|
| 1 | Surface excavation n exc 30 cm deep and average 15 cm in soft/loose soil and getting out complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, orfor shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed. |
| 3 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed. |
| 4 | Removing of surplus excavated material exc 50m but n. exc 100m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed. |
| 5 | Material and labour for hardcore of gauge n exc. 63mm with brokenstone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and directed. |
| 6 | Material and labour for PCC 1:2:4 type B-0 ( using 12.50 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 7 | Material and labour for Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 8 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 9 | Material and labour for plain cement concrete 1:4:8, type D2, (using 40 mm grade stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 10 | Material and labour for reinforced cement concrete M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | All as per item no 10 above butin beams, seimic bands, cantilevers, bressumers and lintels complete. |
| 12 | All as per item no 10 above but in columns complete all as specified and as directed. |
| 13 | All as per item no 10 above but in chajjahs complete all as specified and as directed. |
| 14 | Material and labourfor PCC (1:2:4)type B1 (using 20 mm graded crushed stone aggregate) as in coping / benchingetc complete all as specified and as directed. |
| 15 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 16 | Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 and complete all as specified and directed. |
| 17 | Material and labour for brick work with sub class `B\" bricks old sized straight or curved on plan exc 6 M mean radious and built in cement mortar 1:4 etc complete all as specified and as directed. |
| 18 | Material and labour for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed. |
| 19 | Cutting chases, pinning in, in brick wallfor concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 20 | Material and labour for Granite work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 15mm bedding in CM 1:6and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed. |
| 21 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 22 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 23 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed. |
| 24 | Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 25 | Supply and fix solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 26 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on backface etc. complete all as specified and as directed. |
| 27 | Supply and fix factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 |
| 28 | Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | Supply and fix 150mm in size extruded aluminium handles, fabricated type, anodised complete all as specified and directed. |
| 30 | Supply and fix stainless steelbutt hinges 100 mm long medium weight complete all as directed. |
| 31 | Supply and fix aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 32 | Supply and fix aluminium door closer (Die-cast) bodyhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed. |
| 33 | Material and labourDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 34 | Supply and fixing anodized aluminium fixed glass window and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, etc. and including 6 mm thick toughned glass and tacks and making good to disturbed surfaces complete all as specified and as directed |
| 35 | Anodized aluminium push pull type fully glazed door shutter (single leaf / double leaf) having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick with aluminium anodized chowkats of section 63.50mmx33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc. 5.5 mm thick float glass tinted quality on top/bottom panel complete all as specified and as directed. (Note : Door closer shall be measured and paid separately) |
| 36 | Supply and fixing anodized aluminium sliding glazed window shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00mmx20.00mmx1.10mm thick and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and including 4mm thick sheet glass, tinted quality on panel and stainless steel wirecloth or aluminium anodized wire cloth for mosquito proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed |
| 37 | Material and labour for TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 38 | Allas item No 37 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 39 | Material and labour forTMT steelbars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified and directed |
| 40 | Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed |
| 41 | Supply and fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 with one shop coat of zinc chrome primer paintcomplete all as specified and as directed. |
| 42 | Material and labour compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410 -W (Gde-E- 250) quality-A |
| 43 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 44 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 45 | Material and labour for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site.The following procedures to be adopted during the execution of work :-(i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm.The layer will be allowed to air cure for 4 hours.(ii)Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm.The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(iii)20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv)Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall.(v) Cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC (depth up to 45 cm) |
| 46 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee(15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 47 | Material and labour for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) ina grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm gridall as specified and directed. |
| 48 | Material and labour for 100 mm thick plain cement concrete (1:4:8)type D2 (using 40 mm graded crushed stone aggregate) as insub base of tiles/floor of hard standing/path etc complete all as specified and directed. |
| 49 | Material and labour for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in sub base for path/paving/hard standing/floor etc. complete all as specified and as directed. |
| 50 | Material and labour for 75 mm thick cement concrete 1:4:8 type D- 2(using 40mm graded stone aggregate) asin sub base of flooing etc complete all as specified and as directed |
| 51 | Material and labour for 75mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 52 | Material and labour for glazedvitrified tiles (GVT) 8 to 9 mm thick light shadearea of each tile n exc 0.36sqm in floors, set and jointed and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 53 | Material and labour for 8 to 9 mm thick glazedvitrified tiles (GVT) light shadearea of each tile n exc 0.36sqm as in vertical surfaces such as skirting/dados etc etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 54 | Material and labour for glazed coloured ceramic tiles of size 300X450X7mm thick on vertical surfaces set, jointed and pointed in net cement slurryand pointed in white cement mixed with colour pigments to match the existing surface over 10mm thick renderingin CM 1:4 complete all as specified and directed. |
| 55 | Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 56 | Material and labour for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006of 60 mm thick, M-35 grade to match with grey cement and pigment incl 50 mm thick M Sand cushioningetc complete all as specified and as directed |
| 57 | Material and labourfor 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and fair etc complete all as directed. |
| 58 | Material and labour for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thickmixed with liquid water proofing compoundas per manufacture\"s instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : liquid Water proofing compoundwill be measured and paid separately as \"Supply only\". |
| 59 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 60 | Materials and labour for preparation of newly plastered surface of wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed. |
| 61 | Material and labour forpreparation of new plastered surface of walls and applying two coats of cement based paintover one coat of concrete primer/ alkali resitant primerall as specified and directed. |
| 62 | Material and labour fornewly plastered surfaces of wallsapplying one coat of alkali resistant primer over a coat of birla white cement putty 1 mm thick ,sanding the surfaces till smooth finish is obtained and finally applying two coats of acrylic distemper etc complete all as directed. |
| 63 | Material and labour for prepration of newly plastered surfaces of wall for application primer complete. |
| 64 | Material and labour forone coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 65 | Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colourwith silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 66 | Supply and fix 4mm thick sheet glass ofordinary quality and glazing with oil putty or wooden beading to wooden frame or steel framein squares n exc 0.50 sqm in each pane complete all as specified and as directed |
| 67 | Material and labour for preparation of new steel surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and as directed |
| 68 | Supply and fix GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 69 | Supply and fix GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 70 | Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and directed. |
| 71 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed |
| 72 | Cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed. |
| 73 | Supply and fixing rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 74 | Supply and fixing rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 75 | Supply and fix angular stop valves 15 mm dia cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 76 | Supply and fixing vitreous china wash down water closet (EWC) pan (pedestal pattern) size (540 X 365X 390 MM )white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as specified and as directed. |
| 77 | Supply and fixVitreous China SquattingPan\"Orissa pattern\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. |
| 78 | Material and labour for Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 79 | Supply and fixing PVC low level flushing cistern, pastel coloured, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe complete all as specified and as directed. |
| 80 | Supply and fixingvitreous china wash hand basin colour flat back of size 550x400mmincluding brackets, chormium plated pillar tap, waste coupling, PVC waste pipe complete all as specified and as directed. |
| 81 | Supply and fixgrating doom 125mm dia with waste hole of PTMT (Min weight 40 gms). complete all as specified and directed. |
| 82 | Supply and fix chromium plated Health faucet brass CP for 15 mm bore pipe with chromium plated pipe of 1 Mtr length complete all as specified and directed. |
| 83 | Supply and fix chromium plated soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. |
| 84 | Supply and fix chromium plated toilet paper holder complete all as specified and directed. |
| 85 | Supply and fix stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed all as specified. |
| 86 | Supply and fix fancy type long body bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed. |
| 87 | Supply and fixPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 88 | Supply and fix stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed all as specified. |
| 89 | Supply and fix tubular towel ringwith brass chromium platedbrackets all as specified and directed including brackets complete all as specified and directed. |
| 90 | Supply and fix Tubular Towel Rail of 20mm dia of 60cm in length, D shaped, with brass chromium platedbrackets all as specified and directed.including brackets complete all as specified and directed. |
| 91 | Supply and fix CI floor trap100mm outlet, with grating including jointing to waste pipe fixed in cement contrete type B1 (1:2:4) complete all as specified and directed. |
| 92 | Supply and fix 75 mm dia PVC ( SWR) floor trap with dome type grating including jointing with solvant etc complete all as specified and directed. |
| 93 | Supply and fix 150mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring jointslaid in trenches or in floors et ccomplete all as specified and directed |
| 94 | Supply and fix PVC (SWR) pipe 110 mm bore single socketed in any length with adhesivejoint fixed to laid in trenches or floor/wall including ms clamps complete as specified complete all as specified. |
| 95 | PVC (SWR) bends/shoe of any radius for 110 mm bore complete all as specified. |
| 96 | Supply and fix PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete as specified complete all as specified. |
| 97 | Supply and fix PVC (SWR) vent cowl for110 mmbore pipe complete as specified complete all as specified. |
| 98 | PVC (SWR) bends/shoe of any radius for 75 mm bore complete as specified complete all as specified. |
| 99 | Supply and fix bevelled edge looking mirror 5 mm thick of size 600x450 selected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer all as specified and directed. |
| 100 | Supply and fixglass shelf of size 450x150mm size with CP guard rail below mirror for keeping soap box etc equivalent, complete all as specified and directed. |
| 101 | Material and labour for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 150 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregatecomplete all as specified and directed. |
| 102 | Supply and fix SGSW pipes 150 mm bore single socketed, in any lengthwith rubber ring joints, laid in trenches or in floorsand jointed complete all as specified and directed. |
| 103 | Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 104 | RCC septic tank capacity upto 50 users designed to carry sewage and sullage water excavation of any type of soil PCC 1:4:8 below foundation, RCC Nominal mix Type A-1 (1:1:5:3) with using 20 mm graded stone aggregates) in walls,Base slab,baffle wall and roof slab including beams etc with vent shaft manhole opening with cover connection etc.complete with effective depth of 1.5 meter and overall depth of 3.0 meter |
| 105 | Soakage well excavation 1.2 dia x 3.0 meter effective depth , in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of RCC Nominal mix Type A-1 (1:1:5:3) with using 20 mm graded stone aggregates) including intercepting chamber and screen chamber made of brick masonry in CM , RCC cover slab in SFRC cover , interconneting pipes of RCC/DWC complete with filled with brick bat of sizecomplete all as specified and directed. |
| 106 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of RCC 1:1:5:3 type A-1 (Using 20 mm graded stone aggregates) including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth complete all as specified and directed. |
| 107 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surfacefor mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed.. |
| 108 | All as per item serial No 1107 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches |
| 109 | All as per item serial No 107 here-in-before but One socket outlet 3 pin 6 Amp on independent board. |
| 110 | All as per item serial No 107 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 111 | Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and directed. |
| 112 | Supply and fixmodular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 113 | Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 114 | Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 115 | Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 116 | Supply and fixlamp holder ,PVC/Polycarbonate type with back plate suitablefor batten fittings complete all as specified and directed. |
| 117 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 118 | Supply and fixing LED light fittingwith high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 119 | Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 120 | Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 121 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 122 | Supply & fix MCB DB of sheet metal enclosure double door IP-43 SPN 8 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 123 | Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 124 | Supply and fixMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 125 | Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 126 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 127 | Supply and fix LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 128 | Material and labour forbuilding secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 129 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 130 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 corecomplete all as specified and directed. |
| 131 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 132 | Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified |
