|
| 1 | Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting,placing everypart in-tact , as applicable as per drawing.B) Work will be executed where the furniture exist in different User Units of AGE(I) Ayodhya including Furniture Yard as directed by Engineer-in-Charge |
| 2 | Table Office Officer Steel, Drawing No - FD-84/ 1003 |
| 3 | S&F in replacement, Legs, as per drawing |
| 4 | S&F in replacement, Lock of drawer with duplicate Key as per drawing(Make-GODREJ/HETTICH/LINK) |
| 5 | M&L for Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Charge. |
| 6 | S&F in replacement, Stiffeners as per drawing |
| 7 | PVC Shoes std quality all as per drawing |
| 8 | M&L for Welding in repairs to joints of tabble office offecer steel as per drawing and as directed by Engr-in-Chrege. |
| 9 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing. |
| 10 | Table Office Clerk Steel, Drawing No - FD-84 / 381 / 1004 |
| 11 | S&F in replacement, Legs, as per drawing |
| 12 | S&F in replacement,Lock of drawer as per drawing with duplicate key as per drawing (Make-GODREJ/HETTICH/LINK) |
| 13 | M &L for repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 14 | S&F in replacement,Stiffeners as per drawing |
| 15 | S&F in replacement,PVC Shoes std quality all as per drawing |
| 16 | M&L for Welding the joints of legs / square tube as per drawing & directed by Engr-in-Chg. |
| 17 | S&F in replacement, Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing. |
| 18 | Almirah Large Steel with shelves or 1/2 H 1/2S, Drawing No FD-351 / 1031/1033/TP/MAP |
| 19 | S&F in replacement, Brass/Steel 6 lever locks with duplicate Key (Make-Godrej/Link/Hettich) as per drawing |
| 20 | S&F in replacement, Chronium Plated Handle 130mm long as per drawing |
| 21 | S&F in replacement, Legs made out of 1mm thick MS sheet duly painted with one coat of Red oxide primer as per drawing |
| 22 | M&L for repairs to door as specified including replacement of hinges & as directed by Engr-in-Chg. |
| 23 | M&L for repair/adjustment to existing shelf including welding as per drawing |
| 24 | S&F in replacement, Shutter/door as per drawing. |
| 25 | S&F in replacement, Locking device complete including rod |
| 26 | S&F in replacement, S&F Shelf as per drawing |
| 27 | S&F in replacement, CP Conduit pipe as per drawing |
| 28 | Almirah Medium/Small W/Shelf and 1/2H x 1/2 S (Steel) Drawing No (FD-1032/1034/350/104(M) |
| 29 | S&F in replacement, Brass/Steel 6 lever locks with duplicate Key(Make-Godrej/Link) as per drawing |
| 30 | S&F in replacement, Chronium Plated Handle 130mm long as per drawing |
| 31 | S&F in replacement, Legs made out of 1mm thick MS sheet duly painted with one coat of Red oxide primer as per drawing |
| 32 | Repairs to door as specified including replacement of hinges |
| 33 | M&L for Repair/adjustment to existing shelf including welding as per drawing |
| 34 | S&F in replacement, Locking device complete including rod |
| 35 | S&F in replacement, Shutter/door as per drawing. |
| 36 | S&F in replacement, Shelf as per drawing |
| 37 | S&F in replacement, CP Conduit pipe as per drawing |
| 38 | Teapoy Verandah, Drawing No - FD-383/255 & FD/E6/MAP/17 |
| 39 | S&F in replacement, Rubber/PVC shoe std quality as per drawing |
| 40 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing. |
| 41 | Flat iron/conduit section complete aasembled set to be provided as per drawing. |
| 42 | Table 3x2 with and w/o drawer& Table 3\"x3\", Drawing No - FD-1008/1007/1009 |
| 43 | M&L for Welding wherever required asdirected by Engr-in-Incharge |
| 44 | Top 18 mm thick of size 3\"x2\" made of MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing. |
| 45 | Top 18 mm thick of size 3\"x3\" made of MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing. |
| 46 | M&L for Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 47 | S&F in replacement, Rubber shoe std qualityas per drawing |
| 48 | S&F in replacement, Lock of drawer with duplicate Key as per drawing (Make-GODREJ/HETTICH/LINK) |
