Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc;overall thicknessand removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer incharge. |
| 2 | M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer\"s instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed. |
| 3 | Supply only integral water proofing liquid ISI marked Make: Pidiproof LW |
| 4 | M&L for cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified. |
| 5 | S&F 40mm bore steel water tubing medium grade galvanised insertedat the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specifide. |
| 6 | Dismantling cast iron work of any description and in any position complete all as specified. |
| 7 | S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified. |
| 8 | S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified. |
| 9 | S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified. |
| 10 | S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified. |
| 11 | Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified. |
| 12 | Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified. |
| 13 | Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified. |
| 14 | Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified. |
| 15 | S&F 100mm bore pipe cast iron \"P\" or \"S\" trap, complete all as specified. |
| 16 | S&F 75mm bore pipe cast iron \"P\" or \"S\" trap, complete all as specified. |
| 17 | S&F 100mm bore pipe cast iron cowls, complete all as specified. |
| 18 | S&F 75mm bore pipe cast iron cowls, complete all as specified. |
| 19 | Fixing only in repair 100mm bore pipe cast iron or any type cowls, complete all as specified. |
| 20 | Fixing only in repair 75mm bore pipe cast iron or any type cowls, complete all as specified. |
| 21 | M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, \"Y\" junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified. |
| 22 | M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified. |
| 23 | M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified. |
| 24 | S & F for Pipe Supporting Clamping - Single Pipe of dia 110 mm (4\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted \"C\" Channel with ribs to be used of size 250 mm (10\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4\") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\") - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEJZ/TD/102.Make: Shaivi or equivalent as approved by GE. |
| 25 | All as item No 24 but75 mm dai (3\") down take pipe complete all as specified. |
| 26 | Taking down eaves Guttersrain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 27 | S&F in repair PVC SWR bend/shoe of PVC 110mm dia suitable for 110 mm bore / dia PVC SWR rain water pipes complete all as specified and as directed. |
| 28 | S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls incl stack clamps of 50mm x 3 mm flat iron with bolts & nuts. |
| 29 | S&F PVC (SWR) 110mm borepipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors all as specified and directed |
| 30 | S&F PVC (SWR)75mm borepipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors complete all as specified. |
| 31 | M&L PVC SWR floor trap, with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 100 mm dia complete all as specified. |
| 32 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement |
| 33 | S&F PVC (SWR) bend 110mm dia radius complete all as specified. |
| 34 | S&F PVC (SWR) bend 75mm dia radius complete all as specified. |
| 35 | S&F PVC (SWR) 100mm junction double, (double T), equal or unequal |
| 36 | S&F PVC (SWR) 75mm junction double, (double T), equal or unequal |
| 37 | S&F PVC Connection 15 x450mm size with PTMT Nuts at both ends with rubber washers complete all as specified. |
| 38 | M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 39 | M&L for Exposing existing RCC members such as columns, slabs, lintels, beams, etc. up to the main reinforcement carefully by means of Chisel & hammer, hard wire brushes or any other mechanical means, so as to remove all loose concrete and cleaning the surface to remove all dust particles, etc. and make the surface ready for chemical treatment in bone dry condition. |
| 40 | M&L for 30 mm thick guniting in patches on to the required area on RCC/PCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor/kp-100 OR equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dustover treated surface ready to receive grouts including 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. so as to do guniting in plant, removing the debris out of MOD land inlow lying areasand leveling as directed, incl two coat of white wash over one coat of primer complete all as directed by Engr-in-charge. |
| 41 | All as per item No. 40.00 here-in-above, but thickness is 50 mm, NoteFOR ITEM NO. 40 & 41:-(i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water andalloy to dry.To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions.(ii) When polymix coating is in tackey condition guniting is done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction.Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer.(iii)Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 42 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness belowor above ground level including floor finishes and removing debris from the site all as specified and as directed. |
| 43 | M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges coping etc; complete all as specified and as directed. |
| 44 | Preparing of old surfaces of APP modified polymeric membrane roof, remove all corrosion products brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of painted surfaces and M&L for applyingtwo protective coats of bituminous aluminium based reflective paint to safeguard against UV, all as directed by Engr-in-charge. (Note:- second coat apply after 24 Hrs or as per manufacturing instructions). |
