|
| 1 | Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete all as specified and directed. |
| 2 | S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. |
| 3 | S&F for 12mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 4 | S&F forcontinous (piano) hinges,mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 5 | S&F formild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. |
| 6 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 7 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 8 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed. |
| 9 | S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. |
| 10 | Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified anddirected. |
| 11 | M&L for brick work with sub class \"B\" bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified anddirected. |
| 12 | Material and labour for brickwork with subclass \"B\" bricks, straight or curved on plan (exceeding 6m mean radius), using serviceable old bricks obtained from demolition, built in cement mortar 1:6, complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone wallsetc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified anddirected. |
| 14 | M&L for rendering 15 mm thick onother than fair faces of brick work or concrete surfaces in cement plaster 1:4complete all as specified and directed. |
| 15 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6,finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 16 | M&L applying two coats of cement base paintovera coat of primer including preparation of newly plastered surface of walls complete all as specified and as directed. |
| 17 | Material and labour for applying two coats of oil-bound distemper (white or tinted) on newly plastered surfaces, over a coat of chalk whiting, and including 1mm thick wall care putty, complete all as specified and directed.\" |
| 18 | S&F in repair PVC hollow wall lining interlocking type 5 mm thick plain/Design of approved coloured, fitted into the wall with PVC rawal plugs and steel screws including fillets on joints as per manufacturers instruction complete all as specified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.) |
| 19 | Taking down Chowkats or frames size not exceeding 1.5 Sq.m each with shutters (Without taking off shutters from the frames)complete all as specified and directed. |
| 20 | Taking down Chowkats or frames size exceeding 1.5 Sq.m but not exceeding 4 Sq.m each with shutters (Without taking off shutters from the frame)complete all as specified and directed. |
| 21 | Taking down Shutters of any description size n. exc 1 sqm eachcomplete all as specified and as directed. |
| 22 | Taking down shutters of any descriptionsize exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. |
| 23 | S&F pressed steel frame of size 105mmx60mm for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate,etc complete all as specified and directed |
| 24 | S&F pressed steel frame of size 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed |
| 25 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed. |
| 26 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 27 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 28 | S&F band, straps, supports or stay for rainwater, ventilating pipes, including bolts if required hookes (stay) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlin to wood trusses or rafters knee piece inserts two way and three way straps plate wahers and similar small articles confirming to Fe 290 Gde 165complete all as specified and directed. |
| 29 | S&F for factory made 35 mm 2nd class Hard Wood, plain framed panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face s. The size of rail & site as per IS 1003 ( Part-I) kiln seasoned and chemically pressured treatedcomplete all as specified and directed. |
| 30 | S&Ffor 35 mm thick glazed and skeleton shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed. |
| 31 | S&F for 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass, etc.; sizes of members of shutters as specified inSSR part-I, Section 8 Clause 8.24 (b) complete all as specified and directed. |
| 32 | S&F Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 33 | S&F Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded making a good complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 34 | S&F 150 mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 35 | S&F 100 mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 36 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 37 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 38 | Supply and fix mild steel butt hinges, 100mm long, medium weight, made from cold rolled mild steel, complete all as specified and directed. |
| 39 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 40 | S&F in repair butt hinges 75 mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 41 | S&F in repair butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 42 | S&F mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutter 300 mm long complete all as specified and directed. |
| 43 | S&F inrepairs extruded aluminum alloy handles 100 mm size fabricated type anodized complete all as specified and as directed. |
| 44 | S&F inrepairs 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 45 | S&F in repairs 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 46 | Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 47 | S&F in repair mild steel 150 mm helical door spring hinges with steel wire spring, stove enamelled black complete all as specified and as directed |
| 48 | S&F in repairCurtain rail stainless steel decorative type 20-25 mm diaincluding fixing bracket and end knobs complete all as specified and directed. |
| 49 | Dismantling structural steelwork of any description andin any positionincluding doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 50 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Gde E-165) complete all as specified and as directed. |
| 51 | Supply and fixing galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 52 | S&F in repair galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 53 | Hackingoutoldbrokenglass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 54 | S&F 3mm thick Sheet Glass ordinary qulity and glazing with oil putty or wooden beads in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 55 | S&F figured glass, pin head type 3mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 56 | M&L for repair Aluminum door of any type &any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper etc)Complete all as specified and directed.Note : Glass & Particle board etc shall be paid separately. |
| 57 | M&L for repair Aluminum window of any type &any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc)Complete all as specified and directed. Note : Glass & wire mesh etc shall be paid separately. |
| 58 | S&F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked),suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 59 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 60 | S&F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 61 | S&F anodised powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles 2 Nos in each door, hinges, 200mm long aluminium tower bolts, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 62 | S&F anodised powder coated aluminium windows, ventillators shutters, fixed type / slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing,anodised aluminium snap beading screws, locking latches etc complete all as specified and directed. |
| 63 | S&F anodised powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hingestype B-21 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 64 | S&F 4.8 mm thick sheet or tinted glassof selected qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed |
| 65 | S&F 4.8 mm thick sheet or tinted glassof selected qualityin squareexceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed |
| 66 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed. |
| 67 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. |
| 68 | M&L for prepration new or previously untreated surfaces of wood or wood based surfaces and applying two coats of synthetic enamel paintover a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and as directed. |
| 69 | M&L for applying two coats of synthetic enamel paint on new or previously un-treated steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide primer complete all as specified and as directed. |
| 70 | M&L 1:3:6 type C2 (using 40mm graded stone aggergate) Cement concrete as in back filling in chowkhat and mass concrete complete all as specified and as directed. |
| 71 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and directed.. |
