|
| 1 | Almirah Large Steel (FD-1031 , FD-1033 and FD/E6/MAP/18) |
| 2 | S&F leg made of 1mm thick MS sheet as per drg and specification, including removing unserviceable leg from Almirah large steel complete all as specified and directed. |
| 3 | S&F shelfmade of 1mm thick MS sheet as per drg and specification, including removing unserviceable shelf from Almirah large steel complete all as specified and directed. |
| 4 | S&F 3 way locking device as per existing pattern of drg and specification, including removing unserviceable 3 way locking devicefrom Almirah large steel complete all as specified and directed. |
| 5 | S&F new cleats as per drg and specification, including removing unserviceable cleatsfrom Almirah large steel complete all as specified and directed. |
| 6 | S&F new locks of approved make as per drg and specification, including removing unserviceable locks from Almirah large steel complete all as specified and directed. |
| 7 | S&F new CP handle and appropriate bush as per drg and specification, including removing unserviceable CP handle from Almirah large steel complete all as specified and directed. |
| 8 | M&L for preparation of inner and outer surface of Almirah large steeland filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paintOlive Green colour complete all as specified and directed. |
| 9 | Almirah Medium steel (FD-1032) |
| 10 | S&F leg made of 1mm thick MS sheet as per drg and specification, including removing unserviceable leg from Almirah medium steel complete all as specified and directed. |
| 11 | S&F shelfmade of 1mm thick MS sheet as per drg and specification, including removing unserviceable shelf fromAlmirah medium steel complete all as specified and directed. |
| 12 | S&F 3 way locking device as per existing pattern of drg and specification, including removing unserviceable 3 way locking devicefromAlmirah medium steel complete all as specified and directed. |
| 13 | S&F new locks of approved make as per drg and specification, including removing unserviceable locks fromAlmirah medium steel complete all as specified and directed. |
| 14 | S&F new CP handle and appropriate bush as per drg and specification, including removing unserviceable CP handle fromAlmirah medium steel complete all as specified and directed. |
| 15 | M&L for preparation of inner and outer surface of Almirah med steeland filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paintOlive Green colour complete all as specified and directed. |
| 16 | Locker Bedside Steel (FD-1029) |
| 17 | S&F leg made of 1mm thick MS sheet as per drg and specification, includingremoving unserviceable leg from locker bed side steel complete all as specified and directed. |
| 18 | S&F new CP hanging rod 18mm as per drg and specification, including removing unserviceable hanging rod complete all as specified and directed. |
| 19 | S&F new hasp and staple size 100mm of best quality be fixed with appropriate nut and bolt as per drg and specification, including removing unserviceable hasp and staple complete all as specified and directed. |
| 20 | S&F new CP handle 100mm of best quality be fixed with appropriate screw as per drg and specification, including removing unserviceable handle complete all as specified and directed. |
| 21 | M&L for preparation of interior and exterior surfaces of locker bed side steel andfillingwith metal putty and denting and applying one coat of synthetic enamel paint OG colour complete all as specified and directed. |
| 22 | Spot welding shall be done asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 23 | Bed hard 6\"x3\" with hard topFD/E6/MAP/08(R) |
| 24 | S&F new plywood 12mm thickness commercial BWR with appropriate nut and bolt as per existing and S&F new rubber shoes of best quality as approved, rest all as per drg and specification and apply one coat of paint black synthetic enamel, including removing unserviceable plywood from bed hard 6\"x3\" complete all as specified and directed. |
| 25 | Charpoy GI Pipe 32mm with plywood top (FD-220) |
| 26 | S&F MS flat iron 40mmx3mm each 2 Nos welded as per existing pattern and new plywood as per drg 12mm thickness BWR of approved make with appropriate 6mm screw headless as directed by Engineer-in-charge, including removing unserviceable plywood and MS flat iron from charpoy GI pipe and tightening the frame complete all as specified and directed. |
| 27 | S&F new long rail as per drg and specification, includingremoving unserviceable long rail from charpoy GI 32mm bore complete all as specified and directed. |
| 28 | M&L for removing unserviceable short rail and made short rail from unserviceable long rail removed from existing charpoy and fix as per drg and specification complete all as specified and directed. |
| 29 | M&L for removing unserviceable leg and made leg from unserviceable short rail removed from existing charpoy and fix arrangement for mosquito frame holder as per drg and specification complete all as specified and directed. |
| 30 | S&F new elbow 32mm of approved make as per drg and specification, including removing unserviceable elbow from charpoy GI complete all as specified and directed. |
| 31 | S&F new check nut 8mm as per drg and specification, including removing unserviceable check nut from charpoy GI complete all as specified and directed. |
| 32 | Charpoy T/S for OR with ply top (CECZ-FD 77/ FD/E6/MAP-II/01) |