| 45 | Dismantling Stone slabs and tiles of any description or thickness laid bedded and pointed in cement mortar in floors, aprons etc. |
| 46 | Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide. |
| 47 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 48 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 49 | M&L for virified ceramic double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 50 | M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, as in skirting (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 51 | M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 52 | M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with greycement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 53 | M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:6 and jointed complete all as specified and as directed. |
| 54 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified. |
| 55 | Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work,serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed. |
| 56 | M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 57 | -ditto- all asper above item but, except stone complete all as specified and as directed. |
| 58 | Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed. |
| 59 | DB2K Specification applied as following stages-(i) Surface Preparation :- Surface preparation to be done by Mechanical means such as grinding, chasing open the construction joints , Small cracks, Corner joints , bug holes should be opened up, cleaned and filled with Powder Based Repair Mortar.(ii) Bore Packing: All the borehole gaps between concrete surface,stone masonary pointing/joints and all conduit pvc pipe of various dia upto the neck level shall be filled with dual-shrinkage compensated free flow grout - SmartCare GP Grout or approved equivalent The periphery of the PVC pipe should be sealed with SC Hybrid PU Sealant. (iii) Application of Bond coat- SBR based Repair Polymer.Waterproofing Coating: Application of two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Dampblock 2K or equivalent with a consumption of 1.5 Kg/Sqm in 2 coats. Cure the coating for another 3-4 days, Water pond taste etc as per manufacturers specifications as under-The coating shall be CFTRI Certified.Elongation >80±15% per ASTM D 2370Hydrostatic pressure resistance - Positive side 5 Bar as per EN12390-8:2019. Crack bridging upto 1±0.3 mm as per EN 1062. |
| 60 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 61 | M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed. |
| 62 | M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4finished fair and even all as specified and as directed. |
| 63 | M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 64 | M&L for dubbing out average 20mm thick in cement plaster 1:4 on uneven/ irregular surface such as walls / ceilling / chajjas etc. complete all as specified. |
| 65 | S&F low carbon annealed wire in hexagonal shape 1.0mm diametre chicken wire mesh of size 25mm (distance between the faces of the hexagon), durable twisted woven mesh for mounting on curved and angled surfaces including 15cm lap at junctionfixed with nails and properly stapled complete all as specified and as directed. |
| 66 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm butnot exc 4.00 sqm each and removing from site or to store as directed by Engineer incharge. |
| 67 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) notexc 1.5 sqm each and removing from site or to store as directed by Engineer incharge. |
| 68 | Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each andremoving from site complete as directed by Engineer in charge. |
| 69 | Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting complete as directed by Engineer in charge. |
| 70 | S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed. |
| 71 | M&L 40mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both side complete all as specified. |
| 72 | S&F of factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified. |
| 73 | S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 74 | S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 75 | S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F. Make : Rajshree Doors or equivalent as approved by GE. |
| 76 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE. |
| 77 | M&L for fabrication ofaluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch \"A\". |
| 78 | S&F for figured glass, pin head type ordinaryquality, 4mm thick, area of each pane not exceeding0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed. |
| 79 | S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 80 | S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed. |
| 81 | S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified. |
| 82 | S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified. |
| 83 | S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed. |
| 84 | S&F of 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified. |
| 85 | S&F of 300mm rat tail rod-shaped helical door spring made of mild steel with a roller and roller plate attached to the iron frame by welding complete all as specified & as directed by Engineer-in-charge |
| 86 | Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified. |
| 87 | S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge. |
| 88 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide. |
| 89 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide. |
| 90 | Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide. |
| 91 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 92 | S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 93 | S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 94 | Fixing only 15mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 95 | Fixing only 20mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 96 | Fixing only 25mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide. |
