|
| 1 | Part A: PCC - 101&102 |
| 2 | Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 500 mm x 1600 mm long |
| 3 | Cost of M.S. Plate Bending |
| 4 | Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets |
| 5 | Cost of DA & oxygen |
| 6 | Cost of welding of above mentioned M.S. Plate |
| 7 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 8 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 500 mm dia X 18 mm thick plate |
| 9 | Cost of plate welding (flange both side) by groove cutting |
| 10 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 11 | Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 160mm X 120mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances |
| 12 | Cost of fitting of complete drum set including side plates, boss along with 08 nos. stiffeners |
| 13 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 14 | Cost of painting of complete drum by oil paint for making of rust proof |
| 15 | Part B: PCC-103 |
| 16 | Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 800 mm x 1400 mm long |
| 17 | Cost of M.S. Plate Bending |
| 18 | Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets |
| 19 | CoSt of DA & oxygen |
| 20 | Cost of welding of above mentioned M.S. Plate |
| 21 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 22 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 800 mm dia X 18 mm thick plate including 10% as machining allowance |
| 23 | Cost of plate welding (flange both side) by groove cutting |
| 24 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 25 | Labour cost for dismantling, welding, gas cutting, preheating, grinding machininng 02 nos new keyway making through slot cutting in both side boss and again assembling complete drum |
| 26 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 27 | Cost of painting of complete drum by oil paint for making of rust proof |
| 28 | Part C: PCC-104 |
| 29 | Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: 215 mm x 1600 mm long including 10 % as cutting and maching allowances |
| 30 | Cost of M.S. Plate Bending |
| 31 | Cost of welding of above mentioned M.S. Plate |
| 32 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 33 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 215 mm dia X 16 mm thick plate including 10 % as cutting and maching allowances |
| 34 | Cost of plate welding (flange both side) with the new shell |
| 35 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 36 | Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 160mm X 120mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances |
| 37 | Cost of fitting of complete drum set including side plates, boss along with 08 nos. stiffeners |
| 38 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 39 | Cost of painting of complete drum by oil paint |
| 40 | Part D: PCC-105 |
| 41 | Cost of DA & oxygen for preheating |
| 42 | Cost of Dismantling Charges |
| 43 | Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: dia 215 mm x 1600 mm long |
| 44 | Cost of M.S. Plate Bending |
| 45 | Cost of welding of above mentioned M.S. Plate |
| 46 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 47 | Cost of fitting of complete drum set including side plates, boss |
| 48 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 49 | Cost of painting of complete drum by oil paint for making of rust proof |
| 50 | Part E: PCC -106 & 107 |
| 51 | Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 400 mm x 1600 mm long |
| 52 | Cost of M.S. Plate Bending |
| 53 | Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets |
| 54 | Coat of DA & oxygen |
| 55 | Cost of welding of above mentioned M.S. Plate |
| 56 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 57 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 400 mm dia X 18 mm thick plate including 10% as machining allowance |
| 58 | Cost of plate welding (flange both side) by groove cutting |
| 59 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 60 | Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 180mm X 140mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances |
| 61 | Labour cost for dismantling, welding, gas cutting, preheating, grinding machininng 02 nos new keyway making through slot cutting in both side boss and again assembling complete drum |
| 62 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 63 | Cost of painting of complete drum by oil paint for making of rust proof |
| 64 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
