|
| 1 | Lifting/Lowering, repair/rewinding of Submersible Pumping Set of Tube Wells of Cantt Board Dehradun & other allied works/supply |
| 2 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from deep tube well and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size100mm to 150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up(Approx 75 m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement) |
| 3 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from deep tube well and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size100mm to 150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up (Approx 85 m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.( As per requirement) |
| 4 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from deep tube well and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size100mm to 150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up (Approx 110 m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement)of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.( As per requirement) |
| 5 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from deep tube well and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size100mm to 150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up (Approx 135 m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.( As per requirement) |
| 6 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from deep tube well and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size 100mm to150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up(Approx 150 m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement)of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.( As per requirement) |
| 7 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in deep tube well not less than 60 mtrs below the ground level including lowering of flange/thread column pipe size100mm to 150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 75 mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 8 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in deep tube well not less than 60 mtrs below the ground level including lowering of flange/thread column pipe size100mm to 150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 85 mtrs mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 9 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in deep tube well not less than 60 mtrs below the ground level including lowering of flange/thread column pipe size100mm to 150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 110 mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 10 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in deep tube well not less than 60 mtrs below the ground level including lowering of flange/thread column pipe size100mm to 150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 135 mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 11 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in deep tube well not less than 60 mtrs below the ground level including lowering of flange/thread column pipe size 100mm to150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 150 mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 12 | Supplying and fixing water proof cable-jointing kit suitable for submersible cable of size up to 50 Sq mm. 3 core as directed by Engineer-in-Charge. ( As per requirement) |
| 13 | Supplying of M S socket dia 150mm of M S column pipe for assembly of submersible pumping set.( As per requirement) |
| 14 | Lathe work making thread of dia 150mm M S column pipe including cartage from tube well to workshop & workshop to tube well. ( As per requirement) |
| 15 | Supplying and fixing Jointing strip (cage for submersiblepumping set 33 to 85 HP) made of flat iron of size 40x6mm. as directed by Engineer-in-Charge.( As per size for pumping set.) |
| 16 | Supplyonly both end flanged M.S. Column Pipe 150 mm with wall thickness 5.4 mm and 3 mtr long having 10 mm to 12 mm thick drilled MS flanged 8 holes of 5/8 \" dia including 4 MS strip made of MS flat 25 x 6 mmand 60 mm long welded on four side of the flange . ( As per requirement) |
| 17 | M s thread columnpipedia 150mmconverted into both end 12 mm thick drilled MS flanged 8 holes of 5/8 \" dia including 4 MS strip made of MS flat 25 x 6 mmand 60 mm long welded on four side of the flangeMS flange column pipe including cartage from tube well to workshop & workshop to tube well. ( As per requirement) |
| 18 | Supply only N R V nipple size as per submersible pumping set (i.e. 33.3HP to 85 HP) including lathe work & cartage.(length up to one meter. ( As per requirement) |
| 19 | Supply only N R Vdia 150 mm (ISI mark) ( As per requirement |
| 20 | Supplyonly both end flanged M.S. Column Pipe 100 mm with wall thickness 5.4 mm and 3 mtr long having 10 mm to 12 mm thick drilled MS flanged 8 holes of 5/8 \" dia including 4 MS strip made of MS flat 25 x 6 mmand 60 mm long welded on four side of the flange . ( As per requirement) |
| 21 | Supply only foot valvedia 150 mm (ISI mark) ( As per requirement) |
| 22 | Supply only sluce valvedia 150 mm (ISI mark) kirloskar make PN 1.6 (heavy). ( As per requirement) |
| 23 | Repairing/ Rewinding of Complete 33 HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 24 | Repairing/ Rewinding of Complete 40HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 25 | Repairing/ Rewinding of Complete 52 HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 26 | Repairing/ Rewinding of Complete 60/62 HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 27 | Repairing/ Rewinding of Complete 75 HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 28 | Repairing/ Rewinding of Complete 85 HP KSB &others Make submersible pumping set by replacement of burnt winding and all defective parts of motor and pump (four to seven stages) and also with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 29 | Repairing/ Rewinding of Complete 100HP Kirlosker &others Make induction motor 1450 rpm by replacement of burnt winding and all defective parts of motor (rotor, bearings etc.) and disassembled / assembledalso with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 30 | Repairing of Complete 100HP Kirlosker &others Make booster pump modelDSM 125/401450 rpmby replacement ofall defective parts of motor (shaft welding ,turning replacement of glands dori, bearings etc.) and disassembled / assembledalso with painting, testing on load including cartage from site to workshop and workshop to site. ( As per requirement) |
| 31 | Supply only contactor set MNX 50 three pole L&T/Havellsmake( As per requirement) |
| 32 | Supply only contactor set MNX 80 three pole L&T/Havellsmake( As per requirement) |
| 33 | Supply only contactor set MNX 110 three pole L&T/Havellsmake( As per requirement) |
| 34 | Supply only contactor set MNX 140 three pole L&T /Havells make( As per requirement) |
| 35 | Supply only contactor set ML 6 L&T/Havellsmake( As per requirement) |
| 36 | Supply only contactor kit MNX 70 three pole L&T/Havellsmake( As per requirement) |
| 37 | Supply only contactor kit MNX 80 three pole L&T /Havells make( As per requirement) |
| 38 | Supply only contactor kit MNX 110 three pole L&T /Havells make( As per requirement) |
| 39 | Supply only contactor kit MNX 140 three pole L&T/Havellsmake( As per requirement) |
| 40 | Supply only contactor kit ML 6 L&T make ( As per requirement) |
| 41 | Supply only three core submersible cable 16 sqmm finolex make( As per requirement) |
| 42 | Supply only three core submersible cable 25 sqmm finolex make( As per requirement) |
| 43 | Supply only three core submersible cable 50 sqmm finolex make( As per requirement) |
| 44 | Supply only contactor(fixed & moving) set 125 hp starter jyoti make( Model -PITA 125) ( As per requirement) |
| 45 | Supply only auxiliary switch of 125 hp starter jyoti make( Model -PITA 125) ( As per requirement) |
| 46 | Supply only no volt coil 125 hp starter jyoti make( Model -PITA 125) ( As per requirement) |
| 47 | Repair/rewinding auto transformer125 hp starter jyoti make( Model -PITA 125) ( As per requirement) |
| 48 | Supply only transformer oil( As per requirement) |
| 49 | Supply only 4 pole,250 ampere ,415V MCCB L&T/Havells make ( As per requirement) |
| 50 | Supply only 4 pole,400 ampere ,415V MCCB L&T/Havells make ( As per requirement) |
| 51 | Labour for lifting/taking up defective submersible pumping set of any capacity (i.e. 33.3 HP to 85 HP) from under ground sump and dismantling of connected rising main i.e. NRV, Bend etc from delivery of pumping set, Lifting of column pipe size 150mm.dia fixed with pumping set, unscrewing of flange/thread column pipe from socket/ nuts & bolts, unscrewing of cable holding with clamps and disconnecting of submersible cable joint complete work associated with lifting/taking up(Approx 10m depth) of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.Rates should be quotted after deduction of all defective materials( As per requirement)of the defective submersible pumping set all as specified and directed by Engineer-in-Charge.( As per requirement) |
| 52 | Labour only for lowering/taking down tested submersible pumping set of any capacity (i.e. 33.3HP to 85 HP) in under ground sumpincluding lowering of flange/thread column pipe size 150mm.dia by screwing with socket/rubber packing nuts & bolts, fixing of cable clamp connecting of submersible cable joint complete work related to lowering/ taking down the submersible pumping set etc up to the maximum of 10 mtrs all as directed by Engineer-in-Charge. ( As per requirement) |
| 53 | Supply only 4 pole,100 ampere,415VChange over switch L&T/Havells make ( As per requirement) |
| 54 | Supply only 4 pole,200 ampere ,415V Change over switch L&T/Havells make ( As per requirement) |
| 55 | Supply only 4 pole,400 ampere ,415V Change over switch L&T/Havells make ( As per requirement) |
| 56 | Supply of star /delta starter with all protections (single phase preventer,over load protection , etc.)with digitel meter ,suitable to running up to 75 hp submersible pumping set |
| 57 | Supply of copper lugs 25mm( As per requirement) |
| 58 | Supply of copper lugs 35mm( As per requirement) |
| 59 | Supply of copper lugs 50mm( As per requirement) |
| 60 | Supply only gland dori 12mm to 50 mm ( As per requirement) |
