|
| 1 | Recruit Locker Bed side steel size of 560mm x 600mm x1500mm for HP Coy (Built-in)Removing ofunserviceable curtain rod and S & F with curtain rod with bracket of size & shape as per existing nuts, bolts of suitable sizecomplete all as specified and as directed . |
| 2 | Removal of UNSV legs and S&F withnew legs made out of 1mm thick PBI sheet of size & shape as per existing with proper welding complete all as specified and as directed . |
| 3 | Removal ofunsv locking device from locker bed side steel and S&F chromium plated heavy duty hasp & stapple size of 100mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 4 | Removal of unsv handle from locker bed side steel and S&F chromium plated D type handle heavy duty size of 150mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 5 | S&Fnew drawer of size 560 x 300mm with handle including both side rail for locker bed side steel made out of 1mm thick PBI sheet ofsize & shape as per existing completeduly painted with one coat of synthetic enamel paint over a coat of Red oxide primer complete all as specified and as directed . |
| 6 | Removal ofunsv drawers from locker bed side steel and re fixing the same after repair by proper functioning includighandle & side rail for drawer complete all as specified and as directed . |
| 7 | Removal of unserviceable shelf of Locker bed side steel and replacing the same with new shelf made out of 1mm thick MS sheet made to shape as per existing duly applied one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed . |
| 8 | Removal of unserviceable singleshutter (door) and replacing the same with new shutter made out of 1mm thick MS sheet made to shape as per drawing of size 560mm x 1500mm duly applied one coat of synthetic enamel paint over a coat of red oxide primer. |
| 9 | Removing of unserviceable peg set of three and replacing thesame with new peg set of three to shape and size as per exiting complete all as specified and as directed . |
| 10 | Removal of unserviceable writing board with bracketmade out of pre laminated particle boardand replacing the same with new writing boardmade out of 18/19 mm thick prelaminated particle board (Exterior garde)size of700x600x18mm approved make and shade duly providing 4mm thickhalf round TW edging shall be treated with french polish high gloss best quality complete all as specified and as directed . |
| 11 | Supply & Fix 02 x L shape Iron angle bracket for each Writing board (size : 25mm Angle with 5mm thick & complete length of each L angle is 3 feet) duly applied one coat of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed . |
| 12 | M&L preparation of existing steel surfaces of internal and external surfaces including shelves by removing all dents filling with putty & spray painting with machine one coat of synthetic enamel paint (internal & extrenal)all asper specified as directed by Engr-in-charge.Note:Cost of minor repair like welding to locker if required,nuts, bolts, washers, screws & hinges etc shall deemed to be included in the quoted rates. |
| 13 | Rect Locker Bed side steel Size of 560mm x 600mm x 1500mm for ST Coy (Built-in) Removing of unserviceable legs and S & F with new CP curtain rod with bracket of size & shape as per existing nuts, bolts of suitable sizecomplete all as specified and as directed . |
| 14 | Removal of UNSV legs and S&F withnew legs made out of 1mm thick PBI sheet of size & shape as per existing with proper welding complete all as specified and as directed . |
| 15 | Removal ofunsv locking device from locker bed side steel and S&F chromium plated heavy duty hasp & stapple size of 100mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 16 | Removal of unsv handle from locker bed side steel and S&F chromium plated D type handle heavy duty size of 150mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 17 | S&Fnew drawer of size 560 x 300mm with handle including both side rail for locker bed side steel made out of 1mm thick PBI sheet ofsize & shape as per existing completeduly painted with one coat of synthetic enamel paint over a coat of Red oxide primer complete all as specified and as directed . |
| 18 | Removal ofunsv drawers from locker bed side steel and re fixing the same after repair by proper functioning includighandle & side rail for drawer complete all as specified and as directed . |
| 19 | Removal of unserviceable shelf of Locker bed side steel and replacing the same with new shelf made out of 1mm thick MS sheet made to shape as per existing duly applied one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed . |
| 20 | Removal of unserviceable singleshutter (door) and replacing the same with new shutter made out of 1mm thick MS sheet made to shape as per drawing of size 560mm x 1500mm duly applied one coat of synthetic enamel paint over a coat of red oxide primer. |
| 21 | Removing of unserviceable peg set of three and replacing thesame with new peg set of three to shape and size as per exiting complete all as specified and as directed . |
| 22 | Removal of unserviceable writing board with bracketmade out of pre laminated particle boardand replacing the same with new writing boardmade out of 18/19 mm thick prelaminated particle board (Exterior garde)size of700x600x18mm approved make and shade duly providing 4mm thickhalf round TW edging shall be treated with french polish high gloss best quality complete all as specified and as directed . |
| 23 | Supply & Fix 02 x L shape Iron angle bracket for each Writing board (size : 25mm Angle with 5mm thick & complete length of each L angle is 3 feet) duly applied one coat of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed . |
| 24 | M&L for preparation of existing steel surfaces of internal and external surfaces including shelves by removing all dents filling with putty & spray painting with machine one coat of synthetic enamel paint (internal & extrenal) andall asper specified as directed by Engr-in-charge.Note:Cost of minor repair like welding to locker if required,nuts, bolts, washers, screws & hinges etc shall deemed to be included in the quoted rates. |
| 25 | Recruit Locker Bed side steel size of 560mm x 600mm x2050 mm with shoe rack cabinet for JHCoy (Built-in)Removing ofunserviceable curtain rod and S & F with curtain rod with bracket of size & shape as per existing nuts, bolts of suitable sizecomplete all as specified and as directed . |
| 26 | Removal ofunsv locking device from locker bed side steel and S&F chromium plated heavy duty hasp & stapple size of 100mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 27 | Removal of unsv handle from locker bed side steel and S&F chromium plated D type handle heavy duty size of 150mm long for locker bed side steel fixing with screw complete all as specified and as directed . |
| 28 | Removal of unserviceable singleshutter (door) and replacing the same with new shutter made out of 1mm thick MS sheet made to shape as per drawing of size 560mm x 1500mm duly applied one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .. |
| 29 | Removal ofunsv shoe rack cabinetdoor (shutter) size of 480x300mm locker bed side steel and re fixing the same after repair by proper functioning incl Hinges complete all as specified and as directed . |
| 30 | S&F New shoe rack cabinetdoor (shutter) size of 480x300mm locker bed side steel and re fixing the same after repair by proper functioning incl Hingesall as specified and as directed . |
| 31 | Removal of unserviceable writing board with bracketmade out of pre laminated particle boardand replacing the same with new writing boardmade out of 18/19 mm thick prelaminated particle board (Exterior garde)size of700x600x18mm approved make and shade duly providing 4mm thickhalf round TW edging shall be treated with french polish high gloss best quality complete all as specified and as directed . |
| 32 | Supply & Fix 02 x L shape Iron angle bracket for each Writing board (size : 25mm Angle with 5mm thick & complete length of each L angle is 3 feet) duly applied one coat of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed . |
| 33 | Removal of unserviceable shelf of Locker bed side steel and replacing the same with new shelf made out of 1mm thick MS sheet made to shape as per existing duly applied one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed . |
| 34 | Removing of unserviceable peg set of three (SS)and replacing thesame with new peg set of three to shape and size as per exiting complete all as specified and as directed . |
| 35 | M&L for preparation of existing steel surfaces of internal and external surfaces including shelves by removing all dents filling with putty & spray painting with machine one coat of synthetic enamel paint (internal & extrenal) and all asper specified as directed by Engr-in-charge.Note:Cost of minor repair like welding to locker if required,nuts, bolts, washers, screws & hinges etc shall deemed to be included in the quoted rates. |
| 36 | Rect Locker Bed side steel Size of 560mm x 600mm x 2050mm with Shoe rack cabinetfor Adm Bn(Built-in)M&L for preparation of existing steel surfaces of internal and external surfaces including shelves by removing all dents filling with putty & spray painting with machine one coat of synthetic enamel paint (internal & extrenal) andall asper specified as directed by Engr-in-charge.Note:Cost of minor repair like welding to locker if required,nuts, bolts, washers, screws & hinges etc shall deemed to be included in the quoted rates. |
