 | M&L 15mm thickrendering in cement mortar 1:4 on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over and incl a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified. |
| 18 | S&F 110mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint laid in trenches/ fixed to wall with MS clamps including taking down pipes complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F PVC (SWR) bends any radius 110 mmmm dia including taking down complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed. |
| 21 | S&F DWCPE (SN8) nominal size 200 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring,rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 22 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints aid in trenches/fixed to wall including clamps as required, fixed as in repair complete all as specified. |
| 23 | S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 24 | Excavation as in trenches in any type of soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deeplines and getting out complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 26 | Removing excavated material/Malba to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed. |
| 27 | Dismantling of 150 to 300mm bore SGSW or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 28 | Supply and laying 150mm diaSalt glazed stoneware drain pipes Grade \"A\" laid in trenches and jointed with cement mortar 1:1 andspun yarn soaked in neat cement slurry, testing complete all as specified and directed. |
| 29 | S&F in repairs of 75mm diameter of outlet in mm PVC (SWR) floor trap/Nahani trap with stainless steel gratings including jointing with solvent cement, complete all as specified and directed. |
| 30 | M&L for PVC (SWR) 150mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition and breaking up existing unserviceable PVC pipe and removal of debris complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150 mm bore SGSW / RCC pipe, complete all as specified and directed. |
| 33 | Cutting shrubs wild gorwth/treesand removing complete vegetation growth from walls , roofs , shaft areaincluding taking out roots from roof/brick work or concrete surfaces and making good the distrubed surfaces with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and disposing the rubbish from the site (MOD land) for a block up to 9 storey buildingcomplete all as specified and directed.Note:-The itemsshall be carried out in multi storied buildings (G+8) which may require scaffolding or Jhulla arrangements or any other T&P items are included in the quoted rates by the contractor. |
| 34 | M&L providing vitreous china ware squatt pan, orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding, fIxed in repair complete all as specified and directed..Make Hindware/parryware/Cera. |
| 35 | S&F in repairs Viterious China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing flush pipe,grating and Union for discharge pipe. complete all as specified and directed. |
| 36 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 200 mm internal dia after they are laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & fixing in repairs vitreous china wash down water closet EWC pedstal pattern whiteincluding PVC seat cover with aluminium hinging devices & EWC Jet chromium plated with 1.00 mtr long, PVC connection pipe and PVC valveless syphonic action type flushing cistern low level 10 Ltr Capacity, white, with inlet , ball valve, float and handle including brackets etc complete all as specified and directed by Engr-in-Charge . |
| 38 | Supply and fixing as in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed. |
| 39 | Supply& fixingas in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed. |
| 40 | Desilting and cleaning of open drains of any section manually including desilting soild/semi solidmaterials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed by Engineer-in-Charge. |
| 41 | Cleaning and removing all scale and dirt, etc, from water tanks,capacity exceeding 250 litre but not exceeding 500 litre and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning and writing \"Tank Cleaned on DD/MM/YYYY\"using synthetic enamel paint of letters not below 15 cm height complete all as specified and directed. |
| 42 | Cleaning and removing all scale and dirt, etc, from water tanks,capacity exceeding 500 litre but not exceeding 1000 litre and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tankand writing \"Tank Cleaned on DD/MM/YYYY\"using synthetic enamel paint of letters not below 15 cm height connection fitting in the same position after cleaning complete all as specified and directed. |
| 43 | S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 15 mm bore pipe, complete all as specified and directed. |
| 44 | S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed. |
| 45 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of oldpipes complete all as specified. |
| 48 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified. |
| 49 | S&F CPVC Brass Elbow fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 50 | S&F CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 51 | S&F CPVC Brass TEE fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 52 | S&F CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 53 | S&F CPVC Brass UNION fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 54 | S&F CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 55 | S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 56 | S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified. |
