|
| 1 | Taking down unserviceable street lights/wall mounted lights/flood lights/Post top lanterns /Guarden lights and decorative out door type lights from 6 watt to 400 watts on any type of poles, high mast lights at any height/any places for servicing/overhauling/repair and maintenance and including providing damaged spare parts/burnt out accessories such as wires, surge protector, LED drivers, LED strip, MCBs, GI brackets, MS clamps, Timer switch, LED neon lamp, selector switches, Hole fastners etc as required for functioning items to be replaced as per site requirement is in under supply onlymaterials and complete all as specified and directed by Engr-in-Charge. (Note:- (i) New spare parts willbe measured and paid separately under \"Supply Only\" items.(ii) Streetlight repair work should beattendedwithin24 hrs as directed by Engr-in-Charge andCost should be included in quoted rate. (iii)Necessary T&P /tools/Transportation will be arranged by the contractor for technicians and costshould be included in quoted rate.(iv)Complaints of urgent nature which effects security lighting system to a particular area will be attended round the clock including Sunday and Holiday. (v) The contractor should give mobile number of concern person for attending repair workto JE/Engr -in-Charge.(vi)Spare parts shall be measured and paid under relevant items of this schedule. |
| 2 | Supply only 3.0 core, 1.5 sqmm PVC sheathed, flexible, multistranded copper conductor cable,1100Volts grade complete all as specified and directed. |
| 3 | Supply only MCB SP 6 to 32 Amps, 240Volts, 50Hz, 10 KA, \"C\"series complete all as specified and directed. |
| 4 | Supply only MCB SPN 40-63 Amps, 240Volts, 50Hz, 10 KA, \"C\"series complete all as specified and directed. |
| 5 | Supply only MCB TPN 40-100 Amps, 240Volts, 50Hz, 10 KA, \"C\"series complete all as specified and directed. |
| 6 | Supply only GI bracked 25 mm dia medium grade pipe of length 1.2 mtr and including bending and necessary shape as required at site complete all as specified and directed. |
| 7 | Supply only GI bracked 40 mm dia medium grade pipe of length 1.2 mtr and including bending and necessary shape as required at site complete all as specified and directed. |
| 8 | Supply only fabricated flat iron MS clamps 25X5mm & 30X6 mm as required and including necessary holes, nuts, bolt and washers etc andbending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed. |
| 9 | Supply only LED electronic driver of capacity 20 watt to 36 wattage, 240 Volts, 50 Hz suitable for wall mounted and post top lanterns as existing complete all as specified and directed. |
| 10 | Supply only LED electronic driver of capacity 40 watt to 60 wattage, 240 Volts, 50 Hz suitable for street lights as existing complete all as specified and directed. |
| 11 | Supply only LED electronic driver of capacity 70 watt to 90/100 wattage, 240 Volts, 50 Hz suitable for street/security lights as existing complete all as specified and directed. |
| 12 | Supply only LED electronic driver of capacity 120 watt to 150 wattage, 240 Volts, 50 Hz complete as existing complete all as specified and directed. |
| 13 | Supply only LED electronic driver of capacity 200 watt to 250 wattage,240 Volts,50 Hz complete as existing complete all as specified and directed. |
| 14 | Supply only LED electronic strip rating 60 watt to 90 watt, 240 Volts, 50 Hz suitable for Street lights and security lights as existing complete all as specified and directed. |
| 15 | Supply only LED electronic strip rating for 100 watt to 150 watt, 240 Volts, 50 Hz suitable for street light and flood lights as existing complete all as specified and directed. |
| 16 | Supply only LED electronic strip rating200 watt to 250 watt , 240 Volts, 50 Hz suitable for flood lights as existing complete all as specified and directed. |
| 17 | Supply only surge protect device suitablefor 60 watt LED light to 250 watt light fittings upto 4 -10 KV Surge protector, 240Volts, 50Hz as existing complete all as specified and directed. |
| 18 | Supply only Analogue time switch (Daily time switch) with suitable power contactor 32 Amps ML-2 type, 3Phase, 415 volts complete all as specified and directed. |
| 19 | Supply only connector suitable for street light timer panel 3 phase 415 volt for incoming and outgoing connection complete all as specified and directed(Note for Item No.2.00 to 19.00 :- Material of item No. 2.00 to 19.00 to be incorporated in Item No. 1.00 here-in-before) |
| 20 | M&L forrepair of Highmast light, servicing of 3 Phase motor, 3HP, 415Volts, 50Hz/ chain pully system, supporting wire/ cable for taking down/ out from existing position including providing same/suitable guage cable wire as existing requirement and complete electric connection, and testing and including PCC repair, complete overhauling and servicing all parts, re-windind of Motor as per requirement with necessary accessories/ spare parts replaced such as capacitor, connectors, Nylon fan blades, nuts, bolts and washers etc complete all as specified and directed. |
| 21 | Taking down of existing old unserviceable pole 7.5 to 9.5 metres long of any type from the PCC foundation, coping and including carefully taking down existingACSR conductor, cables, Street light, Security light fitting, GI brackets, looping box, stay assembly of any type & pattern etc after disconnection of electric supply by using necessary T&P/crane/ any mechanical method will be applied and debris disposal upto distance not exceeding 100 Mtr at defence land complete all as specified and directed. |
