Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | STANDARD BIDDING DOCumENT FOR PROCUREMENT OF WORKS Canal Water Based Water Supply Project for Construction of 3.0 MLD Water Treatment Plant (WTP) and other related works including 5 years’ Operation and Maintenance at Mudki Town, District Ferozepur, Punjab under AMRUT 2.0 Scheme Volume - 3 Project Value: Capital cost: Rs. 1371.67 Lakh 5 Years\" O&M: Rs. 318.44 Lakh Price Bid Febuary, 2025 NIT No.: Date: Name of Work: Canal Water Based Water Supply Project for Construction of 3.0 MLD Water Treatment Plant (WTP) and other related works including 5 years’ Operation and Maintenance at Mudki Town, District Ferozepur, Punjab under AMRUT 2.0 Scheme Name of Bidder: |
| 2 | Part-2: Construction of 3.0 MLD Water Treatment Plant (WTP) and other related works |
| 3 | 5 Years\" Operation and Maintenance Estimate Amount (1+2 ) (In Rs): 169011487.76 Enter Rate below without (+), (-) and (%) symbols For \"At Par\" Rate, Enter Zero. Percentage Above/Below/At Par Select % 1690.1148776000005 Amount as per percentage quoted, Percentage Rate (1+2) (Amount in Rs) 0.0 Amount In Words No Rupees and No Paise Provisional Sum (Not part of bidding) Rs in Lakh = 328.1865260455344 2018.3014036455347 141.40713 2159.7085336455348 Name of Work: Canal Water Based Water Supply Project for Construction of 3.0 MLD Water Treatment Plant (WTP) and other related works including 5 years’ Operation and Maintenance at Mudki Town, District Ferozepur, Punjab under AMRUT 2.0 Scheme Details Summary WTP Part-2 S.No Particulars Total Amount (Rs) Capital Works: Percentage Rate I ) Civil works : |
| 4 | Canal Intake : i) RCC Valve Chamber near Canal 226856.24 ii) Rising main from Valve chamber to Concrete Channel 162367.84 iii) Raw Water Concrete Channel 346673.88 iv) RWR Intake Well & Pumping machinery room, Panel room and Meter room 1267776.78 v) RWR Panel Room ( 4.0 x 4.25 x 4.0 m) and Meter room ( 4.25 x 2.50 x 4.0 m) 1201754.21 vi) Boundary wall with Wire fencing at Intake Pumping Station 488824.07999999996 |
| 5 | Raw Water Transmission main : i) Raw water transmission main : DI K-7 50438933.92000001 ii) Minor Crossing 5 Mtr Wide 138519.49000000002 iii) Minor Crossing 10 Mtr Wide 1335222.3400000005 iv) Canal Crossing 1680808.0599999998 v) Road Cutting (Mandi Board & National Highway) 252557.0 |
| 6 | Raw water S & S Tank : i) Raw Water Storage and Sedimentation (S &S ) Tank with Ramp 20606969.699999996 ii) Raw Water Inlet Chamber to S & S Tank - I 199085.80999999997 iii) Raw Water Inlet Chamber to S & S Tank - II 160071.56 iv) Raw Water Outlet Valve Chamber 319322.54 v) Construction of supporting RCC columns for Solar Panel 1122850.0 |
| 7 | Raw water sump and Pumping station : i) Raw water sump 1083473.0 ii) Pumping machinery,Panel room & Store room 1148927.0 |
| 8 | Water Treatment Plant : i) Capacity : 3 MLD (22 Hrs @136.25 KLH) 13137000.0 |
| 9 | Chlorine Contact tank : i) Chlorine Mixing Chamber 347406.0 ii) Valve Chamber 349532.0 iii) Chlorine Contact tank 1286613.0 |
| 10 | Clear Water Reservoir : ( CWR ) i) Clear Water Reservoir with Compartment 5370060.0 ii) CWR Sump and Pumping station,Panel Room : 1348198.6399999997 |
| 11 | Clear Water Transmission Main : DI K-7, i) Clear water transmission main : DI K-7 2070851.46 ii) Minor Crossing 10m wide with Encasement 77217.03000000001 |
| 12 | Distribution line within WTP premises |
| 13 | WTP boundary wall PART A : Civil works +WTP 109546564.76000004 II ) Mechanical Works : |
| 14 | Raw water pump : Intake well to S & S Reservoir |
| 15 | Raw water pump :S&S Reservoir to WTP |
| 16 | Dewatering Pumps: In S&S Reservoir |
| 17 | Clear water pump : Clear water Reservoir to OHSR B PART B : Mechanical works 11440674.0 III ) Electrical,Instrumentation & SCADA works : |
| 18 | Intake Pumping Station |
| 19 | Raw Water Pumping Station |
| 20 | Clear Water Pumping Station |
| 21 | Sub-Station for Raw & Clear water Pumping Station and WTP |
| 22 | SCADA for Intake, Raw Water & Clear Water Pumping Station, WTP & Sub-Station C PART C : ( Rs.) Electrical, Instrumentation & SCADA Works 16180041.0 Estimate Amount (Part A, B & C,) (In Rs): 137167279.76000005 D PART D : 5 Years\" Operation and Maintenance 31844208.0 E Provisional Sum (Not part of bidding) (Rs in Lakhs) (a) Provisional Sum (Capital Cost) Rs in Lakhs : 219.5502154349454 (b) PWSSB Charges and Cess,Rs in Lakhs : 108.63631061058898 Total Provisional Cost Rs in Lakhs (Not part of bidding) 328.1865260455344 Canal Water Based Water Supply Project for Construction of 3.0 MLD Water Treatment Plant (WTP) and other related works including 5 years’ Operation and Maintenance at Mudki Town, District Ferozepur, Punjab under AMRUT 2.0 Scheme Provisional Sum S.no. Description Unit Qty Cost (Rs in Lakh) (A) Provisional Sum (Capital Cost) : |
| 23 | Price Escalation = 3.75 % of Capital Cost ( @ 7.50 % per anum and average 3.75% per year) |
| 24 | Contingencies = 4 % of Capital Cost (L.S) |
| 25 | B & R deposit |
| 26 | Shifting of Utilities ( Electric Poles,W/S.and Sewerage Pipeline,Other Service Utilities) |
| 27 | Permission for BT bill : |
| 28 | Forest dept. |
| 29 | Mandi Board: Road Restoration: |
| 30 | W.R.D. deposit work charges for providing Raw Water and Construction of Cross regulator if there is no existing cross regulator. |
| 31 | National Highway (NH) |
| 32 | NH : Road Restoration: |
| 33 | Electrical connections charges : |
| 34 | Intake Pumping station |
| 35 | Sub Station Sub Total (A) Provisional Sum 219.5502154349454 |
| 36 | (B) PWSSB Charges and Cess : a Contingencies Charges on work @ 1% ( To be paid on actual limited to maximum @ 1% of Capital cost) 0.01 13.716705885175378 b PWSSB Charges @ 6 % on Capital Cost 0.06 82.30023531105226 c Third Party Inspection Charges @ 0.92% 0.0092 12.619369414361346 Sub Total (B) PWSSB Charges and Cess 108.63631061058898 Total : Provisional Sum (Not part of bidding) Rs in Lakh 328.1865260455344 RCC Valve Chamber near Canal Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 37 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) Extra depth excavation : > 1.50 m. |
| 38 | 6.19 Rate for loading : 4.1 (A ) Stone (building or pitching),Sand,Earth,Fly Ash,Bajri,Shingle,Spalls,Brick bats,Brick ballast and Stone metal. |
| 39 | Carriage of Earth : 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 40 | 2 nd and 3 rd chain,per chain of 30 meters. |
| 41 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 42 | CC 1:2:4 : |
| 43 | 10.13 a (ii) M-30 : |
| 44 | 10.17 Shuttering : |
| 45 | 9.1 C / shuttering : |
| 46 | 9.2 C / shuttering : |
| 47 | 9.8 Steel : |
| 48 | 18.18 PVC Foot Steps : |
| 49 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 50 | ii Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 51 | (e ) D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 52 | f CI-D Joint : 28.1 Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete |
| 53 | e GI Pipe : ( Rising pipe for Valve Operation) 28.35 Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete. |
| 54 | b Diff.in Rates of Materials : |
| 55 | From Mirthal |
| 56 | From Lohand Khad |
| 57 | From Ferozpur |
| 58 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 59 | From Mirthal 204 km |
| 60 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 189327.24 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 10129.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 199456.24 1.Capital Works \" NON CSR based Items Puddle Collar : NSRUIDP SOR 2022-23Code No. 19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer |
| 61 | 19.63.6 Capital Works \" NON CSR based Items ( In Rs) 27400.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 199456.24 Non - CSR based amount ( In Rs) 27400.0 Total : CSR + Non CSR Amount : ( Rs) 226856.24 Rising Main up to Raw Water Channel Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : ( Manually) 28.1 Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earthwork upto 1.50 mt.Depth. i All classes of soil except rocky Cum 30.06 169.03 One Hundred Sixty Nine Rupees and Three Paise 5081.04 Excavation : (Mech.) 28.2 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earthwork upto 1.50 mt.Depth. |
| 62 | i DI K-7 Pipes : 28.7 B Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,cost of rubber ring. A DI pipe as per IS 8329 DI-K7 |
| 63 | (e) DI Specials : 28.25 Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects. |
| 64 | a Capital Works \" CSR based Items ( In Rs) 154121.84 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 8246.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 162367.84 Total : CSR Amount : ( Rs) 162367.84 Rising Main up to Raw Water Channel Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 65 | i Extra depth : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) Extra depth excavation : |
| 66 | 6.19 Loading : |
| 67 | 4.1 ( A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 68 | 2 nd and 3 rd chain,per chain of 30 meters |
| 69 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 70 | CC.1:2:4 : |
| 71 | 10.13 a (ii) M-30 : |
| 72 | 10.17 Shuttering : ( Raft foundation) |
| 73 | 9.1 C / shuttering : ( Walls) |
| 74 | 9.2 C /shuttering : (Platform slab for operation of Manual screen) |
| 75 | 9.8 Steel : |
| 76 | 18.18 Safety foot rest : |
| 77 | 29.35 MS Railing for Operation platform Bar screen : |
| 78 | 18.3 Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 79 | (d ) D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. Pipe lines laid complete. |
| 80 | e CI-D Joint : 28.1 Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete |
| 81 | d GI Pipe : ( Rising Pipe for Valve Operation) 28.35 Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete. |
| 82 | b Diff. Rates of materials : |
| 83 | From Mirthal |
| 84 | From Lohand Khad |
| 85 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 86 | From Mirthal 204 km |
| 87 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 308944.88 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 16529.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 325473.88 1.Capital Works \" NON CSR based Items Puddle Collar : NSRUIDP SOR 2022-23 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer |
| 88 | 19.63.7 Capital Works \" NON CSR based Items ( In Rs) 21200.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 325473.88 Non - CSR based amount ( In Rs) 21200.0 Total : CSR + Non CSR Amount : ( Rs) 346673.88 RWR Intake well & Pumping Machinery room, Panel room & Meter room Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 89 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 90 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 91 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 92 | 2 nd and 3 rd chain,per chain of 30 meters |
| 93 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 94 | C.C. 1:2:4 : |
| 95 | 10.13 a (ii) M-30 : Plinth level |
| 96 | 10.17 M-30 : Plinth level > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. M-30 : > 4.0 m |
| 97 | Shuttering : ( Raft foundation) |
| 98 | 9.1 C / Shuttering : ( Walls) |
| 99 | 9.2 C / Shuttering > 4.0 m.height : ( Walls) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. Sqm |
| 100 | C / Shuttering : (Columns) |
| 101 | 9.4 C / Shuttering > 4.0 m.height : ( Columns) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. Sqm C / Shuttering > 4.0 m.height : ( Columns) |
| 102 | C / Shuttering : (Slab) |
| 103 | 9.8 Steel : |
| 104 | 18.18 PVC Foot Steps : |
| 105 | 29.35 Note : PVC foot Steps are provided at ( 1+1=2) locations RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 106 | ii Diff.rates of materials : |
| 107 | From Mirthal |
| 108 | From Lohand Khad |
| 109 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 110 | From Mirthal 204 km |
| 111 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 1203394.78 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 64382.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1267776.78 Pumping Machinery Room,Panel and Meter Room Combined Brick masonary work (1:5) : ( H = 4.0 m) |
| 112 | 11.6 Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m ) 11.29 b Extra for work above 4 meters ( where any single storey exceeds 4 meters in height 0 for every additional height of 2 meters or part thereof for Brick Work / concrete Block / Clay Block Cum |
| 113 | CC 1:2:4 : |
| 114 | 10.13 a (ii) DPC : |
| 115 | 10.26 M-30 : |
| 116 | 10.22 |
| 117 | Steel : |
| 118 | 18.18 C / Shuttering : (Columns) |
| 119 | 9.4 C / Shuttering > 4.0 m.height : ( Columns) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. |
| 120 | C/shuttering : 9.8 Centering and Shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. C / Shuttering > 4.0 m.height : |
| 121 | C/shuttering : ( Lintels) |
| 122 | 9.6 CP 12.5 mm.thk. : (1:4) |
| 123 | 15.9 CP 12.5 mm.thk. : (1:2) |
| 124 | 15.7 White washing : |
| 125 | 16.3 Preparation of plastered surface : |
| 126 | 16.6 Distempering : |
| 127 | 16.7 Oil Bound Distemper : |
| 128 | 16.1 Earth filling under floors : |
| 129 | 6.8 / (a) / (ii) Ironite flooring: |
| 130 | 14.4 CC 1:4:8 Base for Ironite flooring: |
| 131 | 10.11 a (ii) Steel windows and Ventilators : 18.2 Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer. |
| 132 | (b) Fixing : |
| 133 | 18.23 Glass panes : 18.25 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. |
| 134 | (a) Doors Shutter : 17.17 (i) Kail wood doors shutter and window shutter panelled,galzed or glazed and panelled,including hinges,screws,chokes,cleats and cords etc. complete fixed in position.(Single Leaf) |
| 135 | (a) Aluminium Fittings : 17.23 Cost of Aluminium fittings complete for doors,windows such as tower bolts,handles,Stoppers and screw etc.for these fittings.(Excluding sliding bolt) |
| 136 | (ii) Steel Chowkats : 18.24 Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. |
| 137 | (c) Rolling Shutter : |
| 138 | 18.11 (a) Parapet Wall : |
| 139 | 11.36 CC 1:2:4 : ( Coping ) |
| 140 | 10.13 a (ii) CC gola : |
| 141 | 13.55 Top Khurra : |
| 142 | 13.45 Bottom Khurra : |
| 143 | 13.51 Drip Course : |
| 144 | 11.42 Dry Brick edge paving : |
| 145 | 14.18 CI Rain water pipes : |
| 146 | 13.41 CI head : |
| 147 | 13.42 CI shoes : |
| 148 | 13.43 Embedding of CI Rain water pipes : |
| 149 | 13.44 Estimation for Meter Room Above GL Excavation : 6.7 Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around |
| 150 | (a) CC 1:2:4 : |
| 151 | 10.13 a (ii) M-30 : Plinth level |
| 152 | 10.17 Steel : |
| 153 | 18.18 Brick Masonary work in cm 1:5 : (plinth level) |
| 154 | 11.5 Difference rates of materials : |
| 155 | From Mirthal |
| 156 | From Lohand Khad |
| 157 | From Ferozpur |
| 158 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 159 | From Mirthal 204 km |
| 160 | From Lohand Khad 209 km |
| 161 | Capital Works \" CSR based Items ( In Rs) 1140725.21 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 61029.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1201754.21 Total : CSR Amount : ( Rs) 1201754.21 Intake Boundary wall Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : |
| 162 | 6.19 CC 1:2:4 : |
| 163 | 10.13 a (ii) M-30 : |
| 164 | 10.17 Steel : |
| 165 | 18.18 Shuttering : |
| 166 | 9.1 C / shuttering : ( Columns) |
| 167 | 9.4 C / shuttering : ( Beams) |
| 168 | 9.6 115 mm.thk.BBM : |
| 169 | 11.36 CP 20 mm.thk. : |
| 170 | 15.2 White wash : |
| 171 | 16.3 Dry distemper : |
| 172 | 16.7 Sliding Shutters : |
| 173 | 18.9 1.2 Meter High G.I.Barbed Wire fencing Diff.in Rates of materials : |
| 174 | From Mirthal |
| 175 | From Lohand Khad |
| 176 | From Ferozpur |
| 177 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 178 | From Mirthal 192 km |
| 179 | From Lohand Khad 199 km Capital Works \" CSR based Items ( In Rs) 445661.07999999996 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 23843.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 469504.07999999996 1.Capital Works \" NON CSR based Items |
| 180 | (Rate analysis based on CSR ) Capital Works \" NON CSR based Items ( In Rs) 19320.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 469504.07999999996 Non - CSR based amount ( In Rs) 19320.0 Total : CSR + Non CSR Amount : ( Rs) 488824.07999999996 Raw Water Transmission DI K7 Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) Excavation : ( Manually) 28.1 Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earthwork upto 1.50 mt.Depth. |
| 181 | i Excavation : (Mech.) 28.2 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earthwork upto 1.50 mt.Depth. |
| 182 | i DI K-7 Pipes : 28.7 B Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,cost of rubber ring. A DI pipe as per IS 8329 DI-K7 |
| 183 | (e) DI Specials : 28.25 Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects. |
| 184 | a Scour Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 185 | (b ) D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 186 | b Valve chambers : 28.66 Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. |
| 187 | a Difference rates of materials : |
| 188 | From Mirthal |
| 189 | From Lohand Khad |
| 190 | From Ferozpur |
| 191 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 192 | From Mirthal 204 km |
| 193 | From Lohand Khad 209 km |
| 194 | Capital Works \" CSR based Items ( In Rs) 47565361.92000001 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 2544747.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 50110108.92000001 1.Capital Works \" NON CSR based Items Air Valve : NS Based on PHED Rajasthan 2023Code no.6.6 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide-HBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 6.6.1 Class PN 1.0 |
| 195 | 6.6.1.1 Capital Works \" NON CSR based Items ( In Rs) 328825.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 50110108.92000001 Non - CSR based amount ( In Rs) 328825.0 Total : CSR + Non CSR Amount : ( Rs) 50438933.92000001 Minor Crossing 5m wide Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : ( Manually) 28.1 Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earthwork upto 1.50 mt.Depth. |
| 196 | i Excavation : (Mech.) 28.2 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earthwork upto 1.50 mt.Depth. |
| 197 | i M-20 : |
| 198 | 10.17 C / shuttering : |
| 199 | 9.5 Steel : |
| 200 | 18.18 Diff.in Rates of Materials : |
| 201 | From Mirthal |
| 202 | From Lohand Khad |
| 203 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 204 | From Mirthal 204 km |
| 205 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 131485.49000000002 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 7034.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 138519.49000000002 Total : CSR Amount : ( Rs) 138519.49000000002 Minor Crossing 20m (02 nos) wide with Encasement -CWR Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : |
| 206 | 6.19 CC 1:2:4 : |
| 207 | 10.13 a (ii) M-30 : |
| 208 | 10.17 Steel : |
| 209 | 18.18 Shuttering : |
| 210 | 9.1 C / shuttering : ( Columns) |
| 211 | 16.17 Diff.in Rates of materials : |
| 212 | From Mirthal |
| 213 | From Lohand Khad |
| 214 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 215 | From Mirthal 204 km |
| 216 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 1267415.3400000005 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 67807.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1335222.3400000005 Total : CSR Amount : ( Rs) 1335222.3400000005 Canal Crossing Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items |
| 217 | 16.17 Excavation : |
| 218 | 6.19 CC 1:2:4 : |
| 219 | 10.13 a (ii) Shuttering : |
| 220 | 9.1 Diff.in Rates of materials : |
| 221 | From Mirthal |
| 222 | From Lohand Khad |
| 223 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 224 | From Mirthal 204 km |
| 225 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 1595451.0599999998 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 85357.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1680808.0599999998 Total : CSR Amount : ( Rs) 1680808.0599999998 Road Cutting (B&R-Road Type -BT& IL) Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Flexible pavements : |
| 226 | 24.3 (a) Concrete : |
| 227 | 8.6 (a) Dry Brick : |
| 228 | 8.19 IL : |
| 229 | 8.43 Capital Works \" CSR based Items ( In Rs) 239731.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 12826.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 252557.0 Total : CSR Amount : ( Rs) 252557.0 Raw Water Storage and Sedimentation (S &S ) Tank with Ramp Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 230 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 231 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 232 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 233 | 2 nd and 3 rd chain,per chain of 30 meters |
| 234 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 235 | C.C. 1:2:4 : |
| 236 | 10.13 a (ii) M-30 : |
| 237 | 10.17 M-30 : > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 238 | Shuttering : ( Raft foundation - S & S tank) |
| 239 | 9.1 C / Shuttering : ( Walls - S & S tank) |
| 240 | 9.2 C / Shuttering > 4.0 m.height : ( Walls - S & S tank) ( 4.0 - 5.0 m) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height for every additional height of 1 metres or part thereof. |
| 241 | Steel : |
| 242 | 18.18 PVC Foot Steps : |
| 243 | 29.35 C / Shuttering : (Columns - Ramp) |
| 244 | C / Shuttering : (Columns - Ramp) |
| 245 | 9.4 C / Shuttering : (Beam) |
| 246 | 9.6 C / Shuttering : (Slab - Ramp) |
| 247 | 9.8 Sliding Shutters : ( At Ramp Approach) |
| 248 | 18.9 Difference in Rates of materials : |
| 249 | From Mirthal |
| 250 | From Lohand Khad |
| 251 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 252 | From Mirthal 204 km |
