Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-12-2025 | Corrigendum No 01 | Other | 05-01-2026 |
| Sl. No. | Item Description |
| 1 | Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and removing rubbish upto a distance of 50 Metres outside the periphery of the area complete all as specified and directed by Engineer - in - Charge. |
| 2 | Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified. |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point as specified and directed. |
| 5 | M&L PCC 1:5:10 type E-2 (using 40 mm graded stone agg) as in foundation, subbase masonary complete all as specified & directed. |
| 6 | M&L for brick work with sub class \"B\" bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM 1:6 all as specified. |
| 7 | M&L for brick work with sub class \"B\" bricks using old size bricks (half brick thick) straight or curved on plan exc 6m mean radious built in CM 1:4 all as specified. |
| 8 | M&L for Reinforced cement concrete (Nominal mix) M-25 (20mm graded aggregate) Type-B1 as in Foundation including rafts ,plinth beams , footings for column etc |
| 9 | M&L for Reinforced cement concrete (nominal mix) M-25 (20mm graded aggregate) type-B1 as in lintles, roof beams, etc |
| 10 | M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for Reinforced cement concrete (nominal mix) M-25 (20mm graded aggregate) type-B1 as in slabs, Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like all as specified and directed by Eng-in-Charge |
| 12 | M & L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and directed by Engineer - in - Charge. |
| 13 | M & L Form work to soffits of suspended slabs flat surface of concrete finishedrough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 14 | M&L for Use and waste of form work tosides and soffits of roof beams & lintels over 1.50 m clear span complete all as specified |
| 15 | M&L for Hardcore of broken stone or boulders of gauge n. exc 63mm, deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified. |
| 16 | M&L 40mm thick PCC 1:2:4 (20mm graded aggregate) type B-1 as in subbase for receiving floor tiles complete all as specified and directed. |
| 17 | M&L 75mm thick PCC 1:3:6 (20mm graded aggregate) type C2 as in plinth protection finishing the surface even and smooth with out using extra cement |
| 18 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified. |
| 19 | M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation ofsurfaces, complete all as specified and as directed. |
| 20 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 21 | M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash complete all as specified and directed by Engr-in-Charge |
| 23 | M & L preparation of plastered and unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed by Eng-In-Charge. |
| 24 | S&F Mild steel TMT bars 6mm to 8 mm dia ,as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position all as specified. |
| 25 | Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all asspecified and directed by Engineer-in-Charge. |
| 26 | S/F solid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening |
| 27 | S &F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottomrails. M.S. frame shall covered with heat moulded plain colour PVC \"C\" channel having a PVCsheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings |
| 28 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mmcompleteincluding filling of chowhats qith PCC (1:2:4) type B-0 using 12.5mm graded aggregateall as specified and directed by Engr-in-Charge |
| 29 | S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but divided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge |
| 30 | S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed by Engineer-in-charge. |
| 31 | S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specifed and directed by Eng-In-Charge. |
| 32 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specifed and directed by Eng-In-Charge. |
| 33 | S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specifed and directed by Eng-In-Charge. |
| 34 | Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC. |
| 35 | S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil puttyall as specified. |
| 36 | S/Ffor stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screwswith bolts incl leaping wooden. |
| 37 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge. |
| 38 | S&F fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specifed and directed by Eng-In-Charge. |
| 39 | S&F15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. |
| 40 | Supply and fixfor vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specifed and directed by Eng-In-Charge. |
| 41 | S&F in repairs vitreous china wash down water closet panORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Eng-In-Charge |
| 42 | Supply and fixofvitreous chinabowl urinals flat back,half stallcomplete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, urinal spreader,jointing around urinal back in cement paste includingflush pipe, grating and union for discharge pipe as specified. |
| 43 | S&F shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. |
| 44 | S&F 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws. |
| 45 | S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 46 | M/L for glazed ceramic coloured tiles in vertical surface 450 x350 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed(1:4) complete all as specifed and directed by Eng-In-Charge. |
| 47 | M/L for non skid ceramic tiles light shade tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.06sqm not exc 0.11 Sqmin floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Eng in Charge |
| 48 | M/L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specifed and directed by Eng-In-Charge. |
| 49 | M&L for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid all as specified. |
| 50 | M&L for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid all as specified. |
| 51 | M&Lfor 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and fixed in floors complete all as specifed and directed by Eng-In-Charge. |
| 52 | S&F 75 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge. |
| 53 | S&F PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 54 | S&F vent cowl 75mm complete fixwd tio pipe all as specified and directed by Eng-In-Charge |
| 55 | S&F rotational moulded polythelene water storage tanks 500ltrs capacity with threaded lid white colour hoisted and fixed in postion incl fittings and as directed by Engr-in-Charge |
| 56 | S&F inacrylic shelf 450mmx100mm fixed with chromium plated brass screws and plastic gutties complete all as specified and directed by Eng-In-Charge. |
| 57 | S&F soap dish chromium plated heavy duty complete all as specified and directed. |
| 58 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs |
| 59 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 15mm fixed in repairs |
| 60 | S& F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-455gms)as directed by Engr-in-Charge |
| 61 | M & L rendering 10mm thick on brick or concrete surface in cement mortar 1:3 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge Note- Water proofing compund to be measured and paid seprately. |
| 62 | Supply and apply high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm. Note: Application should be done with company authorised applicator. |
| 63 | M&L for pre cast cement concrete 1:2:4 as in man hole covers type B-1 (20 mm graded agg) as in manhole cover set in cement mortar 1:6 complete all as specified and directed. |
| 64 | Supply & fix SGSW 150mm dia drain pipes laid in trenches and jointed as specified. |
| 65 | M&L PCC 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm dia NP-2 pipe complete all as specified & directed. |
| 66 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 M dia X 3.0 M effective depthcomplete all as specified and directed by Engr-in-Charge |
| 67 | M&L for LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 user complete all speciifed and directed by Eng-In-Charge |
| 68 | Dismantling offloor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Eng in Charge |
| 69 | M/L for vitrified ceramic coloured tiles 10 mm thick light shade (square/rectangular)area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge |
| 70 | Demolition ofcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 71 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 72 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla white putty complete all as specified and directed by Engr-in-Charge |
| 73 | M/L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 74 | S&F 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed |
| 75 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing oretc and making good complete all as specified and directed. |
| 76 | S&F 75 PVC (SWR) junction single,(single T)equal or unequal complete all as directed by Engineer-in-Charge. |
| 77 | M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed by Eng-In-Charge. |
| 78 | M&L for machine cut kota stone slab flooring for Landing and flooring 20 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed by Eng-in-Charge. |
| 79 | M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed by Eng-in-Charge. |
| 80 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises. |
| 81 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 82 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 83 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla white putty complete all as specified and directed by Engr-in-Charge |
| 84 | M & L applying two coats of exterior emlsion paint on plastered or unplastered wall surface over a coat of primer including preparation ofsurfaces, complete all as specified and as directed. |
| 85 | M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories,bath and WC\"s etc shall be as under:- |
| 86 | (i) Application of Two component acrylic modified cementitious coating.(a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litanceand any other form of surface contamination. the installation instructions in manufacturer\"s published literature should be strictly compiled with, including but not limited to the following:-(b) Chipping out any visible cracks in \" V- Groove\" pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROCNitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required.(c) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO.(d) While the surface is still damp from saturation(SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer\"s instructions.(e) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet.(f) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer\"s instructions on the entire area.(g) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.(h) The waterproofing coating should be taken to a height minimu 300mm above the finished floor level on the vertical surface.(j) It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking. |
| 87 | (k) A protection plaster ( 12-15 mm thick) in CM 1:3admixed with appropriate integral water proofing compound has to be applied on the walls.(l) Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces.Admixutre for item( k&l) above : Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645(m) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP.(n) The membrane has to be protected in accordance with the manufacturer\"s recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer\"s recommendations.(o) waterproofing treatment has to be carried out through applicators authorised.(ii) All the joints of pipesand traps within sunken portion shall be selaed properly by Epoxy sealant.(iii) All CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) all - round.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified.(v) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified.Note :- Item (iv),(v) & (vi) above shall be measured and paid seprately. |
| 88 | M&L for providing GI pipe heavy class of dia 40mm all as specified and directed by Eng-In-Charge |
| 89 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed. |
| 90 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4.00 sqm each complete all as specified and directed. |
| 91 | S &F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specifed and directed by Eng-In-Charge |
| 92 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed. |
| 93 | M&LPCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engineer-in-charge. |
| 94 | Dismantling boarding, cupborad any description, fixed in any position complete all as specified and directed by Eng-In-charge |
| 95 | S&F PVC cupboard of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed |
| 96 | S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed. |
| 97 | S&F prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shelf complete all as specified and directed by Engineer-in-charge. |
| 98 | S&F Stainless steel round closet rod of 40mm dia,2mm thick wardrobe hanger rod, rod for hanging clothes in wardrobe with end supports including all screwing fittings complete all as specified and directed by Engineer-in-charge. |
| 99 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed by Eng-In-Charge |
| 100 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 101 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 102 | S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (d)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately. complete all as specified and directed. |
| 103 | S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 104 | S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with metal beads all as specified all as specified and directed by Eng-in-Charge |
| 105 | S/F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified complete all as specified and directed. |
| 106 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. |
| 107 | S&F High density polyethylene pipes(HDPE) ,15mm dia, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Eng-In-Charge. |
| 108 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. |
| 109 | S&F High density polyethylene pipes(HDPE) ,20mm dia, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Eng-In-Charge. |
| 110 | S&F CP Glass corner shelf (set of three) including CP railing, radius 300mm fixed in repairs complete all as specified and directed by Eng-In-Charge. |
| 111 | S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 112 | S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and directed by Eng-In-Charge |
| 113 | S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed by Eng-In-Charge |
| 114 | Taking down eaves gutters and rainwater pipes including all fittings as specified and directed. |
| 115 | Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors as specified and directed. |
| 116 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 117 | S&F 75 PVC (SWR) junction single,(single T)equal or unequal complete all as directed by Engineer-in-Charge. |
| 118 | S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 119 | S&F 110 mm PVC (SWR) bend with complete all as directed by Engineer-in-Charge. |
| 120 | S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge. |
| 121 | Dismantiling water tank PVC 500 Ltrs and removing from site |
| 122 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs as directed by Engr-in-Charge |
| 123 | Demolition of mud in roof any thickness including plastering & leeping removed as directed by Engr-in-Charge |
| 124 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed by Engr-in-Charge |
| 125 | Supply only integral water proofing compound. |
| 126 | Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 127 | M&Lfor 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement all as directed. |
| 128 | All as per item no 124 above but except brick tiles complete all as specified and directed by Engineer-in-charge. |
| 129 | Material and labourfor 75 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slabcomplete all complete all as specified and as directed by the Engineer-in-Charge. |
| 130 | M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engineer-in-charge. |
| 131 | Earthwork in excavation by mechanical means (hydraulic excavator) means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and didposal of excavtaed earth lead upto 1.5m, as directed by Engineer-in-Charge |
| 132 | M & L for Cutting into existing manhole for connecting new drains and making good for 200 mm bore pipe and rendering, cutting out existing benching and forming branch (1/2 or 3/4 section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates, surface finished even and smooth and reforming benching as reqd. |
| 133 | M&L RCC 450mm bore class NP2 laid and jointed complete with collars laid in trenches and tested complete all as specified and directed |
| 134 | Material and labour for providing precastcement concrete in windowor door cills , lintels, ditto but in landings, cover slabs ( for manholes etc) chullah hoods, chajjas, water troughsand similar articles set in CM 1:6 using type B1 (1:2:4) (20mm graded stone aggregate) all as specified and directed by Engineer-in-Charge. |
| 135 | M&L for concrete bed to drain pipes400mm bore in cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) including packing under and completely surrounding pipes with concrete after they are laid and testedcomplete all as specified and directed |
| 136 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engr-in-Charge |
| 137 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC(FRLSH) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 138 | One light point controlled by one, one way switch |
| 139 | One fan point controlled by one, one way switch |
| 140 | One socket outlet 3 Pin, 5 Amp on independent board |
| 141 | One socket outlet 3 Pin, 5 Amp on same board. |
| 142 | One bell point controlled by one bell push |
| 143 | One light point controlled by two 2 -way switches |
| 144 | Ditto all per item no 02 above but with 2x2.5 Sq mm single core, multi-stranded copper conductor for 15A socket pointon Independent board. |
| 145 | Ditto all per item no 02 above but with 2x4.0 Sq mm single core, multi-stranded copper conductor for geyser point on Independent board. |
| 146 | S&Fswitch piano flush type single pole one way 5 Amp (ISI Marked) |
| 147 | S&F Bell push flush type single pole one way5 Amp (ISI Marked) |
| 148 | S&F switch piano flush type single pole two way 5 Amp. |
| 149 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 150 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body |
| 151 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) Make - Schnider/Siemens/Havells |
| 152 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - Schnider/Siemens/Havells |
| 153 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W. |
| 154 | M&L for bell ding dong type, AC 230 Volts, single pole (ISI Marked) |
| 155 | Taking down Ceiling/exhaust fan ceiling cable end, dismantling blades and removing fan and Each blades to E/M store yard complete all as directed |
| 156 | S&F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CMM, service value 6.00 BEE with brushless direct current motor (BLDC)complete all as specified and directed. Note: (1) Rate for trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in this rate. Make : Orient electric automiser, Crompton Energion HS 1200,Havells efficiencia. |
| 157 | S&F Exhaustfans of 230 Volt 300 mm sweep copper wound bouble ball bearing heavy duty motor, metal blade with lovour complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed. |
| 158 | S&F Exhaustfans of 230 Volt 250 mm sweep copper wound bouble ball bearing heavy duty motor, metal blade with lovour complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed. |
| 159 | Taking down energy meter of any capacity including connection and refixing the same after new wiring complete all as directed. |
| 160 | Supply, installation, testing and commissioning of 20 watt 4 feet long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be less than 2000 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. |
| 161 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type withdriver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. |
| 162 | Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughened glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Wipro/Havells/Bajaj. |
| 163 | S&F LED decorative wall Lights 16/20 W 230 V complete all as directed at site. Make: Philips : Grace Wall light/ Philips/Crompton |
| 164 | M&L in replacement for sub main wiring with two runs of single core PVC insulated(FRLSH), unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete with one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated(FRLSH), unsheathed cable as earth wire continuity conductor including cutting, chasing and making good to disturbed surface etc. complete all as specified and directed by Engineer-in-Charge. Note : Three run of 6.00 Sqmm cableand one run of PVC Conduit shall be measured & paid as one unit.) |
| 165 | Supply & fixing in replacementand Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB\"sIK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCCB 40 Amps,ICs=100%ICu, 16KA four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB\"s shallhold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCB/ MCCBshall be measured and paid separately) |
| 166 | Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, Earth bar, double door SPN 8 way 230 volts all as directed. Make- Indoasian/Legrand/Havells |
| 167 | S & F Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp.Make :Havells/L&T/Legrand. |
| 168 | S&F MCB Single pole 240 volts 6-32 Amps, 10KA, B-series, Make - Havells/L&T, Legrand |
| 169 | S&F MCB SPN 240 volts 0- 32 Amps, 10KA, B-series. Make - Havells/L&T, Legrand |
| 170 | MCB TPN 240 volts 25- 100 Amps, 16KA, B-series. Make - Havells/L&T, Legrand |
| 171 | M&L for earthingcomplete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plateusing 4 mm diaGI earth lead wire as earth lead moulded and rivetted to earthplate at one end and connected to main equipment at switch/control board at another end, GI earth leadprotected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate,GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mmthick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. |
| 172 | Supply and fix water heater ,storage type steel body with metallic inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 450 mm steel braided connection pipe with brass end terminals and grountoing bolts of suitable size complete all as specified and directed. Note:(1)Rate for taking down and trasportaion to deposit at E/M storeyard to water heater deemed to be incuded in this rate. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