| 22 | M&L for steel tubular swaged type poles 9 metrs long, type 410 SP-31 pole weight approximately 154 kgs, pole should be in one piece only and smooth finishing, ISI marked complete with all accessories such as cast iron base plate, finial taper plug, bolts, nuts, screws, washers and drilling of holes for continious GI earth wire as specifiedtype 410 SP-32 including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer and embedded portion shall be painted with two coats of black paint after preparation of surfacecomplete all as specified and directed. |
| 23 | M&L forgalvanised cross arms, bracings, supports, clamps, angles etc and back plates fabricated in structural steel sections including nuts, bolts, washers, welding, bending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of paint and including taking down old unserviceable one complete all as specified and directed. |
| 24 | S&F ofthree phase cable junction box of size 250 x 200 x 160mm water & fire retardent proofout door type of approved , hinged/screwed type made of SMC plastic single door with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps, 240V, 10KA, \"C\" Seriesand including galvanised flat iron clamps of size 25X5mm thick-02 Nos GI nuts, bolts &washers etc for fixing on PCC/Steel tubular pole/ wall surface etc and including removing of old unserviceable item complete all as specified and directed. |
| 25 | M&L for PVC conduit heavy duty of size 20 mm diafrom looping box to Street light connector, holding inMS clamp of size 25X2 mm thickat every one mtr used in each pole 04 Nos of clamps with necessary nut, bolts and washers etc and including PVC sheathed three core multistranded copper conductor cable of size 1.5 sqmmfrom looping box to light fitting connector and including removing of old unserviceable item complete all as specified and directed. |
| 26 | M&L for earthing with glavanised steel earth plate electrode of size 600mmX600mmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nutsand washers of galvanisediron or steel using GI or steel wire 4mm dia as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposalof surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old earthing completeall as specified and directed.(Note: Galvanised iron wire of 4mm dia upto 7.5m long including testingis deemed to be included with quoted rate). |
| 27 | M&L for earthing with glavanised steel earth plate electrode of size 600mmX600mmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nutsand washers of galvanisediron or steel using GI or steel strip of size 25X4mm as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposalof surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old earthing completeall as specified and directed.(Note: Galvanised strip of size 25X4mm upto 7.5m long including testingis deemed to be included with quoted rate). |
| 28 | M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 25 Sqmm, 4.0 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testingincluding taking down of old cable of any description complete all as specified and directed. |
| 29 | M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 16 Sqmm, 4.0 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testingincluding taking down of old cable of any description complete all as specified and directed. |
| 30 | M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 10 Sqmm, 4.0 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testingincluding taking down of old cable of any description complete all as specified and directed. |
| 31 | S&F GI bracket pipe of size 40 mm dia medium grade of 1.5 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate galvanised flat iron clamps of 30X6 mm thick-02 Nos suitable for fixing any place of poles with nuts, bolts & washers including grouting on wall etc including taking down old unserviceable bracket complete all as specified and directed. |
| 32 | S&F ofLED security light fitting of capacity 70-75 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including dismantling of old unserviceable light fittings complete all as specified and directed.(Make:-SURYA Cat No. SLE UL 72W IP66 LXN/Havells Cat No.ENDURAPEARLPLUSSL70WLED757PASYTOPC/Bajaj Cat No.BRTFG75W LED I or equivalent model/Cat No of make as per Appx \"A\" as mentioned in PS here-in-after) |
| 33 | S&F 90 watt LED street light fittings, 230 V,IP-65/66 pressure die cast housing LED lamp aluminium compact high power LED street light with heat resistant toughened glass with LED lamp and necessary electric connection with suitable size copper cableafter and including taking down old unserviceable fittings complete all as specified and directed. (Make :- SURYA CAT NO-SLE UL 90W IP66LXN/ HAVELLS CAT NO. ENDURASUNDOWN SL 90W LED 765PASYBOTG/ PHILIPS CAT NO. BRPO62LED92CWSLCALSLPSU or equivalent model/Cat No of make as per Appx \"A\" as mentioned in PS here-in-after) |
| 34 | S&F 9 watts LED garden light Integral Decorative LED Bollard with IP65 protectionand providing suitable fixing arrangements such aslugs,glands,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed.(Make : Bajaj Cat Part No. BGBOS605 9W LED/SURYA Cat No. SLE BL 9W-BLK800 or equivalent model/Cat No of make as per Appx \"A\" as mentioned in PS here-in-after) |
