|
| 1 | Earth work in exvation by mechnical means (Hydrulic excavater)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottams, lift upto 1.5 m , including getting out the excavated soil and disposel of surplus excavated soil as directed within a leasd of 50m. all kind of soil. |
| 2 | Providing and laying in poisition cement concrete of specified grade excluding the cost of centring and shuttring . All works up to the plinth level 1:5:10 ( 1 cement :5 fine sand derived from natural sources:10 graded stone aggregrate40 mm nominal size derived from natural sources) |
| 3 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 infoundation and plint in : Cement mortar 1:6 (1 cement: 6 |
| 4 | Brick work with common burnt clay F.P.S.(non modular)bricks of class designation 7.5 in superstructure above plinthlevel up to floor V level in all shapes and sizes in :Cement mortar 1.6 (1 cement :6 coarse sand) |
| 5 | 12 mm Cement plaster of mix.1.6(1 cement : 6 fine sand) |
| 6 | 62 mm thick cement concrete flooring with concrete hardener topping layer 50 mm thick cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)and top layer 12 mm thick cement hardener consisting of mix:1:2(1 cement hardener mix : 2graded stone aggregate, 6mm nominal size)by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications.40 mm thick with 20 mm nominal size stone aggregate. |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc, including cutting ,hoistingfixing in position and applying a priming coat of approved steel.Hot finished welded type tubes. |
| 8 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpetwashers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal /vertical or curved surfaces) excluding the cost of purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275 gm/m2 |
| 9 | 35 mm thick factory made solid panel PVC ;Door shutter, made fo single piece extruded solid PVC profiles, 5 mm (+0.2 mm )tick, having styles & rails (except lock rail) of size 95 mmx5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side),having one side thickness of 15 mm integrally extracted on the hinge side of the profile for better side), having one side thickness of 15 mm integrally extracted on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x20mmx1mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement , self driven self tapping screws & MS rectangular pipes bracket of size 190 mm x100 mm of cross section size 35 mm Non decorative finish (matt finish) |
| 10 | Providing and fixing ISI marked aluminium butt hinges anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required color or shade with necessary. 125x75x4 mm |
| 11 | Providing and fixing aluminium handles, ISI hinges anodized(anodic coating not less than grade AC 10 as per IS :1868 )transparent or dyed to required colour or shade, with100 mm |
| 12 | Providing and fixing aluminium tower bolts , ISI marked, anodized (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade, with necessary screws etc complete.200x10 mm |
| 13 | Providing and fixing aluminium sliding door bolts, , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868)transparent or dyed to required colour or shade, with nut and screws etc complete.250x16mm |
| 14 | Providing and fixing CP. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 15 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia pipes. |
| 16 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia pipes. |
| 17 | Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. |
| 18 | Providing and placing on terrace (at all floor levels)polyethylene water storage tan , IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 19 | Proving and fixing PTMT grating of approved quality and colour .Circular type 100 mm nominal dia |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P .flush bend with fittings & C.I brackets , 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof culling of approved municipal design complete , including painting of fitting and brackets, cutting and making good W.C. pan with ISI marked white solid plastic seat and lid |
| 21 | Providing and fixing plasticized PVC connection pipe with brass unions. 45 mm length15 mm nominal bore |
| 22 | Providing and fixing CPVC pipes, having including all jointing of pipes & fitting with one step CPVC solvent cement and thecost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 110 mm PVC pipe. |