| 253 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 19560483.699999996 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 1046486.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 20606969.699999996 Total : CSR Amount : ( Rs) 20606969.699999996 Raw Water Inlet Chamber to S & S Tank-I Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork in excavation : (Mechanically) 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 254 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 255 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 256 | 4.1 (A) C.C. 1:2:4 : |
| 257 | 10.13 a (ii) M-30 : (plinth) |
| 258 | 10.17 Shuttering : |
| 259 | 9.1 C / Shuttering : ( walls) |
| 260 | 9.2 C / Shuttering : ( slab) |
| 261 | 9.8 Steel : |
| 262 | 18.18 PVC Foot Steps : |
| 263 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 264 | ii Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 265 | (e ) CI-D Joint : 28.1 Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete |
| 266 | e D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. Pipe lines laid complete. mm.i/d. |
| 267 | f GI Pipe : ( Rising Spindle for Valve Operation) 28.35 Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete. mm.i/d. |
| 268 | b Diff.rates of materials : |
| 269 | From Mirthal |
| 270 | From Lohand Khad |
| 271 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 272 | From Mirthal 204 km |
| 273 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 162966.80999999997 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 8719.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 171685.80999999997 1.Capital Works \" NON CSR based Items Puddle Collar : NSRUIDP SOR 2022-23Code No. 19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer |
| 274 | 19.63.6 Capital Works \" NON CSR based Items ( In Rs) 27400.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 171685.80999999997 Non - CSR based amount ( In Rs) 27400.0 Total : CSR + Non CSR Amount : ( Rs) 199085.80999999997 Raw Water Inlet Chamber to S & S Tank-II Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 275 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 276 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 277 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 278 | 2 nd and 3 rd chain,per chain of 30 meters |
| 279 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 280 | C.C. 1:2:4 : |
| 281 | 10.13 a (ii) M-30 : (plinth) |
| 282 | 10.17 Shuttering : |
| 283 | 9.1 C / Shuttering : ( walls) |
| 284 | 9.2 C / Shuttering : ( slab) |
| 285 | 9.8 Steel : |
| 286 | 18.18 PVC Foot Steps : |
| 287 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 288 | ii Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 289 | (e ) CI-D Joint : 28.1 Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete |
| 290 | e D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. Pipe lines laid complete. |
| 291 | f GI Pipe : ( Rising Spindle for Valve Operation) |
| 292 | b Diff.rates of materials : |
| 293 | From Mirthal |
| 294 | From Lohand Khad |
| 295 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 296 | From Mirthal 204 km |
| 297 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 125934.55999999998 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 6737.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 132671.56 1.Capital Works \" NON CSR based Items Puddle Collar : RUIDP SOR 2022-23Code No. 19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer |
| 298 | 19.63.6 Capital Works \" NON CSR based Items ( In Rs) 27400.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 132671.56 Non - CSR based amount ( In Rs) 27400.0 Total : CSR + Non CSR Amount : ( Rs) 160071.56 Raw Water Outlet Valve Chamber Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork in excavation : (Mechanically) 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 299 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 300 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 301 | 4.1 (A) C.C. 1:2:4 : |
| 302 | 10.13 a (ii) M-30 : |
| 303 | 10.17 M-30 : > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 304 | Shuttering : |
| 305 | 9.1 C / Shuttering : ( walls) |
| 306 | 9.2 C / Shuttering > 4.0 m 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 meters or part thereof. |
| 307 | C / Shuttering : ( slab) |
| 308 | 18.18 PVC Foot Steps : |
| 309 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 310 | ii Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 311 | (e ) CI-D Joint : 28.1 Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete |
| 312 | e D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. Pipe lines laid complete. |
| 313 | f GI Pipe : ( Rising Spindle for Valve Operation) 28.35 Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete. |
| 314 | b Diff.rates of materials : |
| 315 | From Mirthal |
| 316 | From Lohand Khad |
| 317 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 318 | From Mirthal 204 km |
| 319 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 290102.54 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 15520.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 305622.54 1.Capital Works \" NON CSR based Items Puddle Collar : RUIDP SOR 2022-23Code No. 19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer |
| 320 | 19.63.6 Capital Works \" NON CSR based Items ( In Rs) 13700.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 305622.54 Non - CSR based amount ( In Rs) 13700.0 Total : CSR + Non CSR Amount : ( Rs) 319322.54 Columns of 300mm dia (Column Height 6m) for Solar Panel S. no. Ref. Particulars of Items and details of works Unit Quantity Total Rate Rate ( Rs) in Words Amount M-30 : |
| 321 | 10.17 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 322 | C / Shuttering : ( Columns) |
| 323 | 9.5 C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 324 | Steel : |
| 325 | 18.18 Diff.rates of materials : |
| 326 | From Mirthal 192 km |
| 327 | From Lohand Khad 199 km |
| 328 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 329 | From Mirthal 192 km |
| 330 | From Lohand Khad 199 km Capital Works \" CSR based Items ( In Rs) 1065828.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 57022.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1122850.0 Total : CSR Amount : ( Rs) 1122850.0 RW Sump, Pumping Machinery Room, Panel Room & Store Room Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Estimation for RW Sump Earthwork excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 331 | i Back up Qty : Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum ,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 332 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 333 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 334 | 2 nd and 3 rd chain,per chain of 30 meters |
| 335 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 336 | C.C. 1:2:4 : |
| 337 | 10.13 a (ii) M-30 : Plinth level |
| 338 | 10.17 M-30 : Plinth level > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. > 4.0 m |
| 339 | Back up Qty. Shuttering : ( Raft foundation) |
| 340 | 9.1 C / Shuttering : ( Walls) |
| 341 | 9.2 C / Shuttering > 4.0 m.height : ( Walls) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. C / Shuttering > 4.0 m.height : ( Walls) |
| 342 | C / Shuttering : (Columns) |
| 343 | 9.4 C / Shuttering > 4.0 m.height : ( Columns) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. |
| 344 | C / Shuttering : (Slab) |
| 345 | 9.8 Steel : |
| 346 | 18.18 PVC Foot Steps : |
| 347 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer in charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 348 | ii Diff.rates of materials : |
| 349 | From Mirthal |
| 350 | From Lohand Khad |
| 351 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 352 | From Mirthal 192 km |
| 353 | From Lohand Khad 199 km Capital Works \" CSR based Items ( In Rs) 1028451.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 55022.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1083473.0 Total : CSR Amount : ( Rs) 1083473.0 Pumping Station, Panel Room Combined (Above GL) Brick masonary work (1:5) : |
| 354 | 11.6 Brick masonary work (1:5) : > 4.0 m. 11.29 b Extra for work above 4 meters ( where any single storey exceeds 4 meters in height 0 for every additional height of 2 meters or part thereof for Brick Work / concrete Block / Clay Block |
| 355 | CC 1:2:4 : |
| 356 | 10.13 a (ii) CC 1:4:8 : ( Below Ironite flooring) |
| 357 | 10.11a (ii) DPC : |
| 358 | 10.26 M-30 : |
| 359 | 10.22 Extra height Concrete : 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. Cum Above 4.0 m.height : |
| 360 | Steel : |
| 361 | 18.18 C / Shuttering : (Columns) |
| 362 | 9.4 C / Shuttering > 4.0 m.height : ( Columns) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. |
| 363 | > 4.0 m.height : |
| 364 | C/shuttering : ( Lintels) |
| 365 | 9.6 CP 12.5 mm.thk. : (1:4) |
| 366 | 15.9 CP 12.5 mm.thk. : (1:2) |
| 367 | 15.7 White washing : |
| 368 | 16.3 Preparation of plastered surface : |
| 369 | 16.6 Distempering : |
| 370 | 16.7 Oil Bound Distemper : |
| 371 | 16.1 Earth filling under floors : |
| 372 | 6.8 / (a) / (ii) Ironite flooring: |
| 373 | 14.4 Steel windows and ventilators : 18.2 Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer. |
| 374 | (b) Fixing : |
| 375 | 18.23 Glass panes : 18.25 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. |
| 376 | (a) Rolling Shutter : |
| 377 | 18.11 (a) Parapet Wall : |
| 378 | 11.36 CC 1:2:4 : ( coping ) |
| 379 | 10.13 a (ii) Cement Concrete 1:2:4 gola : |
| 380 | 13.55 Top Khurra : |
| 381 | 13.45 Bottom Khurra : |
| 382 | 13.51 Drip Course : |
| 383 | 11.42 Dry Brick edge paving : |
| 384 | 14.18 CI Rain water pipes : |
| 385 | 13.41 CI head : |
| 386 | 13.42 CI shoes : |
| 387 | 13.43 Embedding of CI Rain water pipes : |
| 388 | 13.44 Estimation for Store Room : 4.0 x 5.30m ( I / dimn) Excavation : 6.7 Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around |
| 389 | (a) CC 1:2:4 : |
| 390 | 10.13 a (ii) M-30 : |
| 391 | 10.17 Brick masonary work in cm 1:5 : |
| 392 | 11.5 Diff.rates of materials : |
| 393 | From Mirthal |
| 394 | From Lohand Khad |
| 395 | From Ferozpur |
| 396 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 397 | From Mirthal 204 km |
| 398 | From Lohand Khad 209 km |
| 399 | Carriage of materials : Capital Works \" CSR based Items ( In Rs) 1090581.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 58346.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1148927.0 Total : CSR Amount : ( Rs) 1148927.0 5(i) Water Treatment Plant 3.0 MLD Capacity (22 Hrs @136.25 KLH) Sl. No. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" NON CSR based Items |
| 400 | 13.2.1PHED, Raj. BSR (2023-24) Capital Works \" NON CSR based Items ( In Rs) 13137000.0 Total : Non CSR Amount : ( Rs) 13137000.0 Mixing Chamber to CWR Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : (Mech.) 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 401 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 402 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 403 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 404 | 2 nd and 3 rd chain,per chain of 30 meters |