| 57 | Supply and fixing 15mm dia PVC connection with brass nut, of length 600 mm,fixed as in repairs, complete all as specified and directed. |
| 58 | S&F as in repairs 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 59 | Supply and fixing long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 60 | Supply and fixing angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 61 | S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed. |
| 62 | S&Fas in repairs Chromium plated shower roses 125 mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 63 | S&Fin repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall,with chromium plated brass screws, complete all as specified&directed. |
| 64 | Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified |
| 65 | Supply and fixing in repairs brass chromium plated tubular towel ring having dia of ring not less than 150mm fixed to walls with necessary screwscomplete all as specified |
| 66 | S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed. |
| 67 | Providing precast cement concrete louvres and jallies, 25mm thick(measured solid), Type B0 1:2:4 (using 12.50 mm graded stone aggregate) including allmouldings andprecast top and bottom frame complete all as specified and directed |
| 68 | Providing services on related to plumbing workcarried out by deploying a team of plumbers with helper as required for 01 xshaft areaofmultistory (G+8) building from top of roof slap up to bottom of bldg floor wise through shaft areain one go for repair / maintinanceto leakageing , damaged , broken , loose PVC (SWR) Pipe/CPVC Pipe (any dia and size) , bends etcincluding taking down, easingand refixing in the same position as required etc complete all as specified and directed.Note :- (1)In case contractor fails to complete the above task as per scheduled programmea damage of Rs 500/- per day shall be deducted from his payment. 2) Necessary T&P, ladders,minor consumable viz white cementetc, equipments and safety gear shall be provided by the contractors.3) All material/ accessories/Items as required for maintenance shall be measured under relevant item of BoQ. (4) The abovework /task will also include forHigh rise bldgs and shaft area of high rise bldgs (One shaft work as one Job) |
| 69 | S & F in repair CPjet sprayfor EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed. |
| 70 | S&F Poyethalene syphon kit assembly (any type as per requirement at site) for PVC Low level flushing cistern, fixed in repairs, complete all as specified and directed. |
| 71 | S&F in repairs of Brass spindle (number 1 to 6) suitable for 15mm bib cock/stop cock/concealed stop cock/angle cock/ mixers, complete all as specified and directed. |
| 72 | Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed. |
| 73 | Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed. |
| 74 | S&F 500 litres capacity (triple layered) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed |
| 75 | S&F 1000 litres capacity (triple layered) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed |
| 76 | S&F as in repairs PVC lid / cover suitable for PVC water tank 500/1000 litre capacity incl removing old broken lids complete all as specified and as directed. |
| 77 | S&F CP grating droom of size 100/125/140 mm in round or square shape for out let of water etc complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F in repair PVC waste pipe 32mm/40mm dia fixed complete all as specified & directed |
| 79 | Demolition of plain cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified & directed. |
| 80 | M&L for 100 mm thick cement concrete type D-2,1:4:8 (using 40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified. |
| 81 | M & L for machine made Rubber moulded prepolished colored precast concrete interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over andincluding 25mm average thickness sand cushioning complete all as spfd and directed. |
| 82 | Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed. |
| 83 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid dry in any mortar complete all as specified & directed |
| 84 | M & L machine cut Kota Stone slab as in flooring / landing of stairs , 18-20mm thick laid overand including 15mm thick cement screed bed in CM 1:4 , laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and polishing complete all as specified |
| 85 | M&L machine cut Granite slab 16 to 18 mm thick fixed as in repairs for dado, wall cladding, garden walls, staircase, steps, pillars,skirting/dado, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshingetc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd. |
| 86 | Dismantling of floor tiles, hearth orwall tiling including cement mortor bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 87 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 Sqm but n.exc 0.18 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match coloure tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in Charge. |
| 88 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 Sqm but n.exc 0.36 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match coloure tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in Charge. |
| 89 | M&L glazed ceramic tiles 300x450x7 to 8 mm thick coloured tilesin vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to matchas in dadoincluding highlighter tilesover 10mm thick cement plaster in CM (1:4), complete all as specified and directed.Note: Pattern of tile shall be approved by GE |
| 90 | M&L vitrified ceramic tiles light shade 8 mm to 9 mm thick (square/rectangular) polished,area of each tiles exc 0.16 sqm but n.exc 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 15mm thick screed bed in CM 1:6,complete all as specified and directed. Note: Pattern of tile shall be approved by GE |
| 91 | Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed. |
| 92 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures\"s instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge |
| 93 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures\"s instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge |
| 94 | Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of cement base paint over a coat of alkali resistant water base primerincluding necessary scaffoldingwhere required complete all as specified & directedComplete removal of the existing treatment |
| 95 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including 1 mm thick wall care putty complete all as specified & directed. |
| 96 | Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc. complete all as specified and directed by engr-in-charge |
| 97 | S & F Mild Steel Framed work as in Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills,tubular trusse and similar worketc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge. |
| 98 | S&F mild steel work as in joist channels, angle or tee section, fixed independently w/o connecting plate conforming to Fe.290.Gde-E-165, incl cutting tops to shape as directed, drilling holes,notching for wire, welding work etc.flat iron fillets incl all necessary drilling, bolting or riveting, etc. ,drilled and countersunk for balusters running bars,nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;, and similar work including necessary cutting,drilling,welding etc. complete all as specified and directed by engr-in-charge |
| 99 | Supply & fixed in repairsGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-in-charge |
| 100 | Restraining and rescecuring Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)complete all as specified and directed by engr-in-charge. |
| 101 | S&F in repairs of concertina coil fencing with punched tape, 600mm dia, , having 50 Nos rounds per 6m length, laid on ground orfixing the same on Y-shaped angle iron with necessary G.I staples / GI clips to retain in horizontal position including necessary bolts, fasteners and binding wire complete all as specified and directed. |
| 102 | S&F in repairs of concertina coil fencing with punched tape, 450mm dia, , having 50 Nos rounds per 6m length, laid on ground orfixing the same on Y-shaped angle iron with necessary G.I staples / GI clips to retain in horizontal position including necessary bolts, fasteners and binding wire complete all as specified and directed. |
| 103 | M&L for preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved, complete all as specified and directed. |
| 105 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate. |
| 106 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate. |
| 107 | Supply and fixing as in repair 15mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 108 | Supply and fixingas in repair 20mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed. |
| 109 | Cleaning of sewage system including WCs, WHB, bottle traps, nahani and floor traps, soil/waste/rain/drain pipe running on external walls/cancealed type of building including junctions and removing all type of blockagesin any situation bymechanical means, and disposing waste materials out side defence land strictly as per Hon\"ble Supreme Court directions,complete all as specified and as directed by the Engineer-in-Charge. NOTE:a) The above task shall be caried out by deployinga team, comprising 02 safaiwalasfor Md Accn/OTM Accn at Sanyat line, New Moude Line and OTM accn to certain unitb) Where there is requirement of work involving scaffoldings and jhula, Contractor shall deploy the additional skilled team of workers expert in working on jhullas in high rise bldgs. c) If contractor fails to attend/clean a given complaint (received on any working days till 6 PM) on the same day, is liable to be charged a damage of Rs 1000/- per day per complaint. Recovery for same will be deducted from his payment. d)One mechanical pump diesel/petrol for dewatering sludge water, safety belt, ladder, gloves gasmask, bucket to remove sludge, mechnical device required to reach work at difficult locations upto 9 stories shall be made available all time at site. |
| 110 | Providing services on related to welding & black smith work for reapir to steel windows, shutters , grills , doors , rolling shutters, and other steel works etc including taking down, easingand refixing in the same position as required etc complete all as specified and directed. Note- (1).The above task shall be carried out by deploying minimum 01 welder having black smith skillson day basis From 0900 hrs to 1700 Hrs. (2) In case contractor fails to complete the above task as per scheduled programmea damage of Rs 500/- per day shall be deducted from his payment. 3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine , equipments and safety gear shall be provided by the contractors.4) All replacement material/ accessories/Items as required shall be issued from MES store to complete the task and dismantled old unserviceable material shall be depositedto MES store yard. (5) The abovework /task will also include forHigh rise bldgs and shaft area of high rise bldgs. |