| 33 | S&F new plywood 12mm thickness commercial BWR with appropriate nut and bolt as per drg and specification, including removing unserviceable plywood from Charpoy T/S for ORS complete all as specified and directed. |
| 34 | M&L for clean the surfaces of Charpoy and apply one coat of synthetic enamel paint black complete all as specified and directed. |
| 35 | S&F shoes rubber of superior quality complete all as specified and directed. |
| 36 | Chair CB steel with arms (FD-75M) |
| 37 | M&L for removing unserviceable seat and back from chair CBA steeland clean the surface and apply one coat synthetic enamel paint OG as per drg and specification complete all as specified and directed. |
| 38 | S&F seat with appropriate screw to chair CBA steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed. |
| 39 | S&F back with appropriate screw to chair CBA steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed. |
| 40 | S&F new arm rest as per drg and specification, including removing unserviceable arm rest complete all as specified and directed. |
| 41 | Chair CB steel without arms (FD-75M) |
| 42 | M&L for removing unserviceable seat and back from chair CBB steel without arms and clean the surface and apply one coat synthetic enamel paint OG as per drg and specification complete all as specified and directed. |
| 43 | S&F seat with appropriate screw to chair CBB steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed. |
| 44 | S&F back with appropriate screw to chair CBB steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed. |
| 45 | Chair Verandah (FD-256 & FD-259) |
| 46 | M&L for apply one coat of synthetic enamel paint, white colour, with entire satisfaction and caning with 4mm wide cane of approved make in mate pattern and new rubber shoes of best quality as per drg and specification, including removing unserviceable cane from chair verandah and clean the surface with steel brush complete all as specified and directed. |
| 47 | Spot welding shall be done to Chair Verandah asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 48 | Table Office Officer Steel (FD-84/1003) |
| 49 | M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OGcomplete all as specified and directed. |
| 50 | S&F new top made out of 18mm thickness Prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table office Offr steel complete all as specified and directed. |
| 51 | Spot welding shall be done to Table Office Officers Steel asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 52 | Table Office Clerk Steel (FD-84/381/1004) |
| 53 | M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint OGcomplete all as specified and directed. |
| 54 | S&F new top made out of 18mm thick Prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table Clk steel complete all as specified and directed. |
| 55 | Spot welding shall be done to Table office Clerk steel asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 56 | Table 3\"x3\"x760mm Steel (FD-1009) |
| 57 | S&F new top made out of 18mm thickness Prelaminated particle board beaded with 4mm thick teak wood beadingincludingapply French polish as per drg and specification, including removing unserviceable top from table 3\"x3\" steel complete all as specified and directed. |
| 58 | M&L for preparation the surface and apply one coat of synthetic enamel paint OG in entire satisfaction complete all as specified and directed. |
| 59 | Spot welding shall be done to Table 3\" x 3\" steel asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 60 | Teapoy verandah (FD - 255/383) |
| 61 | S&F new top made of Prelaminated particle board 18/19mm thickness and 4mm teak wood beading with polishing to beading around the top as per drg and specification and apply one coat of paint enamel white, including removing unserviceable top from Teapoy verandah complete all as specified and directed. |
| 62 | Spot welding shall be done to Teapoy Verandah asrequired as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 63 | Teapoy verandah, (FD/E6/MAP/17) |
| 64 | S&F new top made of Prelaminated particle board of size 750mm x 450mm with 18 mm thickness and along with PVC edging with screws as specified in drg and specifications and apply one coat of paint enamel black, including removing unserviceable top from Teapoy verandah complete all as specified and directed. |
| 65 | Table dining for OR\"s (FD-165) |
| 66 | S&F new top made out of 18mm thickness Prelaminated particle board beaded with 4mm thick teak wood beadingincludingapplying French polish as per drg and specification, including removing unserviceable top from table dining OR\"s complete all as specified and directed. |
| 67 | M&L for preparation the surface of Table dining OR and apply one coat of synthetic enamel paint OG in entire satisfaction complete all as specified and directed. |
| 68 | Spot welding shall be done asrequired to Table dining OR\"s as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
| 69 | Rack six tier Adjustable steel (FD-106 (M)) |
| 70 | M&L for preparation of interior and exterior surfaces of Rack adjustable steel andfillingwith metal putty wherever required and denting and applying one coat of synthetic enamel paint OG complete all as specified and directed. |
| 71 | Spot welding shall be done asrequired to rack as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed. |
