|
| 1 | Surface dressing n exc 15 cm deep complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil completed all as specified and directed. |
| 3 | Returning fillng in, including spreading , levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 4 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.50M above the starting point complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, floors etccomplete all as specified and directed. |
| 6 | M&L for RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in foundation footing,Plinth, lintel / roof beam complete all as specified and directed. |
| 7 | M&L for RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | M&L for RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and directed. |
| 9 | M&L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed. |
| 10 | M&L for mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed. |
| 11 | M&L for form work to sides of concrete, foundation,footings base of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter complete all as specified and directed. |
| 12 | M&L for form work tosoffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed. |
| 13 | M&L for form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc. complete all as specified and directed. |
| 14 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 15 | M&L for fly ash brick work with old size briccks having crushing strngth not less than 75kg/sqcm, straight or curved on plan bricks built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on fair faces of brick wall surfaces finished fair & even without using extra cement complete all as specified and directed |
| 17 | M&L for rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for rendering 5 mm thick in CM 1:3 on ceilingsfinished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for hard core broken brick gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for 75mm PCC 1:4:8 type D-2(40 mm graded stone aggregate ) as in floor complete all as specified and directed. |
| 21 | M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed. |
| 22 | M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 23 | M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 24 | M&L for7 to 8 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile area(300x450/300x600 mm size approved by GE), as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 25 | M&L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. |
| 26 | M&L for machine pressed cement Concrete factory made coloured glazedinterlocking paver blocks any shape and size confirming to IS 15658 -2006 of60mm thickness, M-35 Grade.machine pressed pattern and colour as approved by GE. |
| 27 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weightcomplete with and including necessary form work etc complete all as specified and directed. |
| 28 | M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed. |
| 29 | M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately) |
| 30 | M&L for APP polymeric water proofing membrane, minimum 3mm thick and weight 4 Kg/Sqm with mineral. minimum 3.50 Kg per Sqm without mineral with rich bitumen and select polymers blended to obtain excellent heat resistant& cold resistant , black finish reinforced with non-wovenpolyester matt, with a thermo fusable finish laid over compatible bitumen primer @ 0.50 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 100mm and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions completed including removal of existing treatment all as specified and as directed. Note: (i) Coved fillets in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, applied @1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm (minimuim) shall be made in coved fillet at the junction of roof and parapet wall/ mumty Chimny/ other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (vi) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 mm/Sqm (vi) Above aspects are deemed to be included in quoted rate. |
| 31 | supply only integral water proofing Liquid complete all as specified and directed. |
| 32 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 33 | S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 34 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box section complete all as specified and directed as appended below:-(a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , withS S hinges complete (g) Making good of wall surface to match with existing surface complete. |
| 35 | S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 36 | S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 37 | S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed. |
| 38 | S&F 150 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed |
| 39 | S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed. |
| 40 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 41 | S&F 20mm dia gun metal , globe or gate valves, with iron wheel head, screwed,both ends for iron pipeand fixed complete all as specified and directed. |
| 42 | S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. |
| 43 | S&F20 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. |
| 44 | S&F 20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed. |
| 45 | S&F Powder coated aluminium ventilators box type with louvers & wire mess neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick(iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 46 | S&F vitreous china coloured wash hand basin with pedestal ofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specified and directed. |
| 47 | S&F fancy type 150mm size square brass CP shower rose complete all as specified and directed. |
| 48 | S&F 15 mm bore dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed. |
| 49 | S&F 15 mm bore dia fancy type chromium plated brass two way bib cock with flange complete all as specified and directed. |
| 50 | S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 51 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 52 | S&F stainless steel of AE - SI 316 grade tubulartowel ring including apair of CP brass bracket complete all as specified and directed. |
| 53 | S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. |
| 54 | S&F 15 mm bore dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type) for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F 15 mm bore dia fancy type chromium plated brass angle valve complete all as specified and directed. |
| 56 | S&F vitreous China wash down closet pan (pedestal pattern) with \"P\" or \"S\" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. |
| 57 | S&F vitreous China bowl urinal flat backsize430x370x340 with grating and union for discharge pipe including flushing cistern flush pipe and waste pipe and all coplete acceries for urinal complete all as specified and directed. |
| 58 | S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. |
| 59 | S&F Brass CP health faucetwith 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body complete all as specified and directed. |
| 60 | S&F PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. |
| 61 | S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed. |
| 62 | S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed. |
| 63 | S&F PVC (SWR) 110mm bore bends anyradius complete all as specified and directed. |
| 64 | S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed. |
| 65 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality glass, mounted on 6mm thick fixed to wall with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 66 | M&L for preparation of newly plastered walls surfaces and applying two coats of oil bound distemper over a coat over 1mm thick cement based wall care putty complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered walls surfaces and applying two coats of cement base paint over a coat over 1mm thick cement based wall care putty complete all as specified and directed. |
| 68 | M&L for preparation of newly plastered walls surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 69 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and directed. |
| 70 | M&L for cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in coping, benching and surface channel complete all as specified and directed. |
| 71 | M&L for cement concrete type B1, 1:2:4 ( using 20 mm graded aggregate ) as in cover slab (for manhole etc) complete all as specified and directed. |
| 72 | S&F reinforced concrete pipes class NP3 of 200mm dia laid and jointed complete with collarscomplete all as specified and directed. |
| 73 | Construction of Septic tanks, for 10 users,excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4,,RCC cover slab including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete as drawing No. TD-217, complete all as specified and directed. |
| 74 | Construction of Soak well size 1.8m dia and 4.50m deep, excavation in any type of soil, PCC in foundation 1:4:8 brick work in CM 1:6, walls of honey combed masonry, RCC cover slab, filled with brick bats complete as drawing No. TD-309, complete all as specified and directed. |
| 75 | M&L for point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLSH unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and includingnon metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular metal flush box or modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with modular white cover plate (Outer cover) with frame (inner) including 1.5 sqmm PVC insulated FRLSH unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:-(a) One light/fan/exhaust fan/bell point controlled by one modular switch/bell push. |
| 76 | All as per item No 75 above, but for one 3 pin modular socket outlet 5 Amp on the same board with other switch complete all as specified and directed. |
| 77 | All as per item No 75 above, but for one 3 pin modular socket outlet 5 Amp independent board complete all as specified and directed. |
| 78 | S&F modular switch, 1 way 6 Amp, 1 module complete all as specified and directed. |
| 79 | S&F modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed. |
| 80 | S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed. |
| 81 | S&F Lamp holder (Batten/Angle) PVC/ polycarbonate type with back plate for batten/angle fittings complete all as specified and directed. |
| 82 | S&F Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating,heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed. |
| 83 | S&F LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and directed. |
| 84 | S&F LED light fitting 1 x 10 Watts (T-8), Mirror type with high out put diffuser 2 feet long, 220 Volts, AC decorative type with driver holder and LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and directed. |
| 85 | S&F LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts complete all as specified and directed. |
| 86 | S&F heavy duty exhaust fan 300mm sweep, made of metal body complete with louvers shutter, 230V, 50 Hz, 1200 RPM copper winding including connecting up with three core flexible copper conductor for suitabl size and wall mounting fastener bolt, nuts & washers etc. complete all as specified and directed. |
| 87 | S&F sheet metal enclosures MCB SPN DBs 4 Way, 240 Volts, 50Hz, AC, double door (12) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 200 Amp copper bus bar for phase, complete with din rail, Neutral and Earthing bar, including connection, testing and making good the disturbed surfaces complete all as specified and directed. |
| 88 | S&F miniature circuit breaker (MCB), Single Pole & Neutral 40 to 63 Amp, rating 240V, 10 KA current carrying capacity, \"C\" curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 89 | S&F miniature circuit breaker (MCB), Single Pole 6 to 32 Amp, rating 240V, 10 KA current carrying capacity, \"C\" curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 90 | Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 6 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and directed. |
| 91 | M&L for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified and directed.Note :-Only compacted thickness of sand will be measured and paid separately. |
| 92 | Supply, laying un-reinforced precast concrete cable cover class LV type 1flat size 250mm x 150 mmx 40 mm complete all as specified and directed. |
| 93 | M&L for GI pipe ,light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface complete all as specified and directed. |
| 94 | M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed. |
| 95 | M&L for earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore lightgrade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 96 | Supply, laying, conecting and testing of ISI marked 50 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. |
| 97 | Supply, laying, conecting and testing of ISI marked 40 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. |
| 98 | Supply, laying, conecting and testing of ISI marked 25 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. |
| 99 | Supply, laying, conecting and testing of ISI marked 15 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. |
| 100 | S&F 15 mm bore Gun metal globe valve or gate valve with iron wheel head , screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. |
| 101 | S&F 25 mm bore Gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No Union for iron pipe heavy duty with ISI marked complete all as specified and directed. |
| 102 | S&F 50 mm bore Gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No Union for iron pipe heavy duty with ISI marked complete all as specified and directed. |
