|
| 1 | Boring |
| 2 | Transportation of RIG machine, Air compressor, O.P. Unit, drilling equipment, T& P Above Erection & Dismantling after completion of work including water arrangement etc. |
| 3 | Rate for Drilling |
| 4 | Drilling of 675mm. Dia by D.C. Rig Machine From G.L to 65m B.G.L. |
| 5 | Drilling of 450mm. Dia by D.C. Rig Machine From 65m to 210m B.G.L. |
| 6 | Rate for Tubeweel liner assembly (ERW Pipe) Prakash Surya/JINDAL/TATA/SAIL Make) |
| 7 | Housing pipe 350mm dia 8mm thick |
| 8 | Slotted pipe 200mm dia 8mm thick |
| 9 | Blind Pipe 200mm dia 8mm thick |
| 10 | Lowering of Tubewell Assembly |
| 11 | Supply & Filling gravel of 1.5 to 4 .5mm size surrounding the tubewell (Lalkuawan Quary) |
| 12 | Development of tubewell by air compressor of 350PSI 500 CFM |
| 13 | Development of tubewell by O.P. Unit.by 3.5 to 4.5 Cusec Capacity OP Unit |
| 14 | Providing and fixing of required tubewell accessories as Following |
| 15 | M.S. Reducer 350 x 200 mm Dia 8mm Thick |
| 16 | M.S. Socket/Ring 350 mm Dia 8mm Thick |
| 17 | M.S. Socket/Ring 200 mm Dia 8mm Thick |
| 18 | M.S. Housing Clamp Heavy Duty 350 mm Dia with Tubewell Support Channel |
| 19 | M.S. Bail Plug 200mm Dia |
| 20 | M.S. Well Cap 350mm Dia |
| 21 | Supply & provindig Bantonite powder if required while drilling of bore hole. |
| 22 | Tubewell loging of bore by Electrical logger. |
| 23 | Pumping plant |
| 24 | Pumping Plant:- Supply of KSB Make Submersible pumpset complete in all respect suitable for 1200 LPM at 60 mtr head including submersible cable Complete in all respects as per direction of E/I. 01 Set |
| 25 | Switchgear (ITEM No. 1):- Supply Cubical dust & vermin proof switch board panel wall mounting type And comprising fo the following and complete with internal wiring. a) 100 Amp. TPN Switch Fuse Unit panel mounted type in open execution complete with HRC fuses and of make Siemens/L&T/Crompton of suitable size. 1 No. b) Voltmeter flush mounting type 500 V in 100 mm dial and of reputed make with Voltmeter Selector Switch.1 No.c) Ampere meter flush mounting type of suitable range and of reputed make. 1 No.d) Indicating Lamps Set of 3 Nos. 1 Set.e) Toggle Switches Set of 3 Nos. 1 Set.f) Instrument fuses Set of 3 Nos. 1 Set.g) Single Phasing Preventor 1 No.h) Power Capacitor Asian/GE/Siemens make of suitable capacity. 1 No.i) Submersible Cable of suitable size for connection from motor to starter Suitable length 1 No. |
| 26 | Supply and burring of Safe Earthing Electrode T-39 ( Hot Dip Galvanized) Length up to 3000mm, outer Dia 50mm inner 25mm, terminal Dia 12mm, outer G.I. Pipe of 16 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity & one earthing lead of 25 x 3mm G.I. Strip, up to switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. As per PWD SOR-2018 S.I. No.-725 (B)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified |
| 27 | Danger board |
| 28 | MAIN PIPING & VALVES |
| 29 | C.I.D.F. bends 90 degree for 150 mm dia |
| 30 | C.l.D.F. siuice valve 150 mm dia with Hand wheel (Make kirloskar/I.V.C) |
| 31 | C.l.D.F. Non return valve 150 mm dia |
| 32 | MSDF Pipe 150 mm dia 1.50 mtr long |
| 33 | MSDF Pipe 150 mm dia 1.00 mtr long |
| 34 | C.I.D.F. Tee for 150.mm.dia. |
| 35 | M.S.D.F. pipe 150 mm dia colum for M.S. Pipe 3 Mtr Long |
| 36 | MS Clamp 150mm Dia |
| 37 | Nut, bolt and washer |
| 38 | Cutting of housing cover |
| 39 | Safty guard/ crossing ring |
| 40 | Painting of Pumping Plant |
| 41 | All parts of the motors, pump, switchgear accessories, piping and Other iron or steel work not finished bright shall filled and painted With three coats of approved oil paint coat which shall be applied on after erection. |
| 42 | PRESSURE & DEPTH |
| 43 | 100 mm dia pressure gauge H-GURU big make 1 Nos. |
| 44 | 100 mm dia depth gauge H-GURU big make 1 Nos. |
| 45 | 6 mm airline of suitable length with stop cock union nipple, elbows etc. complete |
| 46 | IV 6 mm pipe with union nipple etc for connecting the guage Boards |
| 47 | Teak Wood boards for mounting gauges |
| 48 | LIFITING TACKLE |
| 49 | Chainpully block 3 Ton capacity with 4 mtr.Lift of Indef/Reva make |
| 50 | SPECIAL TOOLS AND SPANNERS |
| 51 | D.E. Spanner Set (6 pcs.) (Gedore/Taparia/Everest make) 1 Set. |
| 52 | Pipe Wrench 350 mm (Gedore/Taparia/Everest make) 1 No. |