| 97 | S&F in repair vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified. |
| 98 | S&F in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified. |
| 99 | S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified. |
| 100 | Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified. |
| 101 | S&F in repair stainless steel sink, 1.00mm thick for kitchen, with plug, waste pipe, washers, including bedding in cement mortar on to dwarf walls, or including fixingcantilever ironbrackets,connectingunionetc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm complete all as specified and directed. |
| 102 | S&F in repair tubular towel rail 20mm dia brass chromium plated `D\" type 60cm long with bracket and fixed complete all as directed. |
| 103 | Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc;) and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 104 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified. |
| 105 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified. |
| 106 | S&F in repair 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. |
| 107 | S&F in repair pillar tap, brass, 15mm dia, with capston heads, chromium plated,fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed. |
| 108 | S&F in repair 15mm bore stop valve/ angle stop cock chromium plated,fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified. |
| 109 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 110 | S&F in repair CP greating doom 100-125mm dia complete all as specified. |
| 111 | S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed. |
| 112 | M&Lfor removingany type of Grass/plants/bushes (girth n.exc 15cm of trunk of any of plants 100mm) grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surfaceand pouring acid not less than 100ml for each plant in the roof to avoid further growth and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using waterproofing compound as per manufacturer\"s instruction and making the patch finished with painting as per surroundings complete all as specified and as directed. (Note:- Rate quoted is deemed to be included for scaffolding, saftey, measured required for working on or upto height of 20 m vertical slopes.) |
| 113 | Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint after priming with Red oxide/ Zinc Chrome complete all as specified andas directed. |
| 114 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified andas directed. |
| 115 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfacescomplete all as specified andas directed. |
| 116 | Preparation of newplastered surfaces of ceiling etc. & applying three coats of limewhite wash on ceiling complete all as specified andas directed. |
| 117 | Preparing oldsurfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 118 | Preparing oldplastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of distempered or painted surfaces and M&L for applying onecoat of distemper oil emulsion on old plastered/ unplastered surfaces of walls complete all as specified and directed by Engr-in-Charge. |
| 119 | Preparation of old decorated plastered/ unplastered surfaces of ceilingetc. & applying one coats of limewhite wash on ceilingcomplete all as specified. |
| 120 | Preparation of old decorated plastered/ unplastered surfaces of walls etc. & applying one coat of cement base paint complete all as specified. |
| 121 | Preparing oldsurfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint complete all as specified andas directed by Engineer incharge. |
| 122 | M&L for carrying out repair dammagedRCC projections,chajja facia, roof projection facia, etc in the following stages -(i) Demolition of existings dammaged RCC projection,chajja facia, roof projection facia, Staircase and similar suspended work and (reinforcement cut as required to facilitate demolition).(ii) Preparation of existing demolised portion by scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with low carbon annealed wire in hexagonal shape 1.0mm diametre chicken wire mesh of size 25mm complete.(iii) Applying 1stcoat rendering of 10mm thickin CM (1:3)over demolished concrete facia/projection surfaces and allow to dry 6-8 Hrs and cured with gunny jute bag. (iv)Applying finished coat of 10mm thick rendering in CM 1:4 using 100% coarse sand over 1st coat rendered surfaces and finished surface even and smooth with using extra cement and mixed with 3% integral water proofing compound and making drip mouldings as reqiured and cured with jute gunny bag for 7 days,complete all asdirected by Engr-in-Charge.. (v) Preparation of surface and applying two coats of weather coat paint over a coat of exterior wall care puttyto match existing surfaces complete all as specified and as directed.The rates quoted by the bidders/Contractor shall include thefollowing:-(a) Work carried out up to 12 Mtr in height.(b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work andall protective measures responsibilty.(c) Removal of excavated material n exc. 50m and depositing where directed by Engr-in Charge. |
| 123 | Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such asswitches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittingsetc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from thesite and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces complete all as specified and as directed. |
| 124 | M&L forpoint wiring One light/Fan/bell point/Exhaust Fan controlled by one switch one waycomplete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core,PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 Volts grade as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3mm thick bakelite sheet white/coloured top cover complete all as specified and as directed. |
| 125 | (a) All as per items srl No 124 above but for One socket out let 5 Amps 5 Pin on same board with other switch |
