|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mAll kinds of soil. |
| 2 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 4 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 7 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge15 mm to 40 mm nominal bore |
| 8 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diamete |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to f loor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 15 | 15 mm cement plaster on rough side of single or half brick wall of mix1:4 (1 cement: 4 coarse sand |
| 16 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to bespecified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge |
| 19 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red orequivalent |
| 20 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :20 mm dia nominal bore |
| 21 | Providing and fixing soil, waste andvent pipes 75 mm diameter : Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 22 | Providing and fixing soil, waste and vent pipes100mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 23 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes |
| 24 | 75 mm dia pipe |
| 25 | 100 mm dia pipe |
| 26 | Providing and fixing plain bend of required degree.100 mm dia Sand cast iron S&S as per IS - 1729 |
| 27 | Providing and fixing plain bend of required degree.75mm dia Sand cast iron S&S as per IS - 1729 |
| 28 | Providing and fixing collar :100 mm Sand cast iron S&S as per IS - 1729 |
| 29 | Providing and fixing collar :75 mm Sand cast iron S&S as per IS - 1729 |
| 30 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100mm dia |
| 31 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 75mm dia |
| 32 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with f ire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 33 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of f ittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 35 | Providing and fixing first quality white vitreous china, Oval overcounter Wash Basin ofHindware(10045)/ Kohler (K-2075IN) with M.S. or CI brackets,32mm dia C.P. brass Bottle Trap, CP waste and other ancillary fittings including painting of fitting. |
| 36 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 37 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 38 | Providing and fixing C.P. brass two way bib cock of make Jaquar ,plumber,Kohler conforming to IS:8931 : 15 mm nominal bore |
| 39 | Providing and fixing in position basin Mixer - (Chrome) make Plumber,Kohler,Jaquar etc |
| 40 | Providing and fixing toilet paper holderC.P. brass heavy quilty |
| 41 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 42 | Providing & fixing in position approved quality CP brass Wall mixer, 15 mm nominal dia. with IS mark and / approved make of following type including providing & fixing wall flanges and fixing to concealed / exposed water supply pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints for leakage all as per specifications and as directed by EIC.Wall mixer with provision of over head Shower with 115 mm long bend pipe & wall flange similar to \"CONTINENTAL\" of\"JAQUAR\" cat. No. 273 |
| 43 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 44 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 45 | a) C.P brass Shower single flow with revolving wall joint with shower arm 190 mm long light body with wall flange of \"CONTINENTAL Series \"of \"JAQUAR\" cat. No.491 & 477 |
| 46 | Providing and fixing in position 15 mm dia 600 mm long C,P inlet Connection pipe with sutable hexa nut and washar on both end |
| 47 | Providing & Fixing of C.P. hand spray (health faucet) of ESS/ Jaquar/ Kohler with push button control and flexible hose connection with C.P. holder for hand spray complete in all respects. |
| 48 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outletSand cast iron S&S as per IS - 3989 |
| 49 | Providing and fixing in positionVentilator wair mesh with teek wood frame of 40mmx40mm including wooden primar,nails complet job work |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 51 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface havingOC content less than 50 grams/litre |
| 52 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 53 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 54 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 55 | Providing and fixing in position Stainless Steel grade SS202 Robe Hook with3 Pin |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 57 | Providing and fixing in position Stainless Steel grade SS202l Handle 125mm |
| 58 | Providing and fixing in position Stainless Steel grade SS202 Tower bolt 150mm |
| 59 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and sizewith 6 mm thick hard board backing |
| 60 | Providing and fixing in position 40mm dia PVC drainpipe, working pressure 6kg/sqcm, wall thickness not less then 5.mmincluding jointing with existing with cutting and jointing the pipe withPVC solvent ,including testing the joints complete as per direction of Engineer in charge. make Astrial, Suprim, Finolex |
| 61 | Providing chemical based water proofing of M/s Indofil chemicals / New coat of Dr. Fixit as approved over bath / WC brick bat coba & other locations as per the following procedure:a) Applying a coat of Indofil MC-76 mixed with clean water in 1:4 ratio i.e., one part of MC-76 and four parts of clean water over the entire area to be treated including filling of cracks, if any with CM-1:3 (Using factory made Ready Mix Mortar only) with waterproofing compound.b) Applying a coat of cement bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement. c) Providing and spreading of polycon based fibrous waterproofing net for entire area of Toilet/Bath including lapping as per manufacturer\"s specifications immediately after applying bond coat and curing. d) Applying one more bond coat with MC-76 mixed with cement in1:1 ratio i.e., 1 part of MC-76 and 1 part of cement over the polycon based net.e) Applying two coats of flex top coats with indofil flexcoat mixed with 85 parts indofil flex coat and 15 parts clean water or applying two coats of Dr.fixit New coat without dilution. Notes:(i) The entire work shall be carried out a per manufacturer\"s specification and as directed by the Engineer In Charge. ii)The contractor shall furnish guarantee bond on appropriate stamp paper in the proforma as per Appendix \"D\" for the entire waterproofing treatment for maintaining the surroundings and under side surfaces of the waterproofing treatment in bone dry condition for 5 years. During the guarantee period the contractor shall attend all leakages, defects etc. if noticed, free of cost, starting the work of checking up and rectification within a week\"s time from the date of intimation about such leakages / defects. |
| 62 | Accessories/Fittings for TOILET FOR PWDtoilets |
| 63 | Providing and fixing white vitreous china extended wall mounting water closet of size 570x360 mm of approved shape including all accessories , seat covercomplet work including all |
| 64 | Providing & fixing 40mm round brass Flush valve make Jaquare ,Plumber, Kholarand required accessories. |
| 65 | Providing and fixing in position Handicapwith Floor Support 25 mm dia Stainless Steel grade SS202 U Shaped Grab Bar, For Bathrooms |
| 66 | Providing and fixing in position Handicap 25 mm dia 30Cm long Stainless Steel grade SS202 Bathroom Grab Bar Safety Handle Rack . |
| 67 | Providing and fixing in positionKohler retractable shower seat crafted with high-quality insulated stainless steel. Measuring 298mm x 202mm x 35mm, it can support a substantial 150 kg load. Equipped with Kohler\"s Safe Shield Technology, this part offers exceptional safety and reliability. Its premium-grade ABS construction ensures long-lasting performance and durability. |
| 68 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm |
| 69 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 70 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 71 | 100mm dia |
| 72 | 75 mm dia |
| 73 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