| 405 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 406 | C.C. 1:2:4 : |
| 407 | 10.13 a (ii) M-30 : |
| 408 | 10.17 M-30 : Plinth level > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 409 | Shuttering : |
| 410 | 9.1 C / Shuttering : ( walls) |
| 411 | 9.2 C / Shuttering > 4.0 m.height : ( walls) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. |
| 412 | C / Shuttering : ( slab) |
| 413 | 9.8 Steel : |
| 414 | 18.18 PVC Foot Steps : |
| 415 | 29.35 RCC Manhole cover with frame : 29.34 Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD) A RCC Man hole cover with frame a 560 mm.i/d.RCC Man hole cover with frame as per ISI |
| 416 | ii Food Grade Epoxy Paint Work : Prepartion of Concrete surface : |
| 417 | 16.65 Cement Primer : |
| 418 | 16.31 Difference in rates of materials : |
| 419 | From Mirthal |
| 420 | From Lohand Khad |
| 421 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 422 | From Mirthal 204 km |
| 423 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 304555.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 16294.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 320849.0 1.Capital Works \" NON CSR based Items Providing and Applying Food grade Epoxy based water proof coat : |
| 424 | Telengana CSR 2023 - 24 Buildings Capital Works \" NON CSR based Items ( In Rs) 26557.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 320849.0 Non - CSR based amount ( In Rs) 26557.0 Total : CSR + Non CSR Amount : ( Rs) 347406.0 Inlet Valve Chamber to CWR Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork in excavation : (Mechanically) 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 425 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 426 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 427 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 428 | 2 nd and 3 rd chain,per chain of 30 meters |
| 429 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 430 | C.C. 1:2:4 : |
| 431 | 10.13 a (ii) M-30 : |
| 432 | 10.17 Shuttering : |
| 433 | 9.1 C / Shuttering : ( walls) |
| 434 | 9.2 Steel : |
| 435 | 18.18 PVC Foot Steps : |
| 436 | 29.35 Pre Cast Slab Cover : |
| 437 | Rate analsysis attached based on CSR Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 438 | (e ) DI K-7 Pipes : 28.7 B Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,cost of rubber ring. A DI pipe as per IS 8329 DI-K7 |
| 439 | (e) DI Specials : 28.25 Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects. |
| 440 | a GI Pipe : ( Rising Pipe for Valve Operation) 28.35 Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete. |
| 441 | b Diff. rates of materials : |
| 442 | From Mirthal |
| 443 | From Lohand Khad |
| 444 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 445 | From Mirthal 204 km |
| 446 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 331782.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 17750.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 349532.0 Total : CSR Amount : ( Rs) 349532.0 Chlorine Contact tank Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 447 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 448 | 6.19 Loading by Mechanical means : Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 449 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 450 | 2 nd and 3 rd chain,per chain of 30 meters |
| 451 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 452 | C.C. 1:2:4 : |
| 453 | 10.13 a (ii) M-30 : |
| 454 | 10.17 M-30 : > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 455 | Shuttering : |
| 456 | 9.1 C / Shuttering : ( Walls) |
| 457 | 9.2 C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 458 | C / Shuttering : ( Columns) |
| 459 | 9.4 C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 460 | C / Shuttering : ( Beam ) 9.6 Centering and shuttering for sides and soffits of beam,beams,launching girders,bressumers,lintels. C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 461 | C / Shuttering : ( Slab ) 9.8 Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 462 | Steel : |
| 463 | 18.18 Pre Cast Slab Cover over Chamber : |
| 464 | Based on CSR Prepartion of Concrete surface : |
| 465 | 16.65 Cement Primer : |
| 466 | 16.31 Diff.rates of materials : |
| 467 | From Mirthal |
| 468 | From Lohand Khad |
| 469 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 470 | From Mirthal 204 km |
| 471 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 1140079.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 60994.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1201073.0 1.Capital Works \" NON CSR based Items Providing and Applying Food grade Epoxy based water proof coat : |
| 472 | Telengana CSR 2023 - 24 Capital Works \" NON CSR based Items ( In Rs) 85540.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 1201073.0 Non - CSR based amount ( In Rs) 85540.0 Total : CSR + Non CSR Amount : ( Rs) 1286613.0 Clear Water Reservoir Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Earthwork excavation : 29.2 Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. A Depth upto 1.50 m.B.G.L. |
| 473 | i Extra depth excavation : 29.2 / B Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 Cum,total excavation will be paid as per chapter 6.19 and quantity of backfilling quantity as per item 4.1 (a) |
| 474 | 6.19 Rate for loading into wagon,Trucks or boats within 15 meters lead. |
| 475 | 4.1 (A) Carriage of Earth : ( Balance earth Qty) 5.1 ( i) Surkhi,Sand,Earth,Fly Ash,Bajri,Ballast,Stone Boulders,kankar and Building Rubbish. |
| 476 | 2 nd and 3 rd chain,per chain of 30 meters |
| 477 | For subsequent chain per chain of 30 meters up to 0.50 km |
| 478 | C.C. 1:2:4 : |
| 479 | 10.13 a (ii) M-30 : |
| 480 | 10.17 M-30 : > 4.0 m 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. |
| 481 | Brick Masonary Work : |
| 482 | 11.6 Steel Chowkats : 18.24 Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. |
| 483 | (c) SS Handles : |
| 484 | 17.7 SS Tower Bolts : |
| 485 | 17.77 CP 12.5 mm : |
| 486 | 15.7 White washing : |
| 487 | 16.3 Distempering : |
| 488 | 16.7 Shuttering : |
| 489 | 9.1 C / Shuttering : ( Walls) |
| 490 | 9.2 C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 491 | C / Shuttering : ( Columns) |
| 492 | 9.4 C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 493 | C / Shuttering : ( Beam ) 9.6 Centering and shuttering for sides and soffits of beam,beams,launching girders,bressumers,lintels. C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 494 | C / Shuttering : ( Slab ) 9.8 Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. C / Shuttering > 4.0 m.height : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof. |
| 495 | Staircase Railing : |
| 496 | 18.3 Steel : |
| 497 | 18.18 Prepartion of Concrete surface : |
| 498 | 16.65 Cement Primer : |
| 499 | 16.31 Providing and Applying Food grade Epoxy based water proof coat : Diff.Rates : |
| 500 | From Mirthal |
| 501 | From Lohand Khad |
| 502 | From Ferozpur |
| 503 | Carriage : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 504 | From Mirthal 204 km |
| 505 | From Lohand Khad 209 km |
| 506 | Capital Works \" CSR based Items ( In Rs) 4691979.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 251021.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 4943000.0 1.Capital Works \" NON CSR based Items Steel Doors : |
| 507 | NSRUIDP SOR 2023 / Code no. 29.12 Steel beading : |
| 508 | NS RUIDP SOR 2023 / Code no. 29.13 CI Ventilator Cowl : |
| 509 | Chhattisgarh CSR June 2020Item no.26.3 Providing and Applying Food grade Epoxy based water proof coat : |
| 510 | NS Capital Works \" NON CSR based Items ( In Rs) 427060.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 4943000.0 Non - CSR based amount ( In Rs) 427060.0 Total : CSR + Non CSR Amount : ( Rs) 5370060.0 RW Sump and Pumping Machinery Room, Panel Room & Store room Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Panel Room Brick masonary work (1:5) : ( up to 4.0 m.height) |
| 511 | 11.6 Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m ) 11.29 b Extra for work above 4 meters ( where any single storey exceeds 4 meters in height 0 for every additional height of 2 meters or part thereof for Brick Work / concrete Block / Clay Block |
| 512 | CC 1:2:4 : |
| 513 | 10.13 a (ii) DPC : |
| 514 | 10.26 M-30 : |
| 515 | 10.22 Extra height Concrete : 10.49 Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof. > 4.0 m : |
| 516 | Steel : |
| 517 | 18.18 C / Shuttering : (Columns) |
| 518 | 9.4 C / Shuttering > 4.0 m.height : ( Columns) 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. |
| 519 | C/shuttering : 9.8 Centering and Shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. : 9.16 Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof. C / Shuttering > 4.0 m.height : |
| 520 | C/shuttering : ( Lintels) |
| 521 | 9.6 CP 12.5 mm.thk. : (1:4) |
| 522 | 15.9 CP 12.5 mm.thk. : (1:2) |
| 523 | 15.7 White washing : |
| 524 | 16.3 Preparation of plastered surface : |
| 525 | 16.6 Distempering : |
| 526 | 16.7 Oil Bound Distemper : |
| 527 | 16.1 Earth filling under floors : |
| 528 | 6.8 / (a) / (ii) Ironite flooring: |
| 529 | 14.4 Steel windows and ventilators : 18.2 Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer. |
| 530 | (b) Fixing : |
| 531 | 18.23 Glass panes : 18.25 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. |
| 532 | (a) Doors Shutter : 17.17 (i) Kail wood doors shutter and window shutter panelled,galzed or glazed and panelled,including hinges,screws,chokes,cleats and cords etc. complete fixed in position.(Single Leaf) |
| 533 | (a) Aluminium Fittings : 17.23 Cost of Aluminium fittings complete for doors,windows such as tower bolts,handles,Stoppers and screw etc.for these fittings.(Excluding sliding bolt) |
| 534 | (ii) Steel Chowkats : 18.24 Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. |
| 535 | (c) Rolling Shutter : |
| 536 | 18.11 (a) Parapet Wall : |
| 537 | 11.36 CC 1:2:4 : ( coping ) |
| 538 | 10.13 a (ii) Cement Concrete 1:2:4 gola : |
| 539 | 13.55 Back up Qty : Top Khurra : |
| 540 | 13.45 Bottom Khurra : |
| 541 | 13.51 Drip Course : |
| 542 | 11.42 Dry Brick edge paving : |
| 543 | 14.18 CI Rain water pipes : |
| 544 | 13.41 CI head : |
| 545 | 13.42 CI shoes : |
| 546 | 13.43 Embedding of CI Rain water pipes : |
| 547 | 13.44 Store Room Above GL Excavation : 6.7 Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around |
| 548 | (a) CC 1:2:4 : |
| 549 | 10.13 a (ii) M-30 : Plinth level |
| 550 | 10.17 Brick masonary work in cm 1:5 : (plinth level) |
| 551 | 11.5 Difference Rates : |
| 552 | From Mirthal |
| 553 | From Lohand Khad |
| 554 | From Ferozpur |
| 555 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 556 | From Mirthal 204 km |
| 557 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 1279732.6399999997 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 68466.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 1348198.6399999997 Total : CSR Amount : ( Rs) 1348198.6399999997 Clear Water Transmission Main DI K-7 Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : ( Manually) 28.1 Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earthwork upto 1.50 mt.Depth. |
| 558 | i Excavation : (Mech.) 28.2 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earthwork upto 1.50 mt.Depth. |
| 559 | i DI K-7 Pipes : 28.7 B Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,cost of rubber ring. A DI pipe as per IS 8329 DI-K7 mm.i/d. |
| 560 | (e ) DI Specials : 28.25 Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects. |
| 561 | a Scour Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 562 | (b ) D / F Pipe : 28.23 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 563 | b Valve chambers : 28.66 Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. |
| 564 | a Difference rates of materials : |
| 565 | From Mirthal |
| 566 | From Lohand Khad |
| 567 | From Ferozpur |
| 568 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 569 | From Mirthal 204 km |
| 570 | From Lohand Khad 209 km |
| 571 | Bailing out of water : 28.49 Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. |
| 572 | a Capital Works \" CSR based Items ( In Rs) 1953202.46 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 104496.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 2057698.46 Total : CSR Amount : ( Rs) 2057698.46 1.Capital Works \" NON CSR based Items Air Valve : NS Based on PHED Rajasthan 2023Code no.6.6 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide-HBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 6.6.1 Class PN 1.0 |
| 573 | 6.6.1.1 Capital Works \" NON CSR based Items ( In Rs) 13153.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 2057698.46 Non - CSR based amount ( In Rs) 13153.0 Total : CSR + Non CSR Amount : ( Rs) 2070851.46 Minor Crossing 10m wide with Encasement Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items |
| 574 | 16.17 Excavation : |
| 575 | 6.19 CC 1:2:4 : |
| 576 | 10.13 a (ii) Shuttering : |
| 577 | 9.1 Diff.in Rates of materials : |
| 578 | From Mirthal |
| 579 | From Lohand Khad |
| 580 | Carriage of Materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 581 | From Mirthal 204 km |
| 582 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 73296.03000000001 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 3921.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 77217.03000000001 Total : CSR Amount : ( Rs) 77217.03000000001 Clear Water Transmission Main DI K-7 100 mm.i /d. and uPVC Pipeline Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : ( Manually) 28.1 Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earthwork upto 1.50 mt.Depth. |
| 583 | i Excavation : (Mech.) 28.2 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earthwork upto 1.50 mt.Depth. |
| 584 | i DI K-7 Pipe : 28.7 B Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,cost of rubber ring. A DI pipe as per IS 8329 DI-K7 |
| 585 | (f) uPVC Pipe : 28.12 Providing and laying,jointing,fixing and testing ISI Marked uPVC Pipe lines as per ISI -4985 -2000, including specials such as tees,bends,sockets,elbow etc.cutting,testing ( including cost of specials ),in the ground complete in all respects. B uPVC Pipe 6 kgf /cm2 |
| 586 | a DI Specials : 28.25 Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects. |
| 587 | a Sluice Valve : 28.27 Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.) B Class PN-1.6 as per ISI |
| 588 | (b ) Jointing of DI pipes : ( for specials) 28.1 Jointing of D.I.Pipe and Specials with rubber tyton joints fitted complete excluding the cost of rubber gasket including testing etc.complete in all respect. |
| 589 | (b) CI Surface Boxes : |
| 590 | 28.32 C.I.Indicating Plates : |
| 591 | 28.33 Valve chambers : 28.66 Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. |
| 592 | a 14.0 Diff.rates of materials : |
| 593 | From Mirthal |
| 594 | From Lohand Khad |
| 595 | From Ferozpur |
| 596 | 15.0 15.0 Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 597 | From Mirthal 192 km |
| 598 | From Lohand Khad 199 km |
| 599 | 16.0 16.0 Bailing out of water : 28.49 Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. |
| 600 | a Capital Works \" CSR based Items ( In Rs) 195666.12000000002 0.0535 10468.0 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 206134.12000000002 Total : CSR Amount : ( Rs) 206134.12000000002 Boundary Wall Sl.no. Reference Particulars of Items and details of works Unit Quantity Rate (Rs) Rate in words (Rs) Amount (Rs) 1.Capital Works \" CSR based Items Excavation : |
| 601 | 6.19 CC 1:2:4 : |
| 602 | 10.13 a (ii) M-30 : |
| 603 | 10.17 Steel : |
| 604 | 18.18 Shuttering : |
| 605 | 9.1 C / shuttering : ( Columns) |
| 606 | 9.4 C / shuttering : ( Beams) |
| 607 | 9.6 115 mm.thk.BBM : |
| 608 | 11.36 CP 20 mm.thk. : |
| 609 | 15.2 White wash : |
| 610 | 16.3 Dry distemper : |
| 611 | 16.7 Sliding Shutters : |
| 612 | 18.9 Diff.in rates of materials : |
| 613 | From Mirthal |
| 614 | From Lohand Khad |
| 615 | From Ferozpur |
| 616 | Carriage of materials : 5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth |
| 617 | From Mirthal 204 km |
| 618 | From Lohand Khad 209 km Capital Works \" CSR based Items ( In Rs) 2888314.06 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535 154525.0 Capital Works \" CSR based Items after adding 5.35% ( In Rs) 3042839.06 1.Capital Works \" NON CSR based Items Barbed wire fencing : |
| 619 | (Rate analysis based on CSR ) Capital Works \" NON CSR based Items ( In Rs) 129720.0 Capital Works CSR based amount after adding 5.35% ( In Rs) 3042839.06 Non - CSR based amount ( In Rs) 129720.0 Total : CSR + Non CSR Amount : ( Rs) Total : CSR Amount : ( Rs) 3172559.06 Summary of Mechanical Work for WTP at Mudki ,District Firozpur S. No. Description Amount (in Rs) |
| 620 | Intake Pumping Station |
| 621 | Raw Water Pumping Station including Floating Arms |
| 622 | S&S Tank - Dewatering Pumps |
| 623 | Clear Water Pumping Station Total 11440673.8854881 Intake Pumping Station ( for 24 Hours) Sr.no CSR Item No Specification Unit Qty Total Rate(Rs) Total Rate in Word Amount (Rs) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: Mechanical Works: Vertical Turbine (VT) Pump NS Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Vertical Turbine (VT) Pump with squiral cage induction motor of CI IS: 210 GR FG 260 with 2% Nickel Casing & suction bowl, Impeller CF 8M ,Shaft SS 410 ,Sole/ Base plate & Column pipe MS to IS 2062 Gr. B,Motor stool and Foundation bolts etc. complete with all respect as per specification. |
| 624 | DI flanged Pipe RUIDP 2023,19.13 Providing, lowering, laying in trenches, aligning, fixing in position and double flanged (welded) centrifugally (spun) Ductile iron ISI marked K-9 grade pipes as per IS:8329-2000 (amended upto date), (including jointing and jointing material) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately. |
| 625 | Dismantling joint RUIDP 2023,19.56 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. |
| 626 | EOT RUIDP SOR 2023,18.9 Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rolled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches , LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer. |
| 627 | SS Manual Coarse Bar Screen ( 0.9 X 3.5 ) M NS Supply,fabrication,fixing and Testing of stainless steel (SS-304) Manual Coarse Bar Screen with flat bar 50 mm x 8 mm, spacing of bars 20 mm suitable for mounting in channel of specified size with inclination not more than 75 degree and a movable complete in all respect as per Technical specification,reputed make and the direction of the Engineer |
| 628 | Motorized Sluice Valve : RUIDP 2023,19.29 Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 1.6 |
| 629 | Motorized Butterfly Valve : RUIDP 2023,19.34 Providing, lowering, laying, aligning, fixing in position in pipe line,Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioningalong with pipeline as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 1.6 |
| 630 | Rubber expansion bellows NS Providing, installation, testing and commissioning of following Rubber Expansion bellows of 16 bar rating, MS split flange,Class 150#, with tie rods & 6 plates, single convolution bellows. as per technical specifications and layout drawings including jointing material like nuts, bolts, plates etc. complete in all respect as per technical specification and as per direction of Engineer. |
| 631 | Puddle collar RUIDP SOR 2023,19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. |
| 632 | NON CSR Items ( In Rs) 2653385.184 D.I.Specials : 28.25 Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 633 | a Non Return Valve 28.31 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra B Class pn - 1.6 as per ISI with gun metal flap |
| 634 | e Sluice Valve : 28.27 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) |
| 635 | B(d) G.I.Pipe : 40 mm.i/d. 28.36, Providing and laying,jointing,fixing,testing ISI Marked G.I.Pipe ( as per IS : 1239) B-Class premium make such as (approved make) including cost of specials such as tees,bends,sockets,elbow etc.cutting,threading and testing in trenches in the ground complete. |
| 636 | e CSR ITEMS AMOUNT (RS) 132381.5016 AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs) 139463.91193560002 TOTAL Non CSR & CSR ITEMS 2792849.0 Total in Lakh 27.92849 Raw Water Pumping Station (Pump for 22 Hours) Sr.no CSR Item No Specification Unit Qty Total Rate(Rs) Total Rate in Word Amount (Rs) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: Mechanical Works: Vertical Turbine (VT) Pump NS Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Vertical Turbine (VT) Pump with squiral cage induction motor of CI IS: 210 GR FG 260 with 2% Nickel Casing & suction bowl, Impeller CF 8M ,Shaft SS 410 ,Sole/ Base plate & Column pipe MS to IS 2062 Gr. B,Motor stool and Foundation bolts etc. complete with all respect as per specification. |
| 637 | DI flanged Pipe RUIDP 2023,19.13 Providing, lowering, laying in trenches, aligning, fixing in position and double flanged (welded) centrifugally (spun) Ductile iron ISI marked K-9 grade pipes as per IS:8329-2000 (amended upto date), (including jointing and jointing material) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately. |
| 638 | Dismantling joint RUIDP 2023,19.56 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. |
| 639 | EOT RUIDP 2023,18.9 Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rolled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches , LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer. |
| 640 | Puddle collar RUIDP 2023,19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. |
| 641 | Motorized Sluice Valve : RUIDP 2023,19.29 Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 1.6 |
| 642 | Motorized Butterfly Valve : RUIDP 2023,19.34 Providing, lowering, laying, aligning, fixing in position in pipe line,Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioningalong with pipeline as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 1.6 |
