|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L for Cement concrete type D-21:4:8(using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | S&F 10 mm thick pavertiles out door vitrified tiles area 0.20 to .50 sqm each asin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 20mm thick screed in CM(1:6)complete all as specified and directed. |
| 6 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 7 | M&L for RCC(Design mix M-25) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item. |
| 8 | M&L for RCC(Design mix M-25) in Chajja complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 9 | M&L for RCC(Design mix M-25) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.. |
| 11 | Use and waste formwork fair finish surface of concrete formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed |
| 12 | Use and waste formwork fair finish surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. complete all as specified and directed |
| 13 | Use and waste formwork fair finish surface of concrete to chullah hoods, chajjas, troughs and similar items includinged etc. complete all as specified and directed |
| 14 | S&FTMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 15 | M&L for 25 mm thick PCC 1:2:4 Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed |
| 16 | Supply only Integral waterproofing compoundcomplete all as specified and directed |
| 17 | M & L water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacterer/authorized applicator of the manufactrrer incl taking down of existing roof treatment properly cleaning & drying the concrete surface complete all as specified and directed. |
| 18 | M & L for 10mm thick rendering on roof surface/concrete surface in CM 1:4complete all as specified and directed |
| 19 | M & L for a coat of oxidised bitumen based solvent primer @ 0.3kg/sqmcomplete all as specified and directed |
| 20 | M & L for APP 3mm thick unrolled over the bitumen coated surface polymeric water proofing membrane Hyperplas standard wt not less than 3kg/sqm with 100mm over laps shall be sealed by flame as per manufactures instruction completely all as specified and directed. |
| 21 | M & L for two coat of bituminous base aluminium paint including preparation complete all as specified and directed. |
| 22 | M & L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and directed. |
| 23 | M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone agreegate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 24 | M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement. complete all as specified and directed. |
| 25 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 26 | Labour ,T & P for complete removal of existing treatment on wall complete all as specified and directed. |
| 27 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sandind of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dustetc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coatthe prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 28 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. as per manufacturer instructions apllied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint,completeall as specified and directed. |
| 29 | M&L two coat of synthetic enamel pinting over and including a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed. |
| 30 | M&L one coat of synthetic enamel pinting over prepared old steel surface over 10 cm width or girth complete all as specified and directed. |
| 31 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 32 | M&L Cudappah stone slab on platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipecomplete all as specified and directed |
| 33 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, fillingthe joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed. |
| 34 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and directed |
| 35 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including screed bed 20 mm thick in CM 1:4 complete complete all as specified and directed. |
| 36 | Taking down chowkhat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sqm eachcomplete all as specified and directed |
| 37 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 38 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per directioncomplete all as specified and directed |
| 39 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification complete all as specified and directed |
| 40 | M & L for factory made solid panel PVC door shutter 30 mm thick (style)manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plaincolour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawingscomplete all as specified and directed |
| 41 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedtype B-21complete all as specified and directed |
| 42 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodisedcomplete all as specified and directed |
| 43 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloycomplete all as specified and directed |
| 44 | S&F 200mm longAluminium,anodized barrel tower bolts of extruded section and fixedcomplete all as specified and directed |
| 45 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staplescomplete all as specified and directed |
| 46 | S&F 5.5 mm thick frosted glass, ordinary quality and glazing with oil putty of any size panecomplete all as specified and directed. |
| 47 | M&L in repair Vitreous China Urinal, Half stall type, whitewith grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipecomplete all as specified and directed. |
| 48 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and directed |
| 49 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 50 | M&L Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket seat cover etc. (including flushing cistern & flush pipe)complete all as specified and directed |
| 51 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed |
| 52 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed |
| 53 | S&F15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making goodcomplete all as specified and directed. |
| 54 | S&F 25 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 55 | S & F forbevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and directed |
| 56 | S&FVitreous China wash basin, angle back, oval shapewhite, excluding taps, waste, chain and plug and porcelain stopper but including bracketsincluding Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed |
| 57 | M&L for brick work with flyash bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:6 as in half brick thick wall complete all as specified and directed. |
| 58 | S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixedcomplete all as specified and directed |
| 59 | S & FBrass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges including taking down the existing towel railcomplete all as specified and directed |
| 60 | S&FChromium platedtoilet paper holderincluding fixing arrangement complete all as specified and directed . |
| 61 | M&LPVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all asspecified and directed . |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed |
| 63 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm /450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surfacecomplete all as specified and directed |
| 64 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch the shade of tile over and including 20 mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed. |
| 65 | S&F 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe,complete all as specified and directed. |
| 66 | S&F 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 67 | S&F 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 68 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 69 | S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed |
| 70 | S&F 110mm borePVC (SWR) bends any radiuscomplete all as specified and directed |
| 71 | S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radiuscomplete all as specified and directed |
| 72 | S&F 110mm borePVC (SWR) junction double, (double T) equal or unequal any radius complete all as specified and directed |
| 73 | S&F 110mm borePVC (SWR) cowl any radiuscomplete all as specified and directed |
| 74 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 75 | S&Ffor 75 mm dia PVC (SWR ) bends and radiuscomplete all as specified and directed |
| 76 | S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in positionincluding taking down existing water tank complete all as specified and directed. |
| 77 | S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 78 | S&F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleatcomplete all as specified and directed |
| 79 | S&F Cupboars/Wardrobe of Factory made single extruded WPC (Wood Polymer Composite) 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed |
| 80 | S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanisedwidth of flaps (when open) 30 mm complete all as specified and directed. |
| 81 | S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 82 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,etc. not exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed. |
| 83 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in any type of soil complete all as specified and directed. |
| 84 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 85 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes for 150 mm bore SWG pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 86 | Supplying, laying and jointing for 150-160mm nominal dia DWC pipes class SN-4 conforing to IS -16098:2013 Part-I stiffness with and incl necessary jointing materials complete all as specified and directed. |
| 87 | Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 88 | Dismantling wooden scantlingin fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 89 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 90 | M&L for PCC 1:3:6 type C2 cement concrete using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 91 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed. |
| 92 | M&L for cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 93 | M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 94 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 95 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 96 | M&L in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 97 | Fixing only Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed.Note :- Old sheet shall be re-used retrived from item No. 89 above |
| 98 | Taking down copper/aluminium point wiring(light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceilingroses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc.casing caping complete all as specified and directed. |
| 99 | Taking down exahaust fan,by dismantling all electric connection which becomes unserviceable andrequiredrewinding and paintingand deposit to MES store yard for further disposal complete all as specified and directed. |
| 100 | M&L for point wiringfor light/fan/bell/5A sococket point with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and includingcontinuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc andmaking good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light/bell/fan/ 5A socket complete all as specified and directed. |
| 101 | S&F switch modular 5 amps, flush type, ISI marked complete all as specified and directed. |
| 102 | S&F modular socket 2/3 pin combined, 5 amps 2 module, flush type, ISI marked complete all as specified and directed. |
| 103 | S & F ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 104 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 105 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 106 | S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | S&F exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame and louvers |
| 108 | S&Fsheet metal enclosure MCB DB double doorsingle pole and neutral, 240 volts,4way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 109 | S&F MCB Single Pole and Neutral 240Volt, 32Amps, \"C\"series,10KA breaking capacity complete all as specified and directed. |
| 110 | S&F MCB Single Pole 240Volt, 6-32 SAmps,10KA breaking capacity complete all as specified and directed. |
| 111 | S & F LED Security Light Luminaire 25 wattwith 2500 or more lumen warm white, surge protection device upto 4KV, IP65/66 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 25 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat , nutsand boltsand painting with aluminium paint. complete all as specified and directed.Make: Philipscat part no: BRP029 LED25/WW MRPSU GR DX orequivalent in Crompton/Havells/GE |
| 112 | M & L for earthing complete for various equipments with galvanised steel earth plate electrode600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.Iwire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 113 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade,4 Core X 10 SqmmXLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed :- |
| 114 | Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified and directed. Note : Punned thickness of sand shall be measured & paid. |
| 115 | Supplying and laying reinforced precast concrete cable cover, class LV Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed. |
| 116 | Schedule of credit of Amount Rs. 22,535.00to be deducted during AOC. |
