Tender For Repair Maintenance To Pump House And Overhead Tank And Opther Misc Br Work Of Zone B Area And Day To Day Em Internal Complaints Under Ge I Gos, Ganjam-Odisha

TDR : 52957905

Tender Notice
BOQ

22 Days Left

Ganjam , Odisha

Tender Brief : Tender For Repair Maintenance To Pump House And Overhead Tank And Opther Misc Br Work Of Zone B Area And Day To Day Em Internal Complaints Under Ge I Gos

Document Fees
₹ 500 /-

EMD
₹ 81500.0 /-

Tender Value
Refer document

Submission Date
08-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	M&L for making the arrangement of scaffolding/form work upto 20-25 mtr height for preparation/complete removal of existing old decorated surface by scrapping, watering and applying two coats of Cement Base Paint on R.C.C overheadwater Reserviour/ Intze tank of One lakh Gallon Capacityall as specified and directed by Engineer-in-Charge.
2	Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.
3	S & F steel Fe-410-W (Gde 250 Quality-A) work in tubular stanchion/ angle in postincluding special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed.
4	M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, stair case oras in doors orgates of angle other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
5	M&L for preparationof new/old or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
6	Excavation in post holes (or similar holes) each n exc. 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25cm complete all as specified
7	Demolition of reinforced cement concrete of any description and in any position such as in RCC post or in RCC walls below or above ground floor complete all as specified and directed.
8	Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixedomplete all as specified and directed.
9	M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface omplete all as specified and directed.
10	Demolition of cement concrete unreinforced in ground floor and paving not exc 15cm thick (below or above ground level) complete all as specified and directed.
11	M & L P:C:C 1:4:8 Type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
12	M&L for 75 mm thick Cement concrete 1:3:6Cement concrete type C- 2 (40mm gradedaggregate)as in plinth protection complete all as specified and directed.
13	Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
14	M&L for rendering 15mm thick in CM 1:4 on fair faces of brick workor concrete surfaceof walland to be finished even and smooth with out using extra cement complete all as specified and directed
15	M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick workor concrete surfaceof walland to be finished even and smooth with out using extra cement complete all as specified and directed
16	M&L TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
17	S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long and dia of neck 11 mm to 15 mm omplete all as specified and directed.
18	S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)omplete all as specified and directed.
19	Dismantling fencing wire mesh any size or type,and removing the site complete all speciified and directed
20	S&F PVC insulated chain link fencing including line wire of size 3.15 mm dia and 100x100 mm mesh made up in mattresses or cases, lapped wire and laid in position to RCC fenccing and straining and fixing to any type of posts, straining bolts, standard bolt, incl securing or tying at crossing with and including provision of galvanized mild steel wire sraples or steel pins etc complete all as specified and directed (each line of wire to be measured for the purpose of payment)
21	S&F Flat Iron strip 40 mm x 6 mm for securing chain link fencing with RCC posts incl drilling holes, notching for wire etc.for inserting bolts incl all necessary drilling, bolting or riveting etc. complete all as specified and directed.
22	M&L fortwo coats of white wash on previously untreated (new)/old surface of RCC posts or bk wall incl preparation of surface complete all as specified and directed.
23	M&L for Preparation of old surfaces of Wall and applying One coat of white wash over old decorated surface of walls complete all as specified and directed.
24	M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper on walls all as specified and directed.
25	M&L for Preparation of old surfaces of Wall and applying one coat of Cement Base Paint on wallsall as specified and directed by Engineer-in-Charge.
26	M&L for preparing old plastered surfaces of walls, Facias, cornices etc and apply one coat of weather proof exterior emultion (Make as approved by GE) Complete all as specified and directed.
27	M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.
28	M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
29	M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of primer all as specified and directed.
30	M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of White Wash all as specified and directed.
31	Taking down and refixing in the same opening steel rolling shutter including oiling and greasing to required necessary fittings to functional shutters as required bush, Spring, MS pipe, rod lock,ball bearing, top cover, anchoring rod, hasp and staple and push pull or gear operating system, bevel gear box and crank handle etc complete all as specified and directed. (Note : Necessary constituent items required during repair of rolling shutter shall be paid seprately as given above.)
32	Dismantling post or struts embedded in concrete, brick work, masonry etc (wood, steel or R.C.C) any section, including taking out embeded portion and making good disturbed ground.
33	Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, to remove all loose dirt etc and preparing the surface complete all as directed by Engr-in-Chrg
34	M&L for rendering 15 mm thick surface as in roof with integral water proofing compound @ 3% by the weight of cement in CM 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately).
35	M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :-(a)Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b)APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm both in longitudinal and lateral direction shall be sealed/fused by flame torch application as per manufacturer instructions. (c)Applying bituminous based aluminiumpaint @ 0.20 Kgs/Sqm in two coats over APP membrane
36	Supply only water proofing compound
37	M&L forPrepolished Chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.
38	Providing and laying 60mm thick factory made chamfered edge Pre polished cement concrete interlocking paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
39	M&L preparation/complete removal of existing old decorated surface by scrapping, watering,complete one coat of alkali resistant primer, and applying two coats of exterior emulsion paint/apex (Make as approved by GE) Complete all as specified and directed.
40	M&Lfor glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
41	M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
42	Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed.
43	M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with15 mm thick screed bed or bedding layer in cement mortar 1:6, including rubbing andpolishing complete all as specified and directed.
44	Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed.
45	Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed.
46	Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings,fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.
47	Supplying and laying of25mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings, fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.
48	S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
49	S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.
50	S&F in repair 15 mmfancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.
51	S&F in repair 15 mmfancy type pillar taps chromium plated cast copper alloy of longswan neck type & quarter turn typewith or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.
52	S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.
53	S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.
54	S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.
55	S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg
56	S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg
57	S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handleinternal fitting, push button operated type with and including brackets etc complete all as specified and directed.
58	Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed
59	S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified anddirected
60	S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified anddirected
61	S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.
62	S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised ofcomplete all as specified and directed.
63	S&F in repair 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.
64	Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with puttyfor smooth finishing without andulations complete all as specified and directed. Note:- All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will beissued to contractorthrough gate passas schedule of credit against after completion of the work.
65	Material and labour for cutting chasing,pinning ofbrick/ stone/concrete wallat any height wall cutting and chases for concealedwiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed
66	M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed,multistranded,single core, coppercable 1100 volts grade cablesdrawn through in PVCConduit 20/25 mm dia medium grade ISI marked (MMS) at any height/places and all accessoriesare concealedinwalls / roofs / floors / ceiling etc. including suitable arrangements for flush mounting modular MS/GI boxes as per site requirement/suitable for modular top cover and framefor fixing of modular switches,sockets,fan regulators, blank plate etc andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with coppercable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directedfor One light point controlled by one 10amps switch.
67	All as per item no. 66 but for Onefan point controlled by one switch 10 amps, and oneregulator.
68	All as per item no. 66 but for Oneexhaust fan point controlled by one 10 amps switch .
69	All as per item no. 66 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .
70	All as per item no. 66 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on same board .
71	All as per item no. 66 but forOne bell/buzzer point controlled by onebell push.
72	All as per item no. 66 but forOne light point controlled by two 2 way switches/bed switch point
73	All as per item no. 66 but for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm incl circuit wiring complete all as specified and directed for the following:-
74	All as per item no. 73 but forOne 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.
75	All as per item no. 66for point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl circuit wiring complete all as specified and directed.
76	M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed,multistranded,single core, coppercable 1100 volts grade cablesdrawn throughPVCcasing and caping 20/25 mm width double locking medium grade ISI marked (MMS) at any height and all accessories such as Tee,bend,short piece & elbow on surface on walls / roofs / floors / ceiling etc. including providing suitable arrangements for flush mounting modular MS boxes as per site requirement/suitable for modular top cover and framefor fixing of modular switches,sockets,fan regulators, blank plate etc andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with coppercable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directedfor One light point controlled by on switch
77	All as per item no. 76 but forOnefan point controlled by one switch and regulator
78	All as per item no. 76 but forOne exhaust fan point controlled by one switch.
79	All as per item no. 76 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
80	All as per item no. 76 but forOne 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
81	All as per item no. 76 but forOne bell point controlled by one bell push.
82	All as per item no. 76 but forOne light point controlled by two 2 way switches.
83	All as per item no. 76 but forpoint wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm and incl providing circuit wiring complete all as specified and directed for One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switchon independent board.
84	All as per item no. 83 but forOne 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.
85	All as per item no. 76 but for,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl providing circuit wiring complete all as specified and directed.
86	Supply & fixing and fixing in repairs modular type switch 10 Amps, single pole,1way,1 module,240V,AC,ISI Markedcomplete all as specified and directed.
87	Supply & fixing and fixing in repairs modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Markedcomplete all as specified and directed.
88	Supply & fixing and fixing in repairs modular type bell push 6 Amps,1 module, single pole, 240 volts,AC,ISI Marked complete all as specified and directed.
89	Supply & fixing and fixing in repairs modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.
90	Supply & fixing and fixing in repairs modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed.
91	Supply & fixing and fixing in repairs modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,ACISI Markedcomplete all as specified and directed .
92	Supply & fixing and fixing in repairs modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps,ISI Markedcomplete all as specified and directed.
93	Supply & fixing and fixing in repairs call bell AC, 230 Volts single pole, multi music typeISI marked, complete all as specified and directed.
94	Supply & fixing and fixing in repairs call bellding dong AC, 230 Volts single pole, multi music typeISI marked, complete all as specified and directed.
95	Supply & fixing and fixing in repairs angle lamp holder, insulated body with back plate for batten fittingscomplete all asspecified and directed.
96	Supply & fixing and fixing in repairs ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed.
97	Supply & fixdecorative box type 20 watt light fitting,blue coloured end caps, pre-wired and including providing single/double sideLED tubelight(tube rod) white/warm 20 watt-01 Nomade of aluminium extrusion with high efficientLED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed.
98	Supply & fixdecorative box type 9 watt light fitting,blue coloured end caps, pre-wiredproviding single side LED tube 9 watt-01 No, and including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed.
99	Supply and fixing, in repairs 20 watt LED pride plus NXT batten white/warm decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,PC diffuser and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.
100	Taking down old unsv light fitting from existing location and Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2\"x2\" LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingcomplete all as specified and directed.
101	Taking down old unsv light fitting from existing location and Supply and fixed in repairs recess mounting 2\"x2\" LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can besuspended with provided kit and including connecting up with ceiling rose to fittingcomplete all as specified and directed complete all as specified and directed.
102	Supply and fixing, in repairs 40 watt LED pride plus NXT batten, warm light decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,PC diffuser and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.
103	Supply and fixing, in repairs20 watt LED batten nicolaus glamtubeintegrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired and connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.
104	Supply and fixing , in repairs 36 wattsLED supernovalight fitting high wattage complete,energy efficient, integrated design, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.
105	Supply &fixing, in repairs 40 watt LED light fittingwhite lighting, high quality materials and intergrated design, PC diffuser, reliable and robust housing structure, easy to install, efficency 125 lm/wnecessary arrangements for fixing with LED fitting to ceiling rosecomplete all as specified and directed.
106	Supply & fixing , in repairs 20 watts LEDAustra mirror light fitting,contemporary designdecorative LED lighting with extruded polycarbonate, environmentalfriendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.
107	Supply &fixing , in repairs energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed.
108	Supply &fixing , in repairs LEDbldg secruity light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protectionand including removing of old unserviceable item complete all as specified and directed.
