|
| 1 | Supply & Laying of CPVC PipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including pipe fittings and including taking up or down in the existing pipe line completeall as specified and as directed for pipe of 20mm outer dia. |
| 2 | All as per item No.1 above but for25mm outer dia bore |
| 3 | All as per item No.1 above but for 32 mm outer dia bore |
| 4 | Supply and Fix in repair looking mirror 600mm x 450mm bevelled edgeon selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specifiedand as directed. |
| 5 | S&F in repairs 15mm dia bib taps fancy type, chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specifiedand as directed. |
| 6 | S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specifiedand as directed. |
| 7 | S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specifiedand as directed. |
| 8 | S & Fin repairs Vitreous china wash down water closet (pedestalpattern ) white and fixed , closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified and directed. |
| 9 | S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed. |
| 10 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm includingcutting for and pinning in ends of brackets or erecting stand but excluding taps, wastes chain and plug and porcelain stopper but including bracketscomplete all as specified and as directed. |
| 11 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer\"s instruction complete all as specifiedand as directed |
| 12 | S&Fin repairs15mm bore PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specifiedand as directed. |
| 13 | S&F in repairs 15mm bore pillar taps fancy type,standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specifiedand as directed. |
| 14 | S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe(Minimum weight 15mm-90gms) complete all as specifiedand as directed. |
| 15 | S&Fin repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specifiedand as directed. |
| 16 | S&F in repairs angular stop cock 15 mm dia brass chromium plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for union of make that shall match with existing fitting i.e, jaquar complete all as specifiedand as directed. |
| 17 | S&Fin repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs, washers and wastes, including beading in cement mortar to dwarf of including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specifiedand as directed. Make : NIRALI/JAYNA/DIAMOND/ PARRYWARE |
| 18 | S&Fin repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 19 | S&Fin repairs PVC waste pipe for wash hand basin/ Urinal (size 31/32mm x 800mm length)of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 20 | S&Fin repairs PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length)of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 21 | S&Fin repairs ofBrass chromium plated 15mm wall mixer valve 2-in-1 for mixing hot and cold water including provision only forover head shower, fancy type of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 22 | S&F in repair 15mm dia two way bib cock with flange, chromium plated of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 23 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old onecomplete all as specified and as directed. |
| 24 | Supply and fix in repair CP towel rail 20 inch (500mm long) of make that shall match with existing fitting i.e, Prayag complete all as specifiedand as directed. |
| 25 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms) complete all as specified and as directed. |
| 26 | S&F in repairs 125mm Chromium plated shower roses with or without swivel joints,including fixing to steel pipe or union complete all as specified and as directed. |
| 27 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipescomplete all as specified and as directed. |
| 28 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipescomplete all as specified and as directed. |
| 29 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any descriptionand S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified and as directed. |
| 30 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any descriptionand S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified and as directed. |
| 31 | S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specifiedand as directed. (min. weight 20mm-210 gms) |
| 32 | S & F PVC (SWR) pipes 110mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor as in spouts etc complete including dismantling existing pipescomplete all as specified and as directed. |
| 33 | S & F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor complete as in spouts etc including dismantling existing pipescomplete all as specified and as directed. |
| 34 | S & F in repair PVC (SWR) bends with oval access door 110mm complete all as specified and as directed. |
| 35 | S & F in repair PVC (SWR) bends with oval access door75mm complete all as specified anddirected. |
| 36 | S & F in repairPVC (SWR) vent cowl 110mmcomplete all as specified anddirected. |
| 37 | S & F in repair PVC (SWR) junction single (single T ) equal or un equal withaccess door 75 mmcomplete all as specified anddirected. |
| 38 | S & F in repair PVC (SWR) junction single (single T ) equal or un equal withaccess door 110 mmcomplete all as specified anddirected. |
| 39 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 40 | M & L for 15 mm thick rendering in patches in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 41 | M & L for preparation of new wallsurfaces andapplying two coats of oil bound distemper over a coat of alkali resistant primer and complete all as specified and directed. |
| 42 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 43 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 44 | Taking down shutters of any description exc. 1sqm but not exceeding 2sqmeach including builders hardware complete all as specified and as directed. |
| 45 | Taking down shutters of any description n.exc. 1sqm each including builders hardware complete all as specified and as directed. |
| 46 | M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 47 | M&L for35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 48 | M&L for30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed. |
| 49 | M& L for 40 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and as directed. |
| 50 | S&Fin repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel framesfixed in repairs complete all as specified and as directed. |
| 51 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 52 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadscomplete all as specified and as directed. |
| 53 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 54 | S&F 12 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. |
| 55 | S&F 4.0mm thick, figured glass pin head type& glazing with oil putty in square n exc 0.5 sq.m in each pane fromAluminium section fixed with beads/glazing clips complete all as specified and as directed. |
| 56 | M&L for applying two coat of Synthetic enamel paint over a coat of pink primerforwooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. |
| 57 | M & L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, surfaces of any description , over 10cm width or girth not other wise describedcomplete all as specified and as directed. |
| 58 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed. |
| 59 | S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed. |
| 60 | S&F Butt hinges, 75mmsize medium weightcold rolled mild steel Etc., complete all as specified and as directed. |
| 61 | S&F Butt hinges, 100mmsize medium weightcold rolled mild steel Etc.,complete all as specified and as directed. |
| 62 | S&F Aluminium anodisedbarrel tower bolts of extrudedsection 100mm long complete all as specified and as directed. |
| 63 | S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and as directed. |
| 64 | S&F Aluminiumhandlescast typeanodised 100 mm size complete all as specified and as directed. |
| 65 | S&F Aluminiumhandlescast typeanodised 150 mm size complete all as specified and as directed. |
| 66 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed. |
| 67 | S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 68 | S&F in repairs Butt hinges, 75mmsize medium weightcold rolled mild steel Etc., complete all as specified and as directed. |
| 69 | S&F in repairs Butt hinges, 100mmsize medium weightcold rolled mild steel Etc., complete all as specified and as directed. |
| 70 | S&Fin repairs Aluminium anodisedbarrel tower bolts of extrudedsection 100mm long all as specified. |
| 71 | S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified. |
| 72 | S&F in repairs Aluminiumhandlescast typeanodised 100 mm size complete all as specified and as directed. |
| 73 | S&F in repairs Aluminiumhandlescast typeanodised 150 mm size complete all as specified and as directed. |
| 74 | S& F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 75 | S& F in repairs Mild steel sliding door bolts, 300mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 76 | S & F in repairsmild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate including welding complete all as specified and as directed. |
| 77 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed infloorcomplete all as specified and as directed. |
| 78 | S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed infloor complete all as specified and as directed. |
| 79 | S&F ANODISED aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glazing clips with one or more tracks including joining cleats fot fixing complete all as directed by Engr-in-Charge. |
| 80 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 81 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 82 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixingframe the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 83 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along withzinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealentover backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) |
| 84 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multichamberedframe, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) |
| 85 | S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width)using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters includingaluminium anodised snap beads, screws andfixed along with same sectionin three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc(The rate is inclusive of all fixings of builders hard ware such as wiremesh hinges, bow handles, locking arrangements etccomplete all as specified and as directed. |
| 86 | S & F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. |
| 87 | S & F in repairs 12 mm thick veneered decorative plywood, grade 1 (with BWR Resin) with decorative face veneers on one facefixed with screws to timber frame work complete all as specified and as directed. |
| 88 | M & L for 6mm thick external teak wood lipping over 18/19mm thick particle board/plywood fixed with nails complete all as specified and as directed. |
| 89 | S&F continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed. |
| 90 | S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed. |
| 91 | S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 150mm size complete all as specified and as directed. |
| 92 | M & L in repairs aluminium designer curtain rods (Draw berms rod) exteriorgrade 3 mm thick with holding clamps and fixed to wall PVC rawl plug and brass screwscomplete all as specified and as directed. |
| 93 | M & L for aluminium designer curtain rod bracketscomplete all as specified and as directed. |
| 94 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 95 | M&L 2nd class hard wood Plain fillets, square,rectangular or triangular in section, exc 6sqcm nexc 13sqcm clean sawn, secured with nails or brads complete all as specified and directed. |
| 96 | M&L for small articles such ashold fasts etc, of flat iron 25x3, grade confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 97 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc., complete all as specified and directed. |
| 98 | M&L for preparing wood and wood based materials, steel and iron work , new or old and treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n.exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed. |
| 99 | M & L for preparing and treating small articles such as hold fastswith coal tar black paint, area tarred not exc. 0.10 sqmcomplete all as specified and directed. |
| 100 | Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises complete all as specified and as directed. |
| 101 | M & L for non skid ceramic coloured joint free tile7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqmin floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 102 | M & L for non skid ceramic coloured joint free tile7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqmin floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 103 | M & L for non skid ceramic coloured joint free tile7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqmin skirting etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 104 | M&L for glazed coloured ceramic Concept designer tiles of7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE,fixed in vertical surfaces in Patches such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thickcomplete all as specified and as directed. |
| 105 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 106 | M & L for 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingsurface even and smooth without using extra cementcomplete as specified and directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and in every turning/ corners.) |
| 107 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 108 | M&L for fly ash old sizebrick workstraight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and as directed. |
| 109 | Demolition of Stone slabs and tiles of laid bedded and pointed in cement mortar or in any description or thickness in floors, platforms, aprons etc. complete all as specified and as directed. |
| 110 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 111 | Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed. |
| 112 | M&L PCC 1:4:8, Type D2 (using 40 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed |
| 113 | M/L sand filling under paver blocks including watering and consolidationcomplete all as specified and as directed. |
| 114 | M&L Machine pressed precast concrete interlocking paver block 60mmwith Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Gradecomplete all as specified and as directed. |
| 115 | Repairs to aluminium window (sliding and openable), ventilator of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, peg stay etc, and making the good to the original position complete all as specified and directed. |