| 35 | S&F 35/40 watts LED post top decorative lantern with LED lamp made in cast aluminium spigot housing with decorative opal polycarbonate diffuserand IP65 protectionwith suitable fixing arrangements such aslugs, glands, nuts,bolts and washersetc including necessary electric connection with suitable size copper wire after and including taken down of old unserviceable fittings complete all as specified and directed. (Make :- SURYA CAT NO-SLE PT 40W ETPP/ HAVELLS CAT NO. RUBYPT 40W LED 757PSYMTOPC/ CROMPTON CAT NO. LPTO 40CDL M or equivalent model/Cat No of make as per Appx \"A\" as mentioned in PS here-in-after) |
| 36 | M&L for boring holes horizontallyunder road without damaging the surface of road (minimum 0.6m bellow the road surfaces) with the help of GI tubing of any dia not exceeding 100mm dia for passing of UG cable complete all as specified and directed. |
| 37 | M&L for PCC (1:3:6) type C2 using (40 mm graded crushed stone aggregate) for making good cutting portion,mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed. |
| 38 | M&L for PCC (1:2:4) type B1 using (20 mm graded crushed stone aggregate) as in benching,coping of pole etc including necessary form work complete all as specified and directed.(Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor and cost deemed to be included with quoted rate.) |
| 39 | M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ductsin layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured) |
| 40 | Excavation in trenches for laying under ground cable, foundation and erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed. |
| 41 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed. |
| 42 | Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points as in soft/loose soil all as specified and directed. |
| 43 | M&L for brick covering with width equal to length of brick asprotection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x .75mm laid dry flat complete all as specified and directed. |
| 44 | Supply, installation, testing and commissinoningMS box suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz ,outdoor type, 800 x 800 x 400 cubicle, floor mounted, free standing, dust and vermin proof, air ventilationmade out of 3.15 mm thick CRCA sheet and suitable sizedangle iron and flat duly powder coated and any manufacturer shall befollowed CPRI norms and as approved by GE. Panel shall have front and rear opening, locking arrangement, cable alleys, bus bar chamber and switch gear compartment , hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coaded duly fixed onDMC/SMC insulators, housed in a separate bus bar chamber see through glass and control wiring with copper conductor cables of adequate size and length, incoming and outgoing MCCBs shall have extended bus bar links and civil work/PCC foundation as per site requirement and removing of old unserviceable item from existing location after disconnecting of existing cables complete all as specified and directed including comprising of following:-(a) MCCB 100 Amps, FP, 16 KA, 415 volts, 50Hz-01 No(b) MCCB 63Amps, FP, 16 KA, 415 volts, 50Hz-2 Nos(c) Analogue time switch(Daily time switch) with suitable power contactor 32 Amps ML-2 type, 3Phase, 415 volts, Auto/Manual operating switches -01No(d) Digital voltmeter,with VSS -01 set(e) Digital, Ammeter,with CTs & ASS-01 set(f)LED phase indication lamps RYB-01 set (g) Aluminium bus bar TPN 160 Amps rating -01 set(Note:- The contractor shall be submit the drawings (General & circuitlay out drawings ) for approval by theAccepting Officer/Engineer -in-chargebefore procurement) |
| 45 | Supply, errect, install Solar LED light fittings with Extruded Aluminium Housing corrosion proof, Solar panel (Mono Crystalline Solar PV module) 70 W , LED power 30 W, Lumen/Watt > 125, Solar Charge Controller - MPPT, Battery capacity - Maintenance free Lithium Ferro Phosphate battery 12.8V - 30Ah, BIS Approved Cells, Inbuilt BMS for Battery Safety & Enhanced battery life,Operating temperature -20 Degree to + 55 Degree, Designed for 2000 life cycle : > 5yrs life, Faster Charging,Maintenance free Backup for 2 days, PIR Motion Sensor for Automatic brightening & dimming,Lumen(LM)>3800lm, LED life time - 50000hrs, Viewing angle - 120°, Charging time - 1 day, Autonomy2 days, CCT(K) - 5700K, Mounting height5-6m, Working temp.-10-+55C, Dimension(mm)1320*382*55, Net weight 19 Kg, including earthwork, PCC foundation as per site requirement and removing of old unserviceable item from existing location after disconnecting of existing solar street lights with all accessories, cables complete all as specified and directed.(Make :- BAJAJ Cat No. BSZSL 30W All-in-one standard/SURYA Cat No. SSLE AIO30W D2 75WP 30 AH LFP W5 SOLAR or equivalent model/Cat No of make as per Appx \"A\" as mentioned in PS here-in-after) |
| 46 | M&L for galvanized iron tubing 80 mm dia (medium grade) in any length including including embedded in walltwo ends duly welded MS holdfast at two ends of GI pipe and providing PCC in wall and making good disturbed surfaces including taking down old unserviceable pipe complete all as specified and directed. |
| 47 | M&L for galvanized iron tubing 40 mm dia (medium grade) in any length including embedded in walltwo ends duly welded MS holdfast at two ends of GI pipe and providing PCC in wall and making good disturbed surfaces including taking down old unserviceable pipe complete all as specified and directed. |
| 48 | Dismantling of old unserviceable ACSR fromconductors from existing pole of any type including MS clamp, cross arms, nuts, bolts and washers at any heightcomplete all as specified and directed. |