109	Supply &fixing , in repairs LEDbldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protectionand including removing of old unserviceable item complete all as specified and directed.
110	Supply and fix GI bracket pipe of size 25 to 32 mm diaas suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 20X4 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.
111	Supply &fixing , in repairs 70 Watt LED fitting energy saving,environmental friendly,long lifewith SMD LEDs aslight source with driver included, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.
112	Supply &fixing , in repairs in sheet metal enclosurewith DD/AD type,415 volts AC,TPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.
113	Supply &fixing , in repairs in sheet metal enclosuredouble door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.
114	Supply &fixing , in repairssheet metal enclosure, , double door, 240 volts AC,SPN,DB, 16 way, flush mounting with 200amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.
115	All as per item No.114 but 12 way SPN DB,DD,240v complete all as specified and directed.
116	All as per item No.114 but 8 way SPN DB,DD 240v complete all as specified and directed.
117	All as per item No.114 but 4 way SPN DB,DD 240v complete all as specified and directed.
118	All as per item No.114 but 2 way SPN DB,SD 240v complete all as specified and directed.
119	Supply & fix andfixing in repairs mini MCB,32 A,DP \"C and motor starter with socket including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliancesincluding protection and includingremoving old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.
120	Supply & fix andfixing in repairsMCB SP 6 to 32 Amps 10 KA,\"C\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.
121	Supply & fix andfixing in repairsMCB SPN 32 to40 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.
122	Supply & fix andfixing in repairsMCB SPN 40 to63 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.
123	Supply & fix andfixing in repairsMCB TPN 32 to40 Amps 10 KA,\"C\" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.
124	Supply & fix andfixing in repairsMCB TPN 40 to63/100 Amps 10 KA,\"C\" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.
125	M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn drawnthroughand including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etcand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
126	All as per ditto item No .125, but 2 run x 6 sqmm+1 run earth wire complete all as specified and directed.
127	All as per ditto item No 125, but 2 run x 4 sqmm+1 run earth wire complete all as specified and directed.
128	All as per ditto item No .125, but 2 run x 2.5 sqmm+1 run earth wire complete all as specified and directed.
129	All as per ditto item No .125, but 2 run x 1.5 sqmm+1 run earth wire complete all as specified and directed.
130	Supply & fix andfixing in repairs suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20Amps, 10KA \"C \"series, 230 Volts,50Hzsuitable for AC\"s/Geysers complete all as specified and directed.
131	Supply & fix andfixing in repairsMCCB,125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed.
132	Taking down old unsv ceiling fan from existing location and supply and fix ceiling fan with blades, down rods, and connected accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star ratedcomplete all as specified and directed.
133	Taking down old unsv ceiling fan from existing location and supply and fix ceiling fan with blades, down rods, and connected accessories, 230 V, 1400 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star ratedcomplete all as specified and directed.
134	Taking down old unsv exhaust fan from existing location and supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.
135	Taking down old unsv exhaust fan from existing location andsupply and fix new exhaust fan, steel body AC single phase.230Volts of size 150 mm sweep with blades and frame with louvers complete all as specified and directed.
136	Taking down old unsv exhaust fan from existing location andsupply and fix new exhaust fan, steel body AC single phase.230Volts of size 200 mm sweep with blades and frame with louvers complete all as specified and directed.
137	Taking down old unsv exhaust fan from existing location andsupply and fix new exhaust fan, steel body AC single phase.230Volts of size 230-250 mm sweep with blades and frame with louvers complete all as specified and directed.
138	Taking down old unsv exhaust fan from existing location andsupply and fixing newexhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm complete all as specified and directed.
139	Taking down old unsv exhaust fan from existing location andsupply and fixing newexhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm complete all as specified and directed.
140	Taking down old unsv wall fan from existing location and supply and fixing wall fan 450 mmHi-sweep, 50 watts with double string, low noise, air delivery 70CMM, RPM-1320, overload thermal protector, 240 volts, 50 Hz complete all as specirfied and directed.
141	Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron strip of size 32 X 6 mm with suitable GI LG pipefrom earth electrodeto test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 40 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value completeall as specified and directed.
142	S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.
143	Supply and fixing TVsockets one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed.Make:-Havells (crabtree)/Legrand/Schneider or asapproved by GE
144	Supply & fix andfixing in repairs Telephone socket(RJ11) one module with top cover plate and inner frameincluding all necessary accessories and including removing of old unserviceable item complete all as specified and directed.
145	Supply & fix andfixing in repairscopper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling roseand including removing old unserviceable item complete all as specified and directed.
146	Supply & fix andfixing in repairs20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessary civil works,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed.
147	Supply & fix andfixing in repairs 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessarycivil work, nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed.
148	Supply & fix andfixing in repairs LED flood light light fitting of capacity 170 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed.
149	All as per item No.148 but forcapacity 120 watts,240V,LED light fitting complete all as specified and directed
150	All as per item No.148 but for capacity 100 watts,240V,LED light fitting complete all as specified and directed
151	All as per item No.148 but for capacity 70 watts,240V,LED light fitting complete all as specified and directed
152	Supply and fixing and in repairsgalvanised metal flush box 1/2 moduleISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.
153	All as per item No.152 but for metal box 3 module
154	All as per item No.152 but for metal box 4/5 module
155	All as per item No.152 but for metal box 6 module
156	All as per item No.152 but for metal box 8/9 module
157	All as per item No.152 but for metal box 12 module
158	All as per item No.152 but for metal box 16 module
159	All as per item No.152 but for metal box 18 module
160	Supply and fixing in repairs modular any type cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.
161	All as per item No.160 but formodular any type cover plate with frame 2 module
162	All as per item No.160 but formodular anytype cover plate with frame3 module
163	All as per item No.160 but formodular any type cover plate with frame4/5 module
164	All as per item No.160 but for modular any type cover plate with frame6 module
165	All as per item No.160 but formodular any type cover plate with frame8/9 module
166	All as per item No.160 but for modular any type cover plate with frame12 module
167	All as per item No.160 but for modular any type cover plate with frame 16 module
168	All as per item No.160 but for modular any type cover plate with frame18 module
169	Taking down and Hanging only ceiling fan, wall fans after cleaning and connecting up including provision of cable from ceiling rose/switch socket or connector to fan and including providing necessary accessoriescomplete all as specified and as directed.
170	Taking down and fitting only exhaust fanafter cleaning and connecting up including provision of cable from ceiling rose or connector to fan and including providing necessary accessoriescomplete all as specified and as directed.
171	Fixing only and connecting electric meters 10-60 Amps any type single or three phase complete all as specified and directed and including providing necessary accessoriescomplete all as specified and as directed.
172	Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixingsingle phase electronic meters temper proof LCD display with polycarbonate cover 230Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.
173	Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and Supply only three phaseelectronic meters temper proof LCD display with polycarbonate cover 415Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.
174	Supply and fix in repairs of PVC round cover blanking plate of size 2\"\" to 6\" as per site requirement with screws of existing fan junctions/ wiring junctions boxes/ loop boxes etc
175	supply and fixing hylem sheet of size 4\"x 6\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
176	supply and fixing hylem sheet of size 4\"x 8\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
177	supply and fixing hylem sheet of size 6\"x 8\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
178	supply and fixing hylem sheet of size 8\"x 10\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
179	supply and fixing hylem sheet of size 10\"x 12\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
180	supply and fixing hylem sheet of size 12\"x 18\" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.
181	Supply and fixing 1 or 2 module fan regulator piano switch type/socket type as per site requirement, electronic, stepped type, 100/120 Watts,240Volts,AC,ISI marked complete all as specified and directed.
182	Supply and fixingswitch piano type, 6 Amps, flush mounted,1 way, 240 volts,ISI markedand including removing old unserviceable item complete all as specified and directed.
183	Supply and fixing bell push6 Amps,240 volts, ISI marked and including removing old unserviceable item complete all as specified and directed.
184	Supply and fixingswitch socket outlet6Amps,5 pin,flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.
185	Supply and fixing switch socket combination 6Amps,5 pin, flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.
186	Supply and fixing switch socket combination 6/16Amps,6pin 240 volts withneon indicator type,ISI markedand including removing old unserviceable item complete all as specified and directed.
187	Supply and fixing switch socket combination 6/16Amps,6pin ,240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.
188	Supply and fixing junction boxe topplastic round cover,four terminals and including removing old unserviceable item complete all as specified and directed.
189	Disconnecting unserviceable monoblockpumpset with electric motor of capacity 10 HP 3 phase 50 Hzfrom existing position carefully and taking out complete with disconnecting main cable and suction and delivery pipe linesfrom existing foundation ,carrying out in workshop for repairs replacement of bushes ,worn out ball bearings of existing size ,gunmetal bushe, rubber gasket ,gland packing,oiling and rewinding of electric motor with super enamelled copper conductor of standard SWG of existing technical data, varnishing by F class insulation and drying with specified temperature for specified time ,reassemblying the motor and pump by replacing bush bearingcomplete with motor and pump by applying two coats of synthetic enamel paint over a coat of primer , testing of wound motor in workshop on full loadcurrent and reinstalling the same at site and commissioning complete all as directed.
190	Disconnecting unserviceable centrifugal pumpset with electric motor of capacity 7.5 HP 3 phase 50 Hzfrom existing position carefully and taking out complete with disconnecting main cable and suction and delivery pipe linesfrom existing foundation ,carrying out in workshop for repairs replacement of bushes ,worn out ball bearings of existing size ,gunmetal bushe, rubber gasket ,gland packing,oiling and rewinding of electric motor with super enamelled copper conductor of standard SWG of existing technical data, varnishing by F class insulation and drying with specified temperature for specified time ,reassemblying the motor and pump by replacing bush bearingcomplete with motor and pump by applying two coats of synthetic enamel paint over a coat of primer , testing of wound motor in workshop on full loadcurrent and reinstalling the same at site and commissioning complete all as directed.
191	Disconnecting existing electrical connections taking up unserviceable submersible pumpset 8 stage 3 phase 50 Hz 10 HP from existing position carefully and taking out/up complete with GI tubing including 3 phase cable single/double run taking up by chain pulley block and tripod system carefully from bore ,carrying out in workshop for repairs replacement of bushes ,worn out parts ,repairing of stages ,oiling and rewinding of electric motor with pvc insulated super enamelled copper conductor of standard SWG of existing technical data, varnishing by F class insulation and drying with specified temperature for specified time ,reassemblying the motor and pump by replacing bush bearing and thrust pad Painting of pump set complete with motor and pump by applying two coats of synthetic enamel anticorrosive paint over a coat of primer , complete testing of wound motor in workshop on full loadcurrent and reinstalling with lowering the same at site and commissioning complete all as directed by Engr-in-charge.
192	Supply and fix ON load change over switch 415V in sheet metal enclosure/open excution type as per site requiremet 4 pole of capacity 250 amps with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed.
193	M & L for Diesel Engine Generator No-1, 62.5 KVA installed at PAO(OR\"s) Jakson & company(KOEL)Make: Diesel ENGINE, carry out authorised technician and as per OEM recommendations up to satisfatorily level of Engr-in-Charge/JE for Complete servicing of Engine by cleaning/washing and removes oil from surface and replacing Air Filter, Diesel filter, oil filter, Fan belts and Engine oil of indian Oil 20/40 grade and tappet adjustment including replacing tapet cover gasket all as specified and directed by Engr-in Charge.
194	All as per item no. 193 but fortaking down all unserviceable gauges/ meters/ installed on Engine and install all new Temp Gauges, Oil pressure gauge, Amp Meters, Water Temp gauge along with modification of wiring and ignition system all as specified.
195	All as per item no. 193 but fortaking down existing Radiator carefully and cleaning to complete by removing top and bottom of the radiator clean all the water flowing pipes ,repairs to radiator where leakages by soldering and refixing complete by replacing foundation bolts ,nuts and foundation rubber pads etc.
196	All as per item no. 193 but fortaking down all worn out hose pipes from Engine and supply and fix new hose pipe Set all as specified.
197	All as per item no. 193 but forrepairing of Self Starter byreplacing field coil, bendix pinion, and armature assembly complete carbon brush,bearing and bush etc. Make LUCAS
198	All as per item no. 193 but for painting of Diesel Tank, panel, generator set with one coat of red oxide primer and two coat of sunthetic enamel paint by spray painting after neceassary scraping including removal of dust/ rust and preparation of amooth surface all as specified and directed by Engr-in-Charge.
199	All as per item no. 193 but for replaceing of rubber coupling of existing size with nuts,bolts and washers Guinine part of crompton Greaves.
200	All as per item no. 193 but for replacement of battery terminals of heavy duty brass with copper leads of 3 Rm long - 02 No of suilable/existing size.
201	All as per item no. 193 but fortaken down old U/S battery charger and supply and fixing automatic battery charger 16 Amps 24 voltsMake MAX
202	All as per item no. 193 but for taking down old U/S auto mains failure controller and supply and fix AMF controller Make Procon
203	M & L for Diesel Engine Generator No-1, 125 KVA installed at PAO(OR\"s) Jakson & company(KOEL)Make: Diesel ENGINE, carry out authorised technician and as per OEM recommendations up to satisfatorily level of Engr-in-Charge/JE forComplete servicing of Engine by cleaning/washing and removes oil from surface and replacing Air Filter, Diesel filter, oil filter, Fan belts and Engine oil of indian Oil 20/40 grade and tappet adjustment including replacing tapet cover gasket all as specified and directed by Engr-in Charge.
204	All as per item no. 203 but forTaking down all unserviceable gauges/ meters/ installed on Engine and install all new Temp Gauges, Oil pressure gauge, Amp Meters, Water Temp gauge along with modification of wiring and ignition system all as specified.
205	All as per item no. 203 but for Taking down existing Radiator carefully and cleaning to complete by removing top and bottom of the radiator clean all the water flowing pipes ,repairs to radiator where leakages by soldering and refixing complete by replacing foundation bolts ,nuts and foundation rubber pads etc.
206	All as per item no. 203 but for Taking down all worn out hose pipes from Engine and supply and fix new hose pipe Set all as specified.
207	All as per item no. 203 but forRepairing of Self Starter byreplacing field coil, bendix pinion, and armature assembly complete carbon brush,bearing and bush etc. Make LUCAS
208	All as per item no. 203 but forPainting of Diesel Tank, panel, generator set with one coat of red oxide primer and two coat of sunthetic enamel paint by spray painting after neceassary scraping including removal of dust/ rust and preparation of amooth surface all as specified and directed by Engr-in-Charge.
209	All as per item no. 203 but forReplaceing of rubber coupling of existing size with nuts,bolts and washers Guinine part of crompton Greaves.
210	All as per item no. 203 but forReplacement of battery terminals of heavy duty brass with copper leads of 3 Rm long - 02 No of suilable/existing size.
211	All as per item no. 203 but forTaken down old U/S battery charger and supply and fixing automatic battery charger 16 Amps 24 voltsMake MAX
212	All as per item no. 203 but for Taking down old U/S auto mains failure controller and supply and fix AMF controller Make Procon
213	Dismantling existing burnt out (125 KVA GD set at PAO(OR\"s) Jakson & company(KOEL)) alternatorcarefully without any damages from the DG set and incl providing M&L for winding works including providing necessary lifting,loading and unloading, transportation and necessary tools and technicians, including providing suitable cage enameledcopper winding wire(copper preferred for higher conductivity and efficiency) ot lessthen asexisting cageproper windings based on industry standards for typical brushlesssynchronous alternator used in 125 KVA DG set,proper insulation,temperature limits as reqd,voltage regulations,maintained power factor 0.8, Short-circuit,frequency,short-circuit ratio,harmonic,widing pitch,induced voltage per turn,performance and efficiency-90-96%,overloadcapacity 110%, complete winding work fully satisfactorily level upto JE/Engr-in-Charge complete all as specified and directed.
214	Dismantling existing burnt out (62.5 KVA GD set at PAO(OR\"s) Jakson & company(KOEL)Make) alternator carefully without any damages from the DG set and and M&L for winding works including providing necessary lifting,loading and unloading, transportation and necessary tools and technicians, including providing suitable cage enameledcopper winding wire(copper preferred for higher conductivity and efficiency) as existing cageproper windings based on industry standards for typical brushleshsynchronous alternator used in 62.5 KVA DG set,proper insulation,temperature limits as reqd,voltage regulations,maintained power factor 0.8, Short-circuit,frequency,short-circuit ration,harmonic,widig pitch,induced voltage per turn,performance and efficiency-90-96%,overloadcapacity 110%, complete winding work satisfactorily level upto JE/Engr-in-Charge complete all as specified and directed.
215	Supply and fixcable junction box water & fire retardent,flame proof out door type of approved sizeas per site reqt,hinged/screwed type made of SMC plastic single door with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps,240V,10KA,\"C\" Seriesand including galvanised flat iron clamps of size 25X5mm thick-02 Nos GI nuts, bolts &washers etc for fixing on PCC/Steel tubular pole/ wall surface etc and including removing of old unserviceable item complete all as specified and directed.