| 49 | Chair Steel Tubular witharms, Drawing No - FD-75(M) |
| 50 | S&F in replacement, Second class Hard wood seat frame including cane worktwo coats enameled painting over a coat primer and putty fitting in position by welding plate below theseat along with nut and bolt all as per drawing |
| 51 | S&F in replacement, Second class Hard wood back frame including cane worktwo coats enameled painting over a coat primer and putty fitting in position all as per drawing |
| 52 | S&F in replacement, PVC Arm rest as directed by EIC |
| 53 | S&F in replacement, Rubber cap for conduit pipe as per drawing |
| 54 | M&L for Welding wherever requiredas directed by Engr-in-Incharge |
| 55 | Chair Steel Tubular withoutarms, Drawing No - FD-75(M) |
| 56 | S&F in replacement, Second class Hard wood seat frame including cane worktwo coats enameled painting over a coat primer and putty fitting in position by welding plate below theseat along with nut and bolt all as per drawing |
| 57 | S&F in replacement, Second class Hard wood back frame including cane worktwo coats enameled painting over a coat primer and putty fitting in position all as per drawing |
| 58 | S&F in replacement, Rubber cap for conduit pipe as per drawing |
| 59 | M&L for Welding wherever requiredas directed by Engr-in-Incharge |
| 60 | S&F in replacement, Hard rubber shoe std quality as per drawing |
| 61 | Chair Verandah, Drawing No - FD/E6/MAP/11, FD/MAP-II/06,FD-359,256 |
| 62 | S&F in replacement, any member of chair chair using MS conduit pipe 16G, 19mm dia as per drawing & directed by Engr-in-Charge |
| 63 | M&L for Welding joints of leg of 19/20mm MS tube & other jointsas per drawing as directed by EIC |
| 64 | S&F in replacement, Hard rubber shoes as per drawing |
| 65 | Removing old unserviceable pvc framefrom chair verandah map and S &Fnew seating and back frame of chair verandah map asspecified and directed by by EIC |
| 66 | Removing old unserviceable cane from chair verandah & recaning the chairsetc with approved new plastic cane4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC) |
| 67 | Locker Steel, Drawing No - FD-1029/257/SKD-562 |
| 68 | S&F in replacement, Chronium Plated Handle 130mm long as per drawing |
| 69 | S&F in replacement, S/S Hasp & Staple ,restas per drawing |
| 70 | Repairs to door/sidesincluding replacement of hinges welding joints complete all as shown on drawing. |
| 71 | S&F in replacement, Shutter/door as per drawing. |
| 72 | S&F in replacement, Legs made out of 1mm thick MS sheet duly painted with one coat of Red oxide primer as per drawing |
| 73 | S&F in replacement,CP Conduit pipe as per drawing |
| 74 | S&F in replacement, Shelf as per drawing. |
| 75 | S&F in replacement, Brass/Steel 6 lever locks with duplicate Key (Make-Godrej/Link/hettich) as per drawing |
| 76 | BottomDrawer complete as per drawing. |
| 77 | S&F in replacement, Complete Locking device complete including rod and other device |
| 78 | Charpoy IP Ply Top, Drawing No - FD/MAP-II/01 |
| 79 | S&F in replacement,12 mm thickplywood top BWP grade(Make-Century ply/Greenply/Archidply) as per existingshape and size with 8 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drawing and as directed |
| 80 | S&F in replacement, Hard rubber shoe std quality as per drawing |
| 81 | M&L Welding work wherever required as directed by EIC |
| 82 | Table Computer , Drawing No (FD/E6/MAP/03) |
| 83 | Removing of existing unserviceable table top for Table computer and S&F new table top of size 900 X 600 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed table frame with suitablescrews wood/steel with cup washer and 18x4 mm thick teak wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge. |
| 84 | Removing of existing unserviceable Key Board tray from Table computer and S&F new Key Board tray of size 450 mm X 480 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 85 | Removing of existing unserviceable Mouse tray from Table computer and S&F new Mouse tray of size 380 mm X 200 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 86 | Removing of existing unserviceable damaged drawer from Table computer and S&F new drawer of size 380 mm X 200 mm 75 mm deep made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 87 | Removing the existing unserviceable Telescopic channel from Table computer and S & F in repairs Telescopic Channel of suitable size for Key board tray/Mouse tray/Drawer of table computer and re-fixing the existing Key board tray/Mouse tray/Drawer with new telescopic channel all as specified on drawing or as directed by Engineer-in-charge. |
| 88 | Removing of existing unserviceable Upper/Bottom shelf from Table computer and S&F new Upper/Bottom shelf of size 450 mm X 300 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the frame of Table computer with suitablescrews wood/steel with cup washer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 89 | M&L for Welding of broken existing Square MS pipe of Table computer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge. |
| 90 | S & F in repairs Nylon buffers of legs for table computer rest all as shown on drg and as directed by Engr-in-Charge. |
| 91 | Charpoy IP folding, Drawing No - FD-388(R ) |
| 92 | S&F in replacement,12 mm thickplywood top BWP grade(Make-Century ply/Greenply/Archidply) as per existingshape and size with 10 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drawing and as directed |
| 93 | S&F in replacement, Hard rubber shoe std quality as per drawing |
| 94 | M&L for Welding work wherever required as directed by EIC |
| 95 | Table Dinning OR A/Top, Drawing No - FD-165(M) |
| 96 | S&F in replacement, Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly fixed with 1mm stainless steel to be fixed as table top all as specified and directed by EIC. |
| 97 | S&F in replacement, Leg/Stiffner/short rail of MS 25mm square tube of 1.6mm thickcomplete all as specified and directed by EIC. |
| 98 | S&F in replacement, Long Rail/middle supportcomplete all as specified and shown on drawing and as directed directed by EIC. |
| 99 | M&L for Weldingin repairs to joints of table dining steel frames as per drawing and wherever requiredas directed by E-in-Incharge |
| 100 | CHAIR STEEL PADDED WITH ARM (TP), Drawing No - TP |
| 101 | Taking out old u/s Seat of Chair Steel Padded with arm and S&F new Seat of size 450 mm x 450 mm,made of 12mm thick hot pressed plywood and mouled polyurethene foam40 Density with PVC lipping all round complete all as shown on drawing.made out of 9mm ply wood at bottom and cushion with cover, complete all as shown on drawing as specified & directed by Engr-in- Charge. |
| 102 | Same as 16.01 but but for back of chair steel padded with arm |
| 103 | Taking out old fabric from back and seat of the chair and S&F newfabric polyproplene /acrelic (range offabrics not less than Rs 400/ Rm) Note : this work is apart from Ser No 16.01 and 16.02 |
| 104 | Taking out old u/s Padded arm hand rest of Chair Steel Padded with arm hand rest and S&F new Padded arm of size as specified, complete all as shown on drawing as specified & directed by Engr-in- Charge. |
| 105 | M&L Gas Welding/welding of joints of Mild Steel Pipe and flat iron frame complete and supply the damaged part all as shown on drawing as specified & directed by Engr-in- Charge. |
| 106 | TABLE CENTRE BRASS LEG WITH GLASS, Drawing No - FD-375 |
| 107 | Taking out old broken/unserviceable glass top of size 1200mm long and 600mm wide and S&F new Glass top for Table Centre Brass leg with glass shall be of 10mm thick plate tined glass (white colour) with corner rounded as shown on drawing. & directed by Engr-in- Charge. |
| 108 | Taking out old broken leg (complete Set including entire frame) S&F new brassleg (complete Set including entire frame) & directed by Engr-in- Charge. |
| 109 | Taking out old broken/unserviceable Vaccum rubber shoes and S&F new Vaccum rubber shoes as shown on drawing. |
| 110 | Chair School with hand Board, drawing No - FD/E6/MAP/05 or similar FD drawing |
| 111 | S&F in replacement, hand board of MDF Board as per drawing after removing the old one. complete all as shown on drawing and directed by EIC |
| 112 | S&F in replacement, Seat (As per sample held in furniture Yard) as per drawing after removing the old one.complete all as shown on drawing and directed by EIC |
| 113 | M&L for Gas Welding/welding of joints of Mild Steel Pipe and flat iron frame complete and supply the damaged part all as shown on drawing as specified & directed by Engr-in- Charge. |
| 114 | CHAIR COMPUTER (FD-E6/MAP/01):- |
| 115 | Taking out old unserviceable back of computer chair and S&F new 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed wtith contour tumber support for extra comfort wtih PVC lipping all around, size & shape as per drawing complete all as specified and directed by Engr-in-Charge |
| 116 | -ditto- all as in item No 31 but seat of Chair Computer |
| 117 | Taking out old unserviceable hand rest of computer chair and S&F new hand rest black intgral skin polyurethane reinforced with MS insert it shall be scratch and weather resistant size & shape as per drawing complete all as specified and directed by Engr-in-Charge |
| 118 | Taking out old unserviceable pedestal assy of injection moulded in black 30% glass filled nylon . A 10.5mm dia fired brught bright zinc plated. MS castor pin is of pressfitted into each prong for holding the castors. It is 600 mm pitch-centre dia (complete with wheel). size & shape as per drawing complete all as specified and directed by Engr-in-Charge. Note:- (a) Synchro Tilting :- Adjustable tiling mechanism to be designed with forward tilt, self regulating tilt tension+manual override, 4 position tilt lock, Anti-shock back machanism to prevent backrest rom hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement.(b) Gas Lift:- Maintenance free environmental friendly, chrome free cylinder tube shall be fixed in a M S black powder coated outer central column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300 N force should under go an impact test. |
| 119 | Stool Revolving Steel Adjustable (FD-1026). |
| 120 | Taking out old unserviceable 30mm dia soft wooden sheet from existing Stool Revolving Steel Adjustable and S&F new 30mm dia soft wooden sheet size: 30mm thick, 380mm dia complete all as specified & directed by Engr-in-Charge. |
| 121 | Taking out old unserviceable 32 density foam from existing Stool Revolving Steel Adjustable and S&F new 32 density foam complete all as specified & directed by Engr-in-Charge. |
| 122 | Taking out old unserviceable Rexene cover from existing Stool Revolving Steel Adjustable and S&F new Rexene cover of best quality foam complete all as specified & directed by Engr-in-Charge. |
| 123 | Taking out old unserviceable hard rubber/PVC toes from bottom of legs of existing Stool Revolving Steel Adjustable and S&F new hard rubber/PVC toes for bottom of legs of existing Stool Revolving Steel Adjustable complete all as specified & directed by Engr-in-Charge. |
| 124 | M & L two coat of black/suitable coloursynthetic enamelled paintto old/new surface of Stool Revolving Steel Adjustable complete all as shown on drawing as specified & directed by EIC. |
| 125 | Table Bed Side Steel, Drawing No : FD/E6/MAP/15 (R) |
| 126 | M&L for Replacement of handles of drawer as per sample as per drg. |
| 127 | M&L for replacedment sides(Three sides) 18 mm thick particle board exterior grade (action Tesa/Archidply/Century/Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE (I) complete rest all as per drg. |
| 128 | M&L for replacedment Top 18 mm thick particle board exterior grade (action Tesa/Archidply/Century/ Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/AGE (I) with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on three sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.& directed by Engr-in- Charge. |
| 129 | M&L for replacedment Drawers18 mm thick particle board exterior grade (action Tesa/Archidply/Century/ Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete and bottom shall be made of 9 mm thick prelaminated particle ext with std quality channel ( make-Ebco/Hettich/Ozone)rest all as per drg. & directed by Engr-in- Charge. |
| 130 | S&F in replacement,PVC rubber shoes std quality |
| 131 | M&L for Welding wherever required asdirected by E-in-Incharge |
| 132 | Charpoy GI Pipe Ply Top :-General Condition for Repair ofCharpoy GI Pipe(A) Removal of existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items shall be done carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components shall be fixed properly including tightening the joints, screwing, weldging, glueing, providing hinges,denting,placing every part in-tact , as applicable as per drgs.B) The Work Shall be executed where the furniture exist in different User Units of AGE (I) Ayodhya including BS\"s Furniture Yard as directed by Engineer-in-Charge |
| 133 | S&F in replacement, 12 mm thickplywood top BWP grade(Make-Century ply/Greenply/Archidply) with beading all around as per existingshape and size with 10 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete all as shown on drg and directed by Engr-in-charge. |
| 134 | S&F in replacemet of long rail of 32 mm dia Medium grade GI pipes (ISI Marked) as in long rail complete all as shown on drg and directed by Engr in- charge. Make of pipe Jindal/Prakash/TATA. |
| 135 | S&F Replacement of unserviceable short rail of charpoy GI pipe 32mm bore but \"except pipe\" including cutting threading complete all as shown on drg and directed by Engr -in-charge.Note : Old GI Pipe retrived in replacement of long rail vide item No 1.02 shall be reused to convert in short rail. |
| 136 | S&F in replacement of unservicable legs of charpoy GI pipe 32mm dia but \"except pipe\" including cutting of size, threading etc as required with bottom plug made of Sal woodcomplete all as shown on drg and and directed by Engr-in-charge. Note : Old GI Pipe retrived in replacement of short/long rail vide item No 1.02 /1.03 shall be reused to convert in leg. |
| 137 | S&F in replacement, 32 mm dia GI 3 way elbow complete all as shown on drg and directed by Engr-in-charge. |
| 138 | S&F in replacement, 32mm size check nutscomplete all as shown on drg and directed by Engr-in-charge. |
| 139 | M&L for Welding work in repair (Not exc 2.5 cm in length and 6mm in thickness) wherever required complete all as shown on drg and directed by Engr-in-charge. |
| 140 | M&L for painting two coat of synthetic enamel paintwithshade as approved by EIC over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally, applying putty to level the surface before primer/painting (Make-Asian/Berger/Nerolac/Shalinmar), all as specified and shown on drawings and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of AGE(I) Ayodhya including Furniture Yard as directed by Engineer-in-Charge |
| 141 | Table office officer steel, Drawing No - FD-84/ 1003 |
| 142 | Table Office Clk steel, Drawing No - FD-84 / 381 / 1004 |
| 143 | Almirah Steel Large, Drawing No FD-351 / 1031/1033/TP/MAP |
| 144 | Almirah Steel Medium/Small, Drawing No - FD-1032/1034/350/104(M) |
| 145 | Teapoy Varandah, Drawing No - FD-383/255 & FD/E6/MAP/17 |
| 146 | Table 3x2 with and w/o drawer & Table 3\"x3\", Drawing No - FD-1008/1007/1009 |
| 147 | Chair Steel Tubular withand w/o arms, Drawing No - FD-75(M) |
| 148 | Chair Verandah, Drawing No - FD/E6/MAP/11, FD/MAP-II/06,FD-359,256 |
| 149 | Locker Steel,Drawing No - FD-1029/257/SKD-562 |
| 150 | Charpoy IP Hard Top, Drawing No - FD/MAP-II/01 |
| 151 | Charpoy IP folding, Drawing No -FD-388 (R) |
| 152 | Table dinning OR A/Top, Drawing No -FD-165(M) |
| 153 | Chair Steel Padded with arm, Drawing No - TP |
| 154 | Chair School with hand Board, drawing No - FD/E6/MAP/05 or similar FD drawing |
| 155 | Rack Shoe Steel (FD/E6/MAP/02) |
| 156 | Rack steel any type/Book Shelf open large, drawing No - FD-1038 & 1023/69 |
| 157 | Table Bed Side Steel : FD/E6/MAP/15 (R) |
| 158 | Table Cmputer (FD/E6/MAP/03) |
