|
| 1 | NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 50% of materials with him till the completion of item/date.2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay.3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station.4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. |
| 2 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge |
| 3 | M&L 25 mm thick PCC(1:2:4)type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed. |
| 4 | S&F 18/19 mm thickprelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 5 | M&L Double charged Vitrified Ceramic tiles of light shade 10 mm thick (square/ rect) polished, area of each tiles exc 0.36 sqm and n exc 0.42 Sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 6 | M&L Double charged Vitrified Ceramic tiles of light shade 10 mm thick (square/ rect) polished, area of each tiles exc 0.36 sqm and n exc 0.42 Sqm, in floors etc. with screed bed or bedding layer 10mm thick in CM 1:4 in Skritting and Dados in Vertical Surfacesset and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 7 | M&L Non skid ceramic tiles of 7 to 8 mm thick(square/ rect) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as directed. |
| 8 | M&L Non skid ceramic tiles of 7 to 8 mm thick(square/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match tiles all asdirected. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 10 | M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed. |
| 11 | M&L Glazed Ceramic tiles coloured, of size600mmX350mm/300mmX(7-9)mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles all as directed.Note: Mitred tiling to be done at external corners with a cut of 45 degree angle along the edge and the cost is included in rate quoted above. |
| 12 | M&L Glazed Ceramic tiles coloured, of size450mmX300mm/300mmX7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles all as specified and directed.Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above. |
| 13 | Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed. |
| 14 | M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 15 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situationcomplete all as specified and directed. |
| 16 | Demolition of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including frame work,cover fillets |
| 17 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanging from roof slab complete all as specified and as directed by Engineer- In- Charge |
| 18 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionscomplete all as directed. |
| 19 | M&L 2 coats ofOil bound distemper on a coat of primer on ceiling withwhite or tinted complete all as specified |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for struts, any size |
| 21 | S&F Steel work as in tubular / L post trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified. |
| 22 | M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified. |
| 23 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets/GI sheet in roof coverings complete all as specified and directed. |
| 24 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. |
| 25 | S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling all as specified and directed. |
| 26 | S&F Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified |
| 27 | M&L False ceiling of 8mm thick gypsum ceiling tiles with front PVC laminated & back Aluminium foil, Ceiling board of dimension 595X595mm with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre grid (Frame work of ceiling shall be measured and paid separately).Make:Diamond or Equivalent. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 29 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 30 | S&F Toughened glass door (Frame less) with 12mm toughened glass,swing type with 25mmx450mm H type handle both side with soft door closer system with all fittings which are necessary for installation complete all as specified and directed. |
| 31 | M&L Machine cut kota stone slab in stairs/ flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 32 | M&L Kota stone slab 20-25mm thick in skirting, dado and pillar laid over cement screed and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 33 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as directed. |
| 34 | M&L Rendering 10 mm thick in CM 1:3 oncelling surface, finished even and smooth with out using extra cementup to ht 6.5 m all as specified and directed. |
| 35 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed. |
| 36 | M&L Rendering 15 mm thick in CM 1:6 onbrick massonry surfaces of walls, finished even and smooth with out using extra cementall as specified and directed. |
| 37 | M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measuresincluding cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all asspecified & directed by the Engr-in-Charge. |
| 38 | M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of cement based paint over a coat of chalk whiting primer with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measuresincluding cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all asspecified & directed by the Engr-in-Charge. |
| 39 | M&L 3 coats of white wash over a coat of primer on newly plasteredsurfaces on ceilings complete all as specified and as directed. |
| 40 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed. |
| 41 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach complete all as specified and as directed |
| 42 | S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebatesincluding cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as directed by Engr-in-charge. |
| 43 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) complete all as specified. |
| 44 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2nos in each door, hinges, anodised aluminium snap beading screws etc.all as specified and directed. |
| 45 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm fixed with stainless steel wire staples as directed by the Engineer-in-Charge. |
| 46 | S&F 5.5 mm thick tinted glass of superior quality fixed to al partition and door each pan. |
| 47 | S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified. |
| 48 | S&F 5mm thick plain sheet glass nexc 0.5 Sqm each with glazing any size with rubber packing where ever required complete all as specified. |
| 49 | S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed. |
| 51 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge |
| 52 | Supply and fix 150 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 53 | Supply and fix 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 54 | Dismantling of existing PVC 500-1000 ltrs water tank complete all as directed. |
| 55 | S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanksall as specified and directed. |
| 56 | S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanksall as specified and directed. |
| 57 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 58 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 59 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 60 | All same as per item No.58 here in before but 20 mm bore. |
| 61 | All same as per item No.58 here in before but 25 mm bore. |
| 62 | S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and directed. |
| 63 | All as per item No.61 above but 20mm bore. |
| 64 | Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 65 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth |
| 66 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 900 mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed. |
| 67 | Taking down old plate rack and fixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified anddirected. |
| 68 | S&F Vitreous China wash hand basin whiteflat back, size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed. |
| 69 | S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. |
| 70 | S&F 650 x 450 mm bevelled edge mirror of selected quality glass mounted on PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washersin repairs complete all as directed by the Engr-in-Charge. |
| 71 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..andSeat and cover for pedestal pan withall as specified and directed. |
| 72 | S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests includingremoving the existing onecomplete and making good all connectionsas in repairs all as specified and directed. |
| 73 | Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long withbrass nuts and washers complete all as specified and directed. |
| 74 | S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and asdirected by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent |
| 75 | S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed.Make : Prayag/Parryware or equivalent |
| 76 | S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as directed.Make: Prayag Catpart No-6675 or quivalent in other make. |
| 77 | S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed. |
| 78 | S&F15 mm bore bib tapbrass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairsall as specified and directed. Make: Prayag/Parryware or equivalent. |
| 79 | S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.Make: Prayag/Parryware or equivalent. |
| 80 | S&F concealledstop valves 15 mmbore fancy type, chromium plated, with long shank and cup,screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. |
| 81 | S&F Chromium plated (CP)Toilet paper holder of vitreous china fixed to wallsbrass screws complete all as specified and directed |
| 82 | S&F Sheet glass shelf assembly for WHBconsisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 83 | S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed |
| 84 | S&F Towel ring for WHBconsisting chromium plated complete all as specified and directed |
| 85 | S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in all as specified and directed. |
| 86 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed |
| 87 | S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 88 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 89 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 90 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 91 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 92 | S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 93 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 94 | S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed. |
| 95 | S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed. |
| 96 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 97 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 98 | M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed. |
| 99 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick in sub floors and pavings etc. all as specified and directed. |
| 100 | Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed. |
| 101 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed. |
| 102 | Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 103 | M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as specified and directed by Engineer In charge. |
| 104 | Removing Demolished/excavated material exc. 1.5 m but n.exc 5km and depositing where directed |
| 105 | M&L for Preparing Old steel and iron surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and asdirected by the Engineer-in-Charge. |
| 106 | M&L Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 107 | S&F 5 mm thick Hallow pvc wall lining and solid pvc partations inclusive Aluminium freming or solvent cement and fixing at site all as Specified and directed by Engr In Charge. |
| 108 | Taking down shutters of any description not exc 1 sqm each and Refixing in same Opening complete all as specified anddirected. |
| 109 | All as per ser Item No 107 above but exc 1.0 Sqm and not exc 2 sqm each and Refixing at same opening complete all as specified anddirected |
| 110 | M&L for Heavy Duty Pavement tiles of size 400x400x12 mm/300x300x12 mm thick for out door spaces any colour/pattren of anti skid , anti bactiarial stain resitance and scratch resitant tiles(Endora tiles) and pointed in chemical laid over 15 mm thick screed bed or bedding layer in CM 1:6Complete all as specified and directed. |