216	Material and labour for PVC conduit heavy duty of size 20 mm diafrom looping box to Street light connector, holding inMS clamp of size 25X2 mm thickat every one mtr used in each pole 04 Nos of clamps with necessary nut,bolts and washers etc and including PVC sheathed three core multistranded copper conductor cable of size 1.5 sqmmfrom looping box to light fitting connector and including removing of old unserviceable item complete all as specified and directed.
217	M & Lfor complete cleaning the area at near water supply & electricalinstallation, DG set installations including cutting of grass, dismantaling of small plants/ vgitation etc surrounding of installations /bldgs ( 25sqmx25sqm) etc as per requirement and installation desided time to time by Eng-in-Charge all as directed.
218	M & Lfor replacement of battery lead/cable 3 foot long at copper wire with (positive & negative) connected from DG set self to battery terminal as per sample
219	M & Lfor replacement of copper/brass termials from battery terminal as per sample
220	Dismentling old battery from starting system of DG sets of capacities 62.5 KVA including necessary wires and supply and fixmaint free lead acid battery 12 V 100 AH with brass terminals for negative and positive terminals complete of DG set 62.5 KVA including testing.
221	Dismentling old battery from starting system of DG sets of capacities 125 KVA including necessary wires and supply and fix maint free lead acid battery 12 V 180 AHwith brass terminals for negative and positive terminals complete of DG set 120/125 KVA including testing.
222	M&L for boring / drilling bore of dia suitable for 200/250mm dia HDPE pipes by any suitable method (by DTH-cum-rotary or reverse rig method or hammering method) by reaming upto 300 mm dia to a depth of 60 mtrs in any type of soil including disposal of materials obtained (soils, boulders, any rock strata etc ) from boring to a distance not exceeding 50 mtrs with & including collection of logical samples ( drilling / cutting ) & to maintain drill time log book complete all as specifiedand directed
223	Development of borewell including flushing out tree routs, fine sand by air compressor of suitable capacity not less than 450 CFM at 150 PSI & over pumping (25% extra capacity pump) to make water free from turbidity till clear water is obtained from bore well complete all as specified and as directed (pumping for minimum 16 hours, the upper limit for duration of development shall be the time technically required to give results of development as per IS.. nothing extra shall be payable on account of increase in numbers of pumping hours actually required at site in excess of minimum period as above )
224	M&L lowering casing pipe 200mm dia HDPE pipe of material grade PF-80, PN 10 (pressure rating 10 Kg per sqcm) DN 200, confirming to IS-4984 (1955) for protection of sides from falling during the process of drilling including required cutting, jointing etc complete all as specified and as directed
225	Filling annular space between casing pipe & bore hole with & including river bed stone pebbles of size/ grading 5 to 8 mm dia including packing complete all as specified & directed
226	M&L for yield test for bore hole after completion of development of bore well by pumping of 16 hours to determine the safe pumping yield complete all as specified and as directed
227	S&F steel rope in submersible bore wells from motor to top edge of the bore well of size 6 mm dia for holding of submersible pump motor set complete all as specified and as directed
228	S&F bore cape of size 200/250 mm dia with MS clamp for holding of pump set and column pipe complete all as specified and as directed
229	S&F submersible cable weather proof with multistraded copper conductor 3 core of size 6 sqmm 1100 volts grade heavy duty including all accessories for connectingpumpto panel board, testing and commissioning complete all as specified and as directed
230	Supply and fixing submersible pump, electric driven 415 v,TP suitable for 200/250 mm bore well (Casing pipesize200/250mm)supply and install 3 HP, 40 mtr Head,105LPM, 38mm outlet (Model KS4C- Series Make :Kirloskar/CRI including lowering by manpower & mechanical complete all as specified and directed.)
231	S&F GI Pipe 50mm dia & 3 meter long (ISI Marked) class \"C\" heavy duty column pipe, with long screwed end, with 100 mm long GI socket heavy duty, fixed with spot welding complete all as specified
232	Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to galvanised iron strip 32mm X 6mm (as earth lead strip), by means of bolt, nuts, check nuts and washer of GI and GI strip protected by provision of GI pipe light grade, 40mm bore upto test point including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25 x 25 x 3 mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metres long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.NOTE :- Item of earthing includes the cost of 7.5 metre long galvanised iron strip 32mm X 6mm size and protection pipe of 40 mm bore galvanised iron light grade.
233	S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all fittings required at site complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C
234	S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete Including neceesary fittings all as specified and directed.
235	S&F in repair of PP-R male threaded coupling (brass inlet) as per requirement of size 63 mm OD complete all as specified and directed.
236	S&F in repair of PP-R Female threaded coupling (brass inlet) as per requirement of size 63mm OD complete all as specified and directed.
237	S&F in replacement of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed.
238	Supply in replacement of Brass Non return valveas per requirement of the site of size 50 mm diacomplete all as per specified and directed .
239	Supply only fabricated flat ironMS clamps 25X5mm & 30 mm x 6 mm as required and including necessary holes,nuts,bolt and washers etc andbending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one undre coat and one finishing coat of paint and directed
240	Material and labour for PCC poles painting of any type/size/length and removing from existing pole painting by using wire brush and using with emary paper and cleaning with water after cleaning of pole and GI brackets and cross arms in two coats ofprimer and two coats of cement based wthite painting upto smooth finishiningand painting upto 1.2 mtrat bottom layer by layer 30 cm by 30 cm with yellow and blackto satisfactorly by engr-in-charge and painting work carryout at any height and including marking of pole numers as directed and safety eqpts & tools will be own arrangement and complete all as specified and directed.Note:- Cost of painting materialis deemedto be included in quoted rate only.
241	Material and labour for two pole structure pole painting of any type/size/length and removing from existing pole painting by using wire brush and using with emary paper and cleaning with chemical agents after cleaning of steel tubular pole and GI brackets and cross arms in two coats of red oxide primer and two coats of silver oil painting upto smooth finishiningand painting upto 1.2 mtrat bottom layer by layer 30 cm by 30 cm with yellow and blackto satisfactorly by engr-in-charge and painting work carryout at any height and including marking of pole numers as directed and safety eqpts & tools will be own arrangement and complete all as specified and directed.Note:- Cost of painting materialis deemedto be included in quoted rate only.
242	M& L for providing reinforced cement concrete type B-1, 1:2:4 (20 mmgraded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed
243	S &F 2.5 mm thick plain mild steel wire, galvanised class 3,in fencing including straining and fixing to wood,concrete or steel posts and/or to straining bolts, including securing with and provisionof galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed(each line of wire to be measured)
244	S &F for gate fabricationwith framed work such as grills,gratings, etc.. with ends of barss houldered and/or riveted,or forged into spikes; frame dguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
245	Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cm deep and getting out complete all as specified and directed.
246	Supply and filling Graded coarse aggregate complete all as specified and directed.
247	Supply and filling in and speading unwashed river sand for cushioning and punning to provide requiredcomplete all as specified in SSR Part-I and as directed.
248	Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portioncoping of pole and filling of foundation etc including necessary use and waste of form work and inluding dismantling old coping/ PCC work etc,complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor costdeemed intoquoted rate only.
249	M& L for providing and fixing stainless steel (Grade-304) railing made of hollow tubes,channels,plates etc,including welding,grinding buffing,polishing and making any curvature/design/square shape (where ever required) and fitting the same with necessary stailess steel nuts and bolts and washers completely,including fixing the railing with nescessaryaccessories & stainless steel dash fasteners,stainless steel bolts etc of required size/design as user & site requirement,on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
250	M&L for computerisedprintof unit name board by blue coloured3 mm thick laminated acrylic back ground sheetas per site requirement and white/coloured letters with LED boarder lighting ( IFA GOPALPUR) andnew decorated frame around the boarder of the top ame plate boardwith & including stainless steel screws of suitable size complete all as specified and directed.Note:- Name & details of units shall be provided by Engineer-in-Charge/user separately during execution.
251	Material and labour for reguler inspection(once in a six month to every DG Set of capacity125 KVA -01 No) of DG sets of various capacities ( Complete \"B\" check of installed existing DG set - carry out authorised technician and as per OEM recommendations up to satisfatorily level of Engr-in-Charge/JE) installed at various locations by the authorised technician / service engineer of OEM or their authorised service dealer, checking the mechanical and electrical healthyness of the diesel engine and alternator, minor and major servicing of the DG set including providing of new materials such asair filter, fuel filter and lub oil filter,Engine oil (oil filled authorised their capacities ),Necessary coolant,leakages,rubber seals & washers,nuts,bolts,oil seals etc andtime to time, minor adjustment of control parameters, tracing out the defects all as directed by Enge-in Charge.
252	Material and labour for reguler inspection(once in a six month to every DG Set of capacity 62.5 KVA) of DG sets of various capacities ( Complete \"B\" check of installed existing DG set - carry out authorised technician and as per OEM recommendations up to satisfatorily level of Engr-in-Charge/JE) installed at various locations by the authorised technician / service engineer of OEM or their authorised service dealer, checking the mechanical and electrical healthyness of the diesel engine and alternator, minor and major servicing of the DG set including providing of new materials such asair filter, fuel filter and lub oil filter,Engine oil (oil filled authorised their capacities ),Necessary coolant,leakages,rubber seals & washers,nuts,bolts,oil seals etc andtime to time, minor adjustment of control parameters, tracing out the defects all as directed by Enge-in Charge.
253	Taking out split type air conditioners from existing location indoor and out door units complete at any height and including providing transporting and technicians for repairs & repairing works,servicing and overhauling of any capacity 1.5/2.0/2.5 TR of any make/type after disconnecting refrigerant pipes, drain pipe and electric connection, removing dry dust by using blower and providing after water servicing by presure pump with cleaning agents the Condenser coil /cooling coils and all components by using water and caustic soda/cleaning with chemical agents after completion of cleaning checking the - weak cooling. air \|filter, refrigerant level,evaporate coil, water leakages-clear drain pipe or check drain pan, check -blower fan indoor unit,etc damaged spares and replacing the spares like coils,evaporator, Compressors,evaporator filling refrigerant, condensor, relay, PCB(Microprocessor Control Board) boards, capacitors, thermostat, expansion valves fan/swing motor, blades & air blower, air filters,condenser \|coil(Heat exchanger), insulation,capilary tube(expansion valves), Refrigerant line,Noise suppressor, overloadprotective device,pipingCupper tube, UV light,electrical wiring,condensor fan etc and also including carrying out servicing, overhauling and connecting of refrigerant pipe,drain pipe and charging of refrigerant gas and testing and including fixing back in its original location/directed locations testing will be ambient satisfaction level by JE/Engr-in-charge. Note: (i) All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will be issued to contractor through gate pass as schedule of credit against contract agreement. (ii) Spares will be measured and paid separately as supply only items (iii) Charging of refrigerant shall be measured and paid seperately.
254	Leak testing the complete gas circulating system with dry nitrogen & evacuate and Job \|rectifying/arresting leakage by cutting, soldering,flaring work with nut, jointing of refrigerant\| \|tubing and charging of refrigerant gas to the required pressure in split type air conditioner upto 2 TR capacity and testing complete all as specified and directed Note:- Refrigerant will be measured and paid separately.
255	Charging of Refrigerant R410A or R32/R22 suitable for split AC 1.5 to 2TR after cleaning of condenser unit, evoporator unit, brazing suction/discharge tubes where required with suitable sİze of copper tubes, vaccuming, making system leak proof and achieve proper cooling effect after charging of refrigerant its fully satisfaction by JE/Engr-in-charge and complete all as specified and directed.
256	Supply only compressor of split type air conditioner of 1.5 TR capacity as per suitable for existing at site requirement and including providing initial filling of refrigerant gas to the required pressure and necessary testing complete all as specified and directed.
257	Supply compressor suitable for inverter technology type for split type air conditioner of 1.5 TR capacity as per suitable for existing at site requirement and including providing initial filling of refrigerant gas to the required pressure and necessary testing complete all as specified and directed. Make : Copeland / Emerson / lndofossWoltas / Hitachi / Tecumseh / Kirloskar/LG/Blue Star/O-General
258	Supply only compressor of split type air conditioner of 2 TR capacity as per suitable for existing at site requirement and including providing initial filling of refrigerant gas to the required pressure and necessary testing complete all as specified and directed. Make : Copeland/Emerson/Indofoss/ Voltas/Hitachi/Tecumseh/Kirloskar/LG/Blue Star/O-General
259	Supply only compressor suitable for inverter technology type for split type air conditionerof 2.0 TR capacity as per suitable for exísting at site requirement and including providing \|initial filling of refrigerant gas to the required pressure and necessary testing complete all as specified and directed.Make : Copeland/Emerson/Indofoss/Voltas/hitachi/Tecumesh/Kirloskar/LG/Blue star/O-general Star/Carrier/Voltas/O-General etc.
260	Supply only Sensor unit with complete PCB, circuit wiring assembly with RC suitable for 1.5 TR/2TR split type AC\"s of any make as existing/as per site requirement complete all as \|specified and directed.Make :- LG/Sumsung/ Carrier/Blue Star/Carrier/Voltas etc.
261	Supply only sensor unit with complete PCB circuit wiring with RC suitable for inverter based techology type 1.5 TR/2TR split type AC\"s of any make as per site requirement complete all as specified and directed Make :- LG/Samsung/Carrier/Blue star/Voltas/O-General etc
262	Supply only Auto sensor unit & RC suitable for LG/Samsung/Carrier/Blue star/Carrier make for split AC 1.5/2.0 Ton capacity
263	Supply onlyCooling coil/condensing unit assembly complete and all connected all accessories for making functioing requirement suitable for 1.5/2TR split type AC\"s as per existing/site requirement complete all as specified and directed
264	Supply only Blower motor with extended shaft and rotary blade complete assembly single phase 230V AC suitable for indoor unit of split AC 1.5/2.0 TR make samsung/LG/Blue stary/videocon/carrier/Voltas/LG/Daikin/O-General
265	Supply only Fan motor with blade assembly suitable for outdoor unit of split AC 1.5/2.0 TR make samsung/LG/Blue star/Videocon/carrier
266	Supply only Swing motor complete suitable for indoor unit of split AC 1.5/2.0 TR single phase 230V AC suitable for indoor unit of split AC 1.5/2.0 TR make : Samsung/LG/Blue star/Videocon/Carrier
267	Supply only Air filter suitable to fit with indoor unit of split AC of capacity 1.5T/2TR as per sample of make LG/Blue star/Videocon/Carrier/Blue star/Tempair/Voltas/Hitachi
268	Supply only universal strainer cum dryer suitable for split AC of make LG/Blue star/Videocon/Carrier/Blue star/Tempair/Voltas/Hitachi
269	Supply only Relay complete assembly suitable for split type AC single phase 230V AC, 50Hz complete as per existing or as per site requirement complete all as apfd and directed Make Sriram model SR 1622 or equivalent
270	Supply onlyOverload protector for compressor in split AC\"s outdoor units as per existing complete all as spfd and directed
271	Supply onlyBlower motor Capacitor 1.5/2.5/4/6 MFD 230 vot 50 Hz make : Keltron/Usha/Siemens/sarda
272	Supply onlyRunning capacitor 45/50/60 MFD 230Volts, 50 Hz suitable for 1.5/2T S/AC.Make: KELTRON /USHA/ SIEMENS/Annapurna
273	Supply only Stating capacitor 80-100 mfd and 100- 120 MFD 230Volts,50 HZ Make:KELTRON /USHA/ SIEMENS
274	Supply only Supply only 2/3 way brass valves suitable for outdoor units in split AC\"s of capacity 1.5 TR as per existing or as per site requirement.
275	Supply only Supply only heavy duty MS wall bracket suitable for fixing of out door unit of split type AC\"s with necessary nuts, bolts & washers and removing old unserviceable items complete all as specified and directed Make:- As per sampie
276	Supply only Remote and batteries with stand suitable for split AC\"s 1.5/2 TR as per existing type Compiete all as spfd and directed.
277	Supply only Supply only flexible good quality drain pipe and S&F external UPVC/C- PVC drain pipe medium grade 20/25 mm diafixing properly with all accessories bend,Tee, Short pieces,saddles,clamps at as per site requirement complete all as spfd and directed
278	Supply and fixing air conditioner copper tubes/piping for heat and cold foam insulation for pipe 1/2\" ID x 1/2 \" &1/4\" ID x 3/4,5/8\",3/8 \" thickness foam best quality with proper packing tape of complete one unit with all accessories complete all as specified and directed.
279	Taking down/disconnecting of electrical connections of split type AC 1.5/2 TR with indoor and outdoor units completely. Shifting from one location to anether location as directed without any damage of machine/AC\"s and refixing the same properly and including providing \|transportation and technicians and testing satisfactorily complete all as specified and directed
280	Removing the UNSV water purifier from its position and opening the purifier, cleaning the same and replacement of the damage spare parts like new candle, 3 in 1 cartridge set, electronic ballast,external pre-filter set and assembling the same after testing and fitting complete all as specified and directed.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Civil Construction Tenders

Pump House Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair Maintenance To Pump House And Overhead Tank And Opther Misc Br Work Of Zone B Area And Day To Day Em Internal Complaints Under Ge I Gos, Ganjam-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair Maintenance To Pump House And Overhead Tank And Opther Misc Br Work Of Zone B Area And Day To Day Em Internal Complaints Under Ge I Gos, Ganjam-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us