|
| 1 | a) Dismantling of floor of WC and Bath not exceeding 500mm deep, removing cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable method as per site condition, including grinding of sharp edges complete all as specified and directed.(b) Cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable technique as per site condition complete all as specified and directed.(c) M&L for providing a glass fibre reinforced acrylic modified cementitious coating system comprising base coat @ 1.50 Kg/Sqm, glass fibre reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc / MC Bauchemie India Pvt Ltd, applied to floor area and vertical surfaces thereof complete all as specified and directed.(d) M&L for 15mm thick protection plaster in cement mortar (1:3) mixed with integral waterproofing compound (IWPC) in accordance with manufacturer’s instructions complete all as specified and directed.(e) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (Paid separately under respective item).(f) M&L for filling sunken portion with PCC (1:5:10) type F2 (using 40mm graded stone aggregate) and finishing with 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggergate) complete all as specified and directed.Notes:(i) The work shall be executed only through authorised manufacturer’s applicator.(ii) Para (c) is applicable for both floor area and vertical surfaces of the same area.(iii) For payment, net floor area shall be measured.(iv) The cost of all operations specified above shall be deemed to be included in the quoted rates of the respective items and nothing extra shall be admissible on this account. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness belowor above ground level including floor finishes and removing debris from the site complete all as specified and as directed. |
| 3 | Dismantling glazed tiles/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specified and as directed. |
| 4 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 5 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramictiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 6 | M&L Vitrified cermaic tile 9 mm thick (square/ rectangular) polished area of each tiles n exc. 0.36 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 7 | M&L Vitrified cermaic tile 9 mm thick (square/ rectangular) polished area of each tiles n exc. 0.36 sqmset and jointed in vertical surface/ suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match over and including 10 mm thick rendering in cm (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 8 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 9 | M&L for non skid ceramic tiles 8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramictiles of size exceeding 0.18 sqm but not exceeding 0.38 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 10 | M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 11 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 12 | M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 13 | M&L for machine cut kota stone slab flooring 18-20 mmthick over cement screed base laid and jointed with greycement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 14 | M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed. |
| 15 | M&L 75 mm thick PCC 1:3:6 (using 40 mm graded stone aggregate) Type C2 as in plinth protection , PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed. |
| 16 | M&L for 75mm thick PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc complete all as specified and as directed |
| 17 | Providing, cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in roof kerbs, mud stops, rounded or chamfered on edges, leveling course in floor etc complete all as specified and as directed. |
| 18 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 19 | M&L for rendering 15 mm thick in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement)completed all as specified and as directed. |
| 20 | M&L for 15 mm thick rendering on brick wall surfaces in CM 1:4finished fair and even with WPC treatment complete all as specified and as directed.(Note:- WPC shall be measured separtly) |
| 21 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 22 | S&Fchicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and directed. |
| 23 | Supply only integral water proofing liquid ISI marked complete all as specified and as directed. |
| 24 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc.,(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 25 | S&F110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 26 | Ditto as item 25 but fixed in wall 110 mm complete all as specified and as directed. |
| 27 | S&F75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 28 | Dittoas item 27 but fixed in wall 75 mm complete all as specified and as directed. |
| 29 | S&F PVC SWR bends any radius 75mm dia with access door or without access door complete all as specified and as directed. |
| 30 | S&F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specified and as directed. |
| 31 | S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specified and as directed. |
| 32 | S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specified and as directed. |
| 33 | S&F PVC SWR vent cowl 110 mmn dia complete all as specified and as directed. |
| 34 | S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and as directed. |
| 35 | S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etccomplete all as specified and as directed. |
| 36 | S&F 75 mm PVC (SWR) couplers complete all as specified and as directed. |
| 37 | S&F 110 mmPVC (SWR) couplers complete all as specified and as directed. |
| 38 | S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed. |
| 39 | S&F 110mm PVC pipe \"P\" or \"S\" trap complete all as specified and as directed. |
| 40 | S&F 40mm bore steel water tubing medium grade galvanised insertedat the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specified and as directed. |
| 41 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 42 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 43 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 44 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 45 | S&F in repair W.C vitreous china,squatting pan orissa patern size 580x440mm white with intergral foot rest & P - orS trap,flush pipiecomplete excluding cistern complete all as specified and as directed. |
| 46 | S&F in repair W.C vitreous china,(pedestal patern ) white (excludingflushing cistern and flush pipes ) including seat cover fixing bolt& P - orS trap,flush pipie complete all asspecified.and directed |
| 47 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 48 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 49 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium platedfancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed |
| 50 | S&F in repair Brass chromium plated shower rose 125mm dial size with15 mm shower arm complete all as specified and directed |
