|
| 1 | Dimantling existing plaster including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter (200 feet).S.I.N.-706 |
| 2 | 12MM thick plaster with cement and cours sand 2.25 fm in 1:4 over smooth face b/w i/c supply of all materials, labours T&Petc. Required for completion of work. S.I.No- 584 |
| 3 | Two coat painting of roof or over brick work or where ever required with bitumen @0.85 kg per sqm in each coat including supply of all materials, labour and T&P etc. Required for proper completion of the work. CH-11, S.I.No. New Item 1 |
| 4 | Providing and laying \" Brick coba\" 12 mm thick laid with M 150 class brick bate coba 7.50 cm with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba and top of coba mortar mixed with water proofing compound in 1: 4 cement and coarse sand mortar finished smooth and top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shell be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight and including s/o all material, labour T&P etc complete for proper complition of work.CH-11, S.I.No. New Item 2 |
| 5 | Scraping old white colour wash including Disposal of Refuse with in aDisatance 60m i/c all work S.I.No. 708 |
| 6 | Providing of wall putty on Old surface with approved quality matterial of barjar, J.K./birla ect.make two coate i/c all material compleaction of work.Chap-15 S.I.N-12 |
| 7 | Finishing wall with one coat of water proof cement paint Weather coat of approved quality on previously old treated surface with this paint to give aneven shade including supply of all marerials, labour, Tools & plant etc.required for proper completion of the work. i/c supply of material, labour T&Petc. (S.I.N.-New Item 8+9) CH-15 |
| 8 | Painting two coat over priming coat on wood or steel and other metal surface with superior synthetic enamel paint of approved make brushing to givin an even surface and finished and i/c cleaning the surface i/c cost of material and scoured with wire brushes fine steel /wood scrappers sand papering i/c cost of all and i/c supply of all materials, labour T&P etc. required for proper completion of work. (chapter-15. New item-1+3+6) |
| 9 | S/F 8 mm thick china glazed ivory or light shades victryfide tiles 600x600MM size in flooring and skiting with (1:3) approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished. Ch-14, New item-5 |
| 10 | S/F 6 mm thick china glazed tiles on the wall 300x300 MM size with (1:3) approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished. S.I.N.-628 |
| 11 | Supply and fixing of anodized aluminum door having 2 mm thick aluminuym section excluding coating and an average coating of 20 micron fully glazed made of aluminum door tube size 83.5 x 44.65 m as vartical member and 1140 x 44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminum tublar vwrtical wibt two open able shutter,the rate will including cost of material fixtures 4 mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper cimpletion of the work.as per direction of Engineer in charge.with 5.00 mm thick plain glass complete.. S.I.N.-New Item No -15 CH-12 |
| 12 | Mild steel or iron work in heavy sizes such as trusses; builts up gates,door,frames,record racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel,bolts. CH-10, S.I.No. 503 |
| 13 | Wiring point for light with 1.0sq.mm FR PVC insulated single core multistoried copper conducctor cabil in heavy guage PVC conduit pipe complete with one nos. earth continuity wire and piano type switch ect. Complete in all respect .S.I.N.-131c+187A |
| 14 | As avobe item Nos. (1) but for Fan point. Complete.in all respect .S.I.N.-133C+187A |
| 15 | As avobe item Nos. (1) but for plug point. Complete.in all respect .S.I.N.-131C+187C |
| 16 | S/F of 15 Amp 250 V Power Plug S.I.No. -1139A |
| 17 | S/f of electronic modular fan regulator 120-280 Volts.S.I.Nos.-1203 © |
| 18 | S/F of 63 Amp four pole isolator S.I.No 1005 (B) |
| 19 | Suply and fixing of 6 Amp to 32 Amp S.P.N. M.C.B. on existing M.C.B.Box(10KA). S.I.N.-1002 |
| 20 | S.wirring of sub main with two nos 2.5sq mm FR PVC insulated 1100 V grade multistand singal core copper conductor cable in 20 mm dia heavy duty PVC condut with one nos 1.5 sq.mm. FR PVC insulated copper conductor cable as earth wire. S.I.Nos.-1304C |
| 21 | S/F of bottem / Angle holder. S.I.Nos.-405 |
| 22 | S/f of 1x22 watt LED Tube light fitting.SOR S.I.Nos.-1413 |
| 23 | Suply and fixing ms Box of 200x300x100 mm on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required.( E&M 2022 DSR No 1.22.14, Page no. 05) |
| 24 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (E&M 2022 DSR No. 19.1 Page No. 72) |
| 25 | Add GST 18% Please Enable Macros to View BoQ information |