| 643 | Floating Arm NS Providing, installation, testing and commissioning of SS 304 floating suction assly.(Floating arms). of flange ,elbow,pipe ,swivel joint, float assly and bell mouth assly as per technical specifications and layout drawings including jointing material like nuts, stud, gasket etc. complete in all respect as per technical specification and as per direction of Engineer. |
| 644 | Rubber expansion bellows NS Providing, installation, testing and commissioning of following Rubber Expansion bellows of 16 bar rating, MS split flange,Class 150#, with tie rods & 6 plates, single convolution bellows. as per technical specifications and layout drawings including jointing material like nuts, bolts, plates etc. complete in all respect as per technical specification and as per direction of Engineer. |
| 645 | NON CSR Items ( In Rs) 4769296.16 D.I.Specials : 28.25 Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 646 | a Non Return Valve 28.31 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra B Class pn - 1.6 as per ISI with gun metal flap |
| 647 | e Sluice Valve : 28.27 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) |
| 648 | B(e) G.I.Pipe : 40 mm.i/d. 28.36, Providing and laying,jointing,fixing,testing ISI Marked G.I.Pipe ( as per IS : 1239) B-Class premium make such as (approved make) including cost of specials such as tees,bends,sockets,elbow etc.cutting,threading and testing in trenches in the ground complete. |
| 649 | e CSR ITEMS AMOUNT (RS) 199393.6516 AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs) 210061.21196060002 TOTAL Non CSR & CSR ITEMS 4979357.0 Total in Lakh 49.79357 Dewatering Pump Sr.no CSR Item No Specification Unit Qty Total Rate(Rs) Total Rate in Word Amount (Rs) Supply, Installation, testing, and commissioning of the following items complete in all respects and as per scope of work, specification, and as required at site: Mechanical Works: Non -Clog Submersible pump RUIDP 2023,18.1 Supply delivery at the site with necessary packing, receiving, unloading, shifting, storing, installation, testing, and commissioning of Non-clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M, Shaft SS 410, mechanical seal with 10M Power & Control cable, 5M SS Chain,,10M, 50mm SS Guide pipe, Duck Foot Bend, with Guide wire SS 304, etc. complete with all respect as per specification |
| 650 | Dismantling joint RUIDP 2023,19.56 Providing, lowering, laying, aligning, fixing in position, and jointing CI dismantling joint (suitable for sluice valves, etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing, and commissioning as per Technical Specifications and as per direction of Engineer. |
| 651 | Lifting arrangement for pumps |
| 652 | NS RUIDP 2023,18.10 Supply, installation, and commissioning of Mono Rail Single Girder Crane suitable for lift up to 9m with chain 9m pulley block and traveling trolley excluding cost of girder complete in all respects as per the direction of the Engineer. |
| 653 | NON CSR Items ( In Rs) 434410.0 DI flanged Pipe 28.23, Providing, Stringing out, cutting, Jointing, and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:83292000, Class-K9 and laying the same in trenches to correct alignment and gradients, jointed with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 654 | c D.I.Specials : 28.25 Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 655 | a Non Return Valve 28.31 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt, rubber insertion, etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 then 5% will be paid extra B Class pn - 1.6 as per ISI with gun metal flap |
| 656 | d Sluice Valve : 28.27 Providing & fixing C.I/D. I Flanged end, stem of SS (AIS 1410), and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer) |
| 657 | B(c) Lifting arrangement for pumps 18.1, Steel work fixed independently without connecting plates including cutting hoisting and fixing in position |
| 658 | a CSR ITEMS AMOUNT (RS) 256825.815 AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs) 270565.9961025 TOTAL Non CSR & CSR ITEMS 704975.9961025 Total in Lakh 7.049759961025 Clear Water Pumping Station (Pump for 22 Hours) Sr.no CSR Item No Specification Unit Qty Total Rate(Rs) Total Rate in Word Amount (Rs) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: Mechanical Works: Vertical Turbine (VT) Pump NS Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Vertical Turbine (VT) Pump with squiralcage induction motor of CI IS: 210 GR FG 260 with 2% Nickel Casing & suction bowl, Impeller CF 8M ,Shaft SS 410 ,Sole/ Base plate & Column pipe MS to IS 2062 Gr. B, Motor stool and Foundation bolts etc. complete with all respect as per specification. |
| 659 | DI flanged Pipe RUIDP 2023,19.13 Providing, lowering, laying in trenches, aligning, fixing in position and double flanged (welded) centrifugally (spun) Ductile iron ISI marked K-9 grade pipes as per IS:8329-2000 (amended upto date), (including jointing and jointing material) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately. |
| 660 | Dismantling joint RUIDP 2023,19.56 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. |
| 661 | EOT RUIDP 2023,18.9 Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rolled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches, LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer, and two coats of synthetic paint and as per the direction of the Engineer. |
| 662 | Motorized Sluice Valve : RUIDP 2023,19.29 Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 16 |
| 663 | Motorized Butterfly Valve : RUIDP 2023,19.34 Providing, lowering, laying, aligning, fixing in position in pipe line,Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioningalong with pipeline as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible class PN 1.6 |
| 664 | Rubber expansion bellows NS Providing, installation, testing and commissioning of following Rubber Expansion bellows of 16 bar rating, MS split flange,Class 150#, with tie rods & 6 plates, single convolution bellows. as per technical specifications and layout drawings including jointing material like nuts, bolts, plates etc. complete in all respect as per technical specification and as per direction of Engineer. |
| 665 | Puddle collar RUIDP 2023,19.63 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. 250 mm dia Each 2.0 13700.0 Thirteen Thousand Seven Hundred Rupees and No Paise 27400.0 NON CSR Items ( In Rs) 2824027.24 D.I.Specials : 28.25 Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 666 | a Non Return Valve 28.31 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra B Class pn - 1.6 as per ISI with gun metal flap |
| 667 | e Sluice Valve : 28.27 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) |
| 668 | B(d) G.I.Pipe : 40 mm.i/d. 28.36 Providing and laying,jointing,fixing,testing ISI Marked G.I.Pipe ( as per IS : 1239) B-Class premium make such as (approved make) including cost of specials such as tees,bends,sockets,elbow etc.cutting,threading and testing in trenches in the ground complete. |
| 669 | e CSR ITEMS AMOUNT (RS) 132382.2016 AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs) 139464.6493856 TOTAL Non CSR & CSR ITEMS 2963491.8893856 Total in Lakh 29.634918893856 Summary of Electrical, Instrumentation & SCADA Work, Mudki S. No. Description Amount (Rs.) |
| 670 | Intake Pumping Station |
| 671 | Raw Water Pumping Station |
| 672 | Clear Water Pumping Station |
| 673 | Sub-Station for Raw & Clear water Pumping Station and WTP |
| 674 | SCADA for Intake, Raw Water & Clear Water Pumping Station, WTP & Sub-Station Total (in Rs.) 16180040.6383 Total (in Lakhs) 161.800406383 Electrical, Instrumentation & RTU Works for Intake Pump House, Water Suppy- Mudki Sr.No. Item No. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs.) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: 1. Capital Works \" CSR based Items A. HT Cables & Accessories: 34.36 XLPE INSULATED HT CABLES: 34.36 A XLPE INSULATED HT ARMOURED CABLES (UNDERGROUND): Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:- |
| 675 | (v) 34.36 C S/E of Heat shrinkable cable end termination/ Straight through joint kit for 11 KVA /6.6 KV (E) XLPE Cables as approved & desired by Enginer in charge:- |
| 676 | (iii) |
| 677 | (vii) B. LT Cables & Accessories: 34.10 A XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- |
| 678 | (xxvi) 34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 679 | (xxvi) |
| 680 | (xxxv) 34.25 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- |
| 681 | (ii) 34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 34.37 B Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2 mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 682 | (iii) |
| 683 | (iv) 34.38 C Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections. |
| 684 | (iii) |
| 685 | (ix) 34.38 A Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- |
| 686 | (iii) |
| 687 | (vi) C. Earthing: 34.13 (xiv) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. To make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). |
| 688 | (b) 34.13 (xv) Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- |
| 689 | 34.13 (xx) D. Wiring, Lighting & Accessories (for Panel room, Pump House): 34.04 RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES : Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 690 | (i) b |
| 691 | (vi) 34.09 (xiii) Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 692 | (c.) 34.17 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB\"s/RCBO\"s/ RCCB\"s: Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with rovision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc. |
| 693 | (ii) 34.16 A MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 694 | (vi) 34.29 B Single Arm Brackets for GI Pipe Pole: (i) Supply and erection of GI pipe 40mm dia (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105 deg., the bracket should be fixed on top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect approved by Engineer- in -charge at site:- |
| 695 | (a) E. Outdoor Lighting: 34.31 3-STEPPED STEEL TUBULAR POLE: Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SPMpa) of suitable length confirming to IS: 2713- (PART-II)-1980 (Steel tubes confirming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminium paint as required:- |
| 696 | (i) 34.33 CEMENT CONCRETE MUFFS: (v) Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in- Charge at site:- |
| 697 | (a) 34.29 C SINGLE/ DOUBLE/ TRIPLE/ FOUR/ SIX ARMS BRACKET FOR STEEL TUBULAR POLE: (i) Supply and erection of G.I. Pipe 50mm dia. (Medium) Single/ Double/ Triple arm bracket of suitable length welded with MS canopy 80mm inner dia., outer dia 89.5mm (Medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3Nos.½\" x 1½\" size nut bolt fully threaded. The bracket should have MS sheet (1.62mm thick) ring of 89.5mm dia. for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225/300/375mm x 150mm x 5mm thick (225mm for 1.5m, 300mm for 2m & 375mm for 2.5m long bracket) with two coats of an approved aluminium paint as desired by Engineer-in-charge at site:- |
| 698 | (a) 34.12 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposesincluding bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 699 | (x) 34.33 (vii) Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB\"s) complete in all respect as approved and desired by the Engineer In-Charge at site:- |
| 700 | (a) 34.09 (xii) Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexiblewire with copper conductor cable (ISI marked) confirm to IS:694/1990 left barein pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 701 | (d) Capital Works \"CSR based Electrical, Instrumentation & RTU Items (In Rs) 425773.5 0.0535 22778.88225 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works \"CSR based Electrical, Instrumentation & RTU Items after adding 5.35% (In Rs) 448552.38225 2.Capital Works \" Non-CSR based Items A. HT System: |
| 702 | RUIDP ISOR 2023, 72.4 |
| 703 | RUIDP ISOR 2023, 72.4 RUIDP ISOR 2023, 72.2 SITC of star rated Aluminium wound distribution Transformer of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & as per BEE star - 1 & BIS approved as per IS 2026- 1977 & losses as defined as per 2014 (Fourth Revision) Level-1 . including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C upto 200 KVA & 40-45 degree C for above 200 KVA, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect .The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 704 | B. B. LT Panel with Starter: |
| 705 | NS RUIDP ISOR 2023, 44.6 SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus. |
| 706 | C. C. LT Cables & Accessories: RUIDP ISOR 2023, 60.4 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 2.5 Sq. mm (Ref: 60.4.2) |
| 707 | D. D. Earthing: RUIDP ISOR 2023, 63.5 Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 708 | E. E. Wiring, Lighting & Accessories (for Panel room, Pump House): RUIDP ISOR 2023, 66.4 Providing & Fixing of IP20, 2\"x2\" LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in- charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . Surface Mounting (Ref: 66.4.2) |
| 709 | RUIDP ISOR 2023, 64.12 RUIDP ISOR 2023, 64.12 Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 710 | RUIDP ISOR 2023, 64.11 RUIDP ISOR 2023, 64.11 Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 711 | RUIDP ISOR 2023, 67.12 RUIDP ISOR 2023, 67.12 Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 712 | F. F. Outdoor Lighting: RUIDP ISOR 2023, 67.12 Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 713 | G. G. Flow Meter, RTU, Pressure Gauge & Cables: RUIDP ISOR 2023, 43.28 Supply, Installation, testing and commissioning of Battery powered Electromagnetic flow meters with GSM/GPRS based with an accuracy of ± 1% of measured value, ingress protection Electronics IP 66 and flow tube IP 68, MOC: lining Neoprene rubber/Hard rubber/PTFE, Flange - SS316/SS304/MS/CS, Electrode - SS 316/Hastalloy, Coil Housing - SS, battery life of min. 5 years, LCD display 5 digit for instantaneous flow and 9 digit for Totalized flow as per technical specifications of following sizes: |
| 714 | RUIDP ISOR 2023, 47.12 |
| 715 | RUIDP ISOR 2023, 73.41 RUIDP ISOR 2022, E111500 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111540) |
| 716 | RUIDP ISOR 2022, E111400 RUIDP ISOR 2022, E111400 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (inner sheated GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel armoured overall PVC sheathed (ST-1) overall screened Core armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111440) |
| 717 | Capital Works \"Non CSR based Electrical, Instrumentation & RTU Items (In Rs) 1483086.0 Total : Part - C (Electrical, Instrumentation & RTU) CSR + Non CSR Amount : ( Rs) 1931638.38225 Electrical, Instrumentation & PLC Works for Raw Water Pump House, Water Suppy- Mudki Sr.No. Item No. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs.) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: 1. Capital Works \" CSR based Items A. LT Cables & Accessories: 34.10 A XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- |
| 718 | (xxvii) 34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 719 | (xxxv) |
| 720 | (xxvii) 34.25 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- |
| 721 | (ii) 34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 34.37 B Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2 mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 722 | (iii) |
| 723 | (iv) 34.38 C Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections. |
| 724 | (iii) |
| 725 | (ix) 34.38 A Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- |
| 726 | (vii) B. Earthing: 34.13 (xiv) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. To make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). |
| 727 | 34.13 (xx) C. Wiring, Lighting & Accessories (for Panel room, Pump House): 34.04 RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES : Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 728 | (i) b |
| 729 | (vi) 34.09 (xiii) Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 730 | (c.) 34.17 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB\"s/RCBO\"s/ RCCB\"s: Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with rovision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc. |
| 731 | (iii) 34.16 A MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 732 | (vi) 34.29 B Single Arm Brackets for GI Pipe Pole: (i) Supply and erection of GI pipe 40mm dia (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105 deg., the bracket should be fixed on top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect approved by Engineer- in -charge at site:- |
| 733 | (a) Capital Works \"CSR based Electrical, Instrumentation & PLC Items (In Rs) 463563.95 0.0535 24800.671325 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works \"CSR based Electrical, Instrumentation & PLC Items after adding 5.35% (In Rs) 488364.621325 2.Capital Works \" Non-CSR based Items A. LT Panel with Starter: |
| 734 | NS B. LT Cables & Accessories: RUIDP ISOR 2023, 60.4 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 2.5 Sq. mm (Ref: 60.4.2) |
| 735 | C. C. Earthing: RUIDP ISOR 2023, 63.5 Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 736 | D. D. Wiring, Lighting & Accessories (for Panel room, Pump House): |
| 737 | NS RUIDP ISOR 2023, 66.4 Providing & Fixing of IP20, 2\"x2\" LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in- charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . Surface Mounting (Ref: 66.4.2) |
| 738 | RUIDP ISOR 2023, 64.12 RUIDP ISOR 2023, 64.12 Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 739 | RUIDP ISOR 2023, 64.11 RUIDP ISOR 2023, 64.11 Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 740 | RUIDP ISOR 2023, 67.12 RUIDP ISOR 2023, 67.12 Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR. |
| 741 | E. E. Level Transmitter, PLC, Pressure Gauge, Cables: RUIDP ISOR 2023, 43.27 Supply, Installation, testing and commissioning of Battery Operated Ultrasonic Level Transmitters with an accuracy of ± 0.25% of full sacle, ingress protection IP 65, MOC electronic enclosure Aluminium die cast/SS316, battery life of min. 5 years, LCD display 8 X 1 character as per technical specifications |
| 742 | RUIDP ISOR 2023, 47.1 RUIDP ISOR 2023, 47.1 Design, Manufacture, Supply, Installation, Testing andCommissioning of Indoor type PLC Panel of size approx. 800 mm X500 mm X 2000mm (LBH) , Fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration, necessary programming software for PLC & SCADA and comprising of all accessories not limited to the following: DI No. 30DO No. 26AI No. 6AO No. 2MCB 16A DP No. 2MCB 6A DP No. 6SMPS 100-240VAC/ 4.5A / 24 VDC No. 1Selector Switch (Auto/Manual) & Local / Remote No. 2Control Relays Lot 1Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with No. 1Electronic Hooter No. 1Control Transformer 200VA No. 1Emergency STOP Push Button No. 1Panel Cooling Fan & Filter No. 2Panel Light with Door Switch, 7W No. 1 |
| 743 | RUIDP ISOR 2023, 73.41 RUIDP ISOR 2022, E111500 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111540) |
| 744 | RUIDP ISOR 2022, E111400 RUIDP ISOR 2022, E111400 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (inner sheated GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel armoured overall PVC sheathed (ST-1) overall screened Core armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111440) |
| 745 | Capital Works \"Non CSR based Electrical, Instrumentation & PLC Items (In Rs) 1507400.0 Total : Part - C (Electrical, Instrumentation & PLC) CSR + Non CSR Amount : (Rs) 1995764.621325 Electrical, Instrumentation & PLC Works for Clear Water Pump House, Water Suppy- Mudki Sr.No. Item No. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs.) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: 1. Capital Works \" CSR based Items B. LT Cables & Accessories: 34.10 A XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- |
| 746 | (xxx) 34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 747 | (xxx) |
| 748 | (xxxv) 34.25 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- |
| 749 | (ii) 34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 34.37 B Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2 mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 750 | (iii) |
| 751 | (iv) 34.38 C Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections. |
| 752 | (iii) |
| 753 | (xii) 34.38 A Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- |
| 754 | (iii) |
| 755 | (xii) C. Earthing: 34.13 (xiv) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. To make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). |
| 756 | 34.13 (xx) D. Wiring, Lighting & Accessories (for Panel room, Pump House): 34.04 RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES : Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 757 | (i) b |
| 758 | (vi) 34.09 (xiii) Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 759 | (c.) 34.17 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB\"s/RCBO\"s/ RCCB\"s: Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distribution board with rovision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc. |
| 760 | (iii) 34.16 A MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 761 | (vi) 34.29 B Single Arm Brackets for GI Pipe Pole: (i) Supply and erection of GI pipe 40mm dia (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105 deg., the bracket should be fixed on top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect approved by Engineer- in -charge at site:- |
| 762 | (a) Capital Works \"CSR based Electrical, Instrumentation & PLC Items (In Rs) 379917.65 0.0535 20325.594275 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works \"CSR based Electrical, Instrumentation & PLC Items after adding 5.35% (In Rs) 400243.244275 2.Capital Works \" Non-CSR based Items A. LT Panel with Starter: |
| 763 | NS RUIDP ISOR 2023, 44.6 SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus. |
| 764 | B. B. LT Cables & Accessories: RUIDP ISOR 2023, 60.4 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 2.5 Sq. mm (Ref: 60.4.2) |
| 765 | C. C. Earthing: RUIDP ISOR 2023, 63.5 Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 766 | D. D. Wiring, Lighting & Accessories (for Panel room, Pump House): |
| 767 | NS RUIDP ISOR 2023, 66.4 Providing & Fixing of IP20, 2\"x2\" LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in- charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . Surface Mounting (Ref: 66.4.2) |
| 768 | RUIDP ISOR 2023, 64.12 RUIDP ISOR 2023, 64.12 Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 769 | RUIDP ISOR 2023, 64.11 RUIDP ISOR 2023, 64.11 Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 770 | RUIDP ISOR 2023, 67.12 RUIDP ISOR 2023, 67.12 Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 771 | E. E. Level Transmitter, Magnetic Flow Meter, PLC, Pressure Gauge, Cables: RUIDP ISOR 2023, 43.27 Supply, Installation, testing and commissioning of Battery Operated Ultrasonic Level Transmitters with an accuracy of ± 0.25% of full sacle, ingress protection IP 65, MOC electronic enclosure Aluminium die cast/SS316, battery life of min. 5 years, LCD display 8 X 1 character as per technical specifications |
| 772 | RUIDP ISOR 2023, 43.28 RUIDP ISOR 2023, 43.28 Supply, Installation, testing and commissioning of Battery powered Electromagnetic flow meters with GSM/GPRS based with an accuracy of ± 1% of measured value, ingress protection Electronics IP 66 and flow tube IP 68, MOC: lining Neoprene rubber/Hard rubber/PTFE, Flange - SS316/SS304/MS/CS, Electrode - SS 316/Hastalloy, Coil Housing - SS, battery life of min. 5 years, LCD display 5 digit for instantaneous flow and 9 digit for Totalized flow as per technical specifications of following sizes: |
| 773 | RUIDP ISOR 2023, 47.1 RUIDP ISOR 2023, 47.1 Design, Manufacture, Supply, Installation, Testing andCommissioning of Indoor type PLC Panel of size approx. 800 mm X500 mm X 2000mm (LBH) , Fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration, necessary programming software for PLC & SCADA and comprising of all accessories not limited to the following: DI No. 30DO No. 26AI No. 6AO No. 2MCB 16A DP No. 2MCB 6A DP No. 6SMPS 100-240VAC/ 4.5A / 24 VDC No. 1Selector Switch (Auto/Manual) & Local / Remote No. 2Control Relays Lot 1Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with No. 1Electronic Hooter No. 1Control Transformer 200VA No. 1Emergency STOP Push Button No. 1Panel Cooling Fan & Filter No. 2Panel Light with Door Switch, 7W No. 1 |
| 774 | RUIDP ISOR 2023, 73.41 RUIDP ISOR 2022, E111500 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111540) |
| 775 | RUIDP ISOR 2022, E111400 RUIDP ISOR 2022, E111400 Providing and laying Stranded/ Flexible Annealede Bare copper conductor XLPE/PVC insulated suitably laid up together overall polyster taped Al (inner sheated GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel armoured overall PVC sheathed (ST-1) overall screened Core armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. 1.5 sq.mm (Ref; E111440) |
| 776 | Capital Works \"Non CSR based Electrical, Instrumentation & PLC Items (In Rs) 1892633.0 Total : Part - C (Electrical, Instrumentation & PLC) CSR + Non CSR Amount : (Rs) 2292876.244275 Electrical Works for Sub-Station, Water Suppy- Mudki Sr.No. Item No. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs.) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: 1. Capital Works \" CSR based Items A. HT Cables & Accessories: 34.36 XLPE INSULATED HT CABLES: 34.36 A XLPE INSULATED HT ARMOURED CABLES (UNDERGROUND): Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:- |
| 777 | (viii) 34.36 C S/E of Heat shrinkable cable end termination/ Straight through joint kit for 11 KVA /6.6 KV (E) XLPE Cables as approved & desired by Enginer in charge:- |
| 778 | (viii) B. LT Cables & Accessories: 34.10 A XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- |
| 779 | (xxxvii) |
| 780 | (xxxi) 34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 781 | (xxxvii) |
| 782 | (xxxi) 34.25 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- |
| 783 | (ii) 34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 34.37 B Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2 mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 784 | (iv) 34.38 C Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections. |
| 785 | (iii) |
| 786 | (xiii) 34.38 A Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- |
| 787 | (xi) C. Earthing: 34.13 (xiv) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. To make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). |
| 788 | 34.13 (xx) Capital Works \"CSR based Electrical, Instrumentation & PLC Items (In Rs) 699358.7000000001 0.0535 37415.69045 Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works \"CSR based Electrical, Instrumentation & PLC Items after adding 5.35% (In Rs) 736774.3904500001 2.Capital Works \" Non-CSR based Items A. HT System: |
| 789 | RUIDP ISOR 2023, 72.4 |
| 790 | RUIDP ISOR 2023, 72.4 |
| 791 | RUIDP ISOR 2023, 72.7.2 |
| 792 | RUIDP ISOR 2023, 72.7.3 RUIDP ISOR 2023, 72.2 SITC of star rated Aluminium wound distribution Transformer of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & as per BEE star - 1 & BIS approved as per IS 2026- 1977 & losses as defined as per 2014 (Fourth Revision) Level-1 . including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C upto 200 KVA & 40-45 degree C for above 200 KVA, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect .The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR. |
| 793 | B. B. LT Panels: |
| 794 | NS C. DG Set & AMF Panel: RUIDP ISOR 2023, 72.17 SITC of Radiator Cooled and Turbo charged Silent DG Set (As per latest CPCB emission norms) having specifications as per A, B, C, D, E, F,G,H & IA) 1500 RPM Diesel Engine conforming to BS:649/5514 of suitable BHP (up to 82.5 kVA 6 cylinder or Below required, 125 kVA & Above ratings 6 cylinder or above required ) capable of taking 10% over loading for one hour after 12 hours of continuous operation., Dry exhaust mainfold with Hospital grade silencer and catalytic convertor(isolated from main DG chamber), up to 3 M exhaust piping (with LRB insulation & Alum. cladding ) as required .B) AC Brush less SPDP Alternator conform to BS 5000 (part 99) or IS/IEC 60034-1. . Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage, under speed warning & shutdown).Engine & Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupledC) CPCB / ARAI approved Standard canopy with Weatherproof, powdercoated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with sidewall fabricated from 1.6 mm CRCA sheet & filled with glasswool (96Kg/m3) / Foam. as per IS8183 the doors of 28/40/50/85mm thick as perrating and fabricated from 1.6mm CRCA sheet packed with accoustic material, All doors/opening are sealed with neoprene /EPDNgaskets. The DG Set has Inbuilt / External in fuel tank to run 6 to 8 Hrs as per OEM standard, with protection and tripping of DG set against temperature of more than 50 degree centigrade.D) Electronic / Mechanical governor, Manual & electric Start ,Batteries with battry charger, Engine instruments panel,AVM pads All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Panel mounted MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dB at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity :E) (i) Accoustic glass wool wall thickness should not be less then 40mm and not less then 20mm PU foam upto rating 100 KVA. (ii).Accoustic glass wool wall thickness should not be less then 65mm and not less then 50mm PU foam upto rating 250 KVA. (iii)Accoustic glass wool wall thickness should not be less then 100mm for rating above 250 KVA.F) First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactor by department.G) Servicing Contract of DG Set from OEM\"s Authorised Service Dealer as per OEM guidelines during the DLP period shall be done by contractor including all consumables, actual charges shall be reimbursed to the contractor by End User Department.H) Manufacturer / OEM must have its authorized service dealer in Rajasthan. Which can provide service within 6 Hours of compalint registration.I) DG set will be offered for Inspection and Testing at Manufacturer\"s Works in presence of Departmental Engineers. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 795 | RUIDP ISOR 2023, 72.29 RUIDP ISOR 2023, 72.29 SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: Appropriate Test Certificate/ report of product/accessories from OEM/Panel Manufecturer shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 796 | NS D. Earthing: RUIDP ISOR 2023, 63.5 Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 797 | E. E. Outdoor Lighting: RUIDP ISOR 2023, 67.7 Supply installation testing & Commissioning of high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by piecewise single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, Stainless steel 6 mm dia. wire ropes (AISI 316, 7 / 19 costruction 3 no. rope for lantern carrage & 2 no. rope for winch assembly ) foundation bolt, torque limiter,EPR insulated PCP sheathed 5 core x 2.5 Sq.mm trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135.etc. as required on Existing Foundation. ( See table P - 03 for specs.) OEM Must have Type test certificate for wind tunnel test . All as per pre approved by Engineer in-charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR. |
| 798 | RUIDP ISOR 2023, 67.11 RUIDP ISOR 2023, 67.11 Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR. |
| 799 | Capital Works \"Non CSR based Electrical, Instrumentation & PLC Items (In Rs) 4883321.0 Total : Part - C (Electrical, Instrumentation & PLC) CSR + Non CSR Amount : (Rs) 5620095.39045 SCADA for Intake, Raw & Clear water Pumping Station, WTP & Sub-Station- Mudki Sr.No. Item No. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs.) Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site: Capital Works \" Non-CSR based Items |
| 800 | RUIDP ISOR 2023, 47.14 Capital Works \"SCADA Items (In Rs) 4339666.0 Total : Part - C (SCADA ) Non CSR Amount : (Rs) 4339666.0 5 years’ Operation and Maintenance (Part-2) at Mudki Town, District Ferozepur, Punjab under AMRUT 2.0 Scheme 5 Years\" Operation & Maintenance Cost (PART 2) S. No. Period Unit Total Qty Rate Amount in Rs Amount In words (In Rupees) (In Rs) |
| 801 | Construction period (30 Months) |
| 802 | 1st Year. |
| 803 | 2nd Year. |
| 804 | 3rd Year. |
| 805 | 4th Year. |
| 806 | 5th Year. Total 5 Years\" O&M in Rs 31844208.0 Three Crores Eighteen Lacs Forty Four Thousand Two Hundred Eight Rupees and No Paise |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