| 51 | M&L75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed. |
| 52 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 53 | S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 54 | S&F in repair Vitreous China wash basin oval type whitesize 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipecomplete all as specified and directed. |
| 55 | S&F for 32mm PVCwaste pipe for flushing cistern complete all as specified and directed. |
| 56 | S&F in repairs bevelled edge mirror of selected quality glass, 6mm thick fixed withchromium plated brass screws and cup washers complete all as specified and as directed. |
| 57 | S&F25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 58 | S&F in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter flyscrewed both ends for iron pipr or union and fixed complete all as specified and directed. |
| 59 | S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixedcomplete all as specified and directed |
| 60 | S&F in repair Vitreous China bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl typewhite fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroungurinal back in cement complete all as specified and directed |
| 61 | S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 62 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and as directed. |
| 63 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 64 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 65 | S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed. |
| 66 | Disconnecting existing PVC tank exc 250 Ltrs and not exc 500 Ltrs setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc;) and hoisting and re-fixing in position complete all as specified and directed. |
| 67 | Disconnecting existing PVC tank exc 500 Ltrs and not exc 1000 Ltrs setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc;) and hoisting and re-fixing in position complete all as specified and directed. |
| 68 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed. |
| 69 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed. |
| 70 | S&F PVC cabinet with shelve of size 450x600mm including mirror fixed to wall with brass cleat with shutter complete all as specified and directed. |
| 71 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 72 | S&F in reapir 15 mm bore brass CP wall mixer for mixing hot & cold water with shower controlled (3 in 1 wall mixer) screwed down for iron pipe and fixed complete all as specified and directed |
| 73 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 74 | S&F in repair CP greating doom 100-125mm dia complete all as specified and as directed. |
| 75 | S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed. |
| 76 | Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint complete all as specified andas directed. |
| 77 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sand papering and M&L two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified andas directed. |
| 78 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfacescomplete all as specified andas directed. |
| 79 | Preparation of newplastered surfaces of ceiling etc. & applying three coats of limewhite wash on ceiling complete all as specified andas directed. |
| 80 | Taking down old U/S wooden /steel chowkhat with shutter size n. exc 1.50 sqm each and removing from site complete all as specified and as directed. |
| 81 | All as per item No 80 above but size exc 1.5 and n. exc 4 sqm complete all as specified and as directed. |
| 82 | Taking down shutters of any descriptionsize exc 1 sqm and n. exc 2 sqm each complete all as specified and as directed. |
| 83 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 84 | M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed |
| 85 | S&F 100 mm long(size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 86 | All as per item No. 85 above but 75 mm long complete all as specified and as directed. |
| 87 | S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded sectioncomplete all as specified and directed. |
| 88 | All as per item No. 87 above but 75 mm longcomplete all as specified and as directed. |
| 89 | S&F 300mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 90 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 91 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 92 | M&L for carrying out treatment for RCC Chajja’s, Ceilling, faciaetc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges.(iii) Hydro-demolition cutting / cleaning with high-pressure water jetting (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface (vi) Cleaningreinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface (vii) Providing and applying approved chemical rust remover with paint brush on corroded rebar and removing loose particles after 24 hours of its application and washed with sufficient quantity of water to make rebar free from corrosion (Dr. Fixit Rust Remover/equivalent),(viii)Surface preparation to remove all dust, dirt, loose rust scales etc., with wire brush, emery papers, rotary wire bristle brushes and grinding (if required) to the concrete surfaces to receive further repair treatment .(ix) Providing & fixing new reinforcement of various diameters as required at site in the form of mild steel and /or steel confirming to IS and lapping, welding, anchoring suitable to the old reinforcement including cutting, bending with all tools & tackles etc; (x) Providing and fixing GI weld mesh (1” x 1” x 12 gauge) with 30 cm lap at junction, one layer around the cross section of beams/ slaband along the span length. (xi) Providing and applying approved epoxy zinc rich anti-corrosive coating of 40 micron dry film thick/approved thickness of Dr. Fixit Zinc Rich Primer/ equivalent to the exposed reinforcing bars after application of rust remover, on the shear connectors/welded mesh/additional reinforcement of entire concrete repair surface. (xii) Dubbing out PMC 20mm thick (average thickness),(Polymer modified mortar/concrete) on uneven/ irregular surface such as walls / ceiling / chajjas etc. (using 12.5mm graded crushed stone aggregate) including 10mm thick PMM plaster in CM 1:3 ratio (Polymer modified mortar) on concrete surface (when concrete is green) ,(using Polymer modified 20% by weight of cement)complete all as specified and directed. |
| 93 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and as directed.. |
| 94 | Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified anddirected. |
| 95 | M&L for brick work with sub class \"B\" bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified anddirected. |
| 96 | Material and labour for brickwork with subclass \"B\" bricks, straight or curved on plan (exceeding 6m mean radius), using serviceable old bricks obtained from demolition, built in cement mortar 1:6, complete all as specified and directed. |