| 53 | Screw Drivers 12\"\" size (Gedore/Taparia/Everest make) 1 No. |
| 54 | Screw Drivers 6\"\" size (Gedore/Taparia/Everest make) 1 No. |
| 55 | Insulated Plier (Gedore/Taparia/Everest make) 1 No. |
| 56 | Hand Air Pump 1 No. |
| 57 | Hammer with Handle 1 No. |
| 58 | 20mm thick Tool Board make of Teak Wood with sunmica top of 450x600mm size 1 No. |
| 59 | Errection Charges of Pumping Plant |
| 60 | Testing & Commissioning of Pumping Plant |
| 61 | Running Period 1 Month |
| 62 | Supply of Electronic Chlorinator of 6 LPH Capacity complete with accessories and PVC Solution Tank Aquas Make |
| 63 | Supply of Orifice Plate (150 MM DIA) |
| 64 | Supply of Sodium Hypochlorite (70 Ltr. Drum) |
| 65 | Installation Charges |
| 66 | Cartage |
| 67 | External Electrification |
| 68 | Supply and Erection of Double Pole (Bottom Portion Galvanised) 11 Mtr. long 410 SP-55 S.T. pole support duly grouted, plinthed , plastered & painted in the same manner as already specified for respective supports suitable for pole mounted type substation with different types of M.S. channels and angle iron duly fabricated for Disc fittings TPMO, D.O. fuse, outside dropper & bracings including cost of material, labour and T&P required for proper completion of work as per drawing and direction of E/I. |
| 69 | S/F of 11 KV TPMO set complete with all material, labour, T&P etc. required for proper completion of the work. |
| 70 | S/E of 11 KV D.O. fuse set complete with all material, labour, T&P etc. required for proper completion of work. |
| 71 | Supply, Installation, Testing and Commissioning of 11/.433 KV, 63 KVA (EE Level-1) Transformer of following capacity including Loading, unloading, local carriage with all material, labour, T&P required for proper completion of the work. - |
| 72 | S/F of H.T/L.T jumpering and connection on double pole/four pole. lightening arrestors & T/F including cost of all material, labour T & P etc. required for proper completion of work. |
| 73 | S/F of lightening arrestor set (3 Nos.) suitable for mounting on steel supports complete with all materials, labour and T & P required of proper completion of work as per direction of E/I. Annex- |
| 74 | S/F of following GI pipe \"B\" class for cable duly clamped with supports by 3 nos. with clamps of 20x3mm M.S. flat bolts nuts & washers required for proper completion of work. |
| 75 | 100 mm Dia (10.20Kg /Mtr.) |
| 76 | Supply and burring of Safe Earthing Electrode T-39 ( Hot Dip Galvanized) Length up to 3000mm, outer Dia 50mm inner 25mm, terminal Dia 12mm, outer G.I. Pipe of 16 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity & one earthing lead of 25 x 3mm G.I. Strip, up to switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. As per PWD SOR-2018 S.I. No.-725 (B)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified |
| 77 | Supply and Laying of XLPE cable 11 KV grade at a depth of 1.20 Mtrs below GL over a cushion of 75mm thick sand alround protected with bricks on sides and top on surface the cable run shall be fixed on M.S. Clamp etc. of suitable size and arossing the road cable shall run through 150mm dia hume pipe size of G.S. wire 7/10 SWG clipped at several places as directed by E/I for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamps etc. of following sizes (as per specfication-28) |
| 78 | 3x120 sqmm As per PWD SOR-2018 S.I. No.-506 (f) |
| 79 | S/F and jointing of 120 Sqmm out door Type Jointing kit (Make Raychem/Densons/3M) As per DSR-2022 S.No. 10.5.2 |
| 80 | Supply & Laying of Al. conductor PVC insulated armoured served sheathed cable 1100V grade at a depth of 75cm below GL over a cushion of 75mm thick sand alround & protected with bricks on side on top. On surface the cable sun shall be fixed on M.S clamps of suitable size or as directed by the E/I, complete in all respect. The Armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 81 | 70 sqmm 3.5 core (PWD SOR-2018 SI No. 501(m) |
| 82 | Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects (as per PWD SOR 2018 SI No. 504). |
| 83 | 35 Sqmm |
| 84 | 70 Sqmm |
| 85 | Supply & Fixing of Wooden Meter Board. As per latest guidelines of UPPCL. |
| 86 | Supply & Fixing of 200 Amp. Kit-Kat fuse unit. |
| 87 | Neutral Link 100 Amp. Please Enable Macros to View BoQ information |