| 126 | (b) All as per items srl No 124 above but for One socket out let 5 Amps 5 pin on independent board |
| 127 | (c) All as per items srl No 124 above but forOne light point controlled by two switch two way |
| 128 | All as per item No 124 here in before but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge. |
| 129 | M&L forpoint wiring One light/Fan/bell point/Exhaust Fan controlled by one switch one way complete with 1.5 sq mm single core multi stranded copper conductor PVC FRLSH insulated unsheathed 1100 Volt grade cable in and incl PVC FRLSH casing capping of size (ISI Marked) with accessories including new pressed steel terminal boxes (sunk in wall ) with 3.00 mm thick plastic laminated sheet top cover or PVC FRLSH board including PVC FRLSH top cover or Modular sunken box with modular plate and cover with 1.50 sq mm insulated unsheathed PVC FRLSHmultistranded covered copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour all as specified and directed for :- |
| 130 | All as per items srl No 125 above but for One socket out let 5 Amps 5 Pin on same board with other switch |
| 131 | All as per items srl No 125 above but for One socket out let 5 Amps 5 pin on independent board |
| 132 | All as per item No 125 here in before but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge. |
| 133 | M&L for modular point wiring One light/Fan/bell point controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core,PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dollyand including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator withsleek and curvy cover plates, for mounting ofmodularswitches, sockets, fan regulators complete all as specified and as directed. |
| 134 | All as per items srl No 133 above but for One socket out let 5 Amps 5 Pin on same board with other switch |
| 135 | All as per items srl No 133 above but for One socket out let 5 Amps 5 pin on independent board |
| 136 | All as per item No 133 here in before but with FRLS multistranded cable of size 2.5 Sqmm and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge for:- One socket outlet 15 Amp power point on Independent board. |
| 137 | Material and labour in replacement for Elect bell AC 230 Volts single phase musical type complete all as specified and as directed. |
| 138 | Material and labour for bell push flush type 5 Amps . |
| 139 | Supply and fixing switch piano flush type 5 Amps single pole one way. |
| 140 | Supply and fixing socket out let 2 in 1 multi pin 5 Amps flush type universal |
| 141 | Supply and fixing switch piano15/16 Ampsone way 240 volts |
| 142 | Supply and fixing socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts. |
| 143 | Supply and fixing modular switch 6 Amps single module one way. |
| 144 | Supply and fixing Piano switch 6 Amps single module two way. |
| 145 | Supply and fixingmodular socket 6 Amps 5 pin double module. |
| 146 | S&F modular switch 16 Amps single module |
| 147 | Supply and fixingmodular socket 6&16 Amps 5 pin double module. |
| 148 | Supply and fixingmodular Fan step regulator 120W, two module |
| 149 | Supply and fixingstepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and as directed |
| 150 | Supply and fixing Ceiling rose on PVC FRLS board size 65 X 50 mmthree terminal complete all as specified and as directed |
| 151 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps B curve type ,230 volts, 10 KA complete all as specified and as directed |
| 152 | Supply and fixing Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 153 | S&F in replacement of old unsv LED Tube light1 X 20 watt (04 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. |
| 154 | S&F in replacement of old unsv LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 155 | S&F in replacement of old unsv LED 15 watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head LED luminaire comprising of high brightness LEDs, IP54 protection complete all as specified and as directed. |
| 156 | S&F in replacement of old unsvLED Decorative wall light fixture made up of Polycarbonate, suitable for LED Bulb 09/12W(B-22 base) complete all as specified and as directed. |
| 157 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and includingnon metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealedin wall includingaccessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge.NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length. |
| 158 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and includingnon metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealedin wall includingaccessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge.NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length. |
| 159 | S&F in replacement of old unsv LED Tube light 20 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed. |
| 160 | S&F in replacement of old unsvLED Tube light 10 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed. |
| 161 | Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing all as specifiedanddirected. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface. Make:- Legrand /C&S /L&T /INDOASIAN |
| 162 | Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 12 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing complete all as specified and as directed.Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface. |
| 163 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 164 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 165 | Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanised earth lead wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe25 mmbore including provision of concrete pitmade from PCC (1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plate No 3 of SSR 2009 Part-I and connecting to Poles all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail