Tender For Supplying Installation Testing And Commissioning Of Power Distribution Panel For Generator Roomelectrical Machine Lab In Electrical Engineering Dept At Vnit Campus Nagpur, Nagpur-Maharashtra
TDR : 52963261
Tender Notice
BOQ
20 Days Left
Nagpur
Maharashtra
Tender For Supplying Installation Testing And Commissioning Of Power Distribution Panel For Generator Roomelectrical Machine Lab In Electrical Engineering Dept At Vnit Campus Nagpur
Name of Work: Supply, installation, testing and commissioning ofPower Distribution Panel for Generator Room-Electrical Machine Lab in Electrical Engineering Dept. atV.N.I.T. Campus, Nagpur
Sl. No.
Item Description
1
Supply, installation, testing and commissioning ofPower Distribution Panel for Generator Room-Electrical Machine Lab in Electrical Engineering Dept. atV.N.I.T. Campus, Nagpur
2
\"Supply, installation, testing and commissioning of160 Amp Power Distribution Panel. Incomer- 160 A FP, 415 Volt MCCB, RYB indicator, Ammeter (Digital), Voltmeter (Digital), Multifunction meter, ELR+CBCT, 6A SP control MCB. Outgoing- 100A FP MCCB-04 nos, 63A FP MCCB-12 nos, 63A FP MCB-04 nos, 40A FP MCB-04 nos, 25A 2P MCB-08 nos. Separate ammeter with selector switch & 6A SP control MCB should available with all outgoing circuits. Termination of existing outgoing cables to be done at the time of commissioning of the panel. All electrical accessories provided in panel must be as per VNIt make list. Any additional requirement for commissioning the panel will be in the scope of bidder. Note: Electrical Panel Drawing/ Circuit Diagram must be approved by Associate Dean (Electrical Works)
3
Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable, 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
4
Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
5
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPEfor enclosing cable below ground/road surface, complete.
6
Dismantling of old existing panels inside the panel room and one 3Ph relay unit outside of the panel room.
7
Supply, installing, and testing of maintenance free earthing comprising ofelectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF
8
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
