|
| 1 | Supplying, Installation, Testing and Commissioning of Machines & Equipment for Mechanical Engineering Department at TTAADC Polytechnic Institute, Khumulwng, West Tripura for the Project \"Improvement of Infrastructure in TTAADC Polytechnic Institute, Khumulwng, West Tripura District Under Higher Education Department\" under the NEC Scheme. |
| 2 | Oxyacetylene gas welding complete setTechnical Specifications: oxygen cylinder, acetylene cylinder, equipment with hoses pipe, regulator hose clamp, lungs for cable, flash back fire arrestor, cylindrical key gas lighter, tip cleaner, welding torch, different tips, cylinder stand and all other required accessories. (All are referred as 1 Set) * Operating Manual in hard copy and soft copy encrypted in CD. |
| 3 | Tungsten inert gas welding (TIG)Technical Specifications: Current: 5-300 Amp, Base current:5-90%, Voltage: 70 V, Forced air cooling type, Duty cycle: Input 100 % output 100 %, Frequency: 50/60 Hz, pre and post flow of gas for superior welding, 3 phase input, water cooling phase 1, LED display, 230 output voltage, PWM and IGBT Technology along with all other required accessories. (All are referred as 1 Set)* Operating Manual in hard copy and soft copy encrypted in CD |
| 4 | Surface planer machineTechnical Specifications: Surface Planer Machine complete with 2 H.P., 440 volts, 1440 RPM Electric Motor, Starter, Vee belts, hand tool set and safety guards.Surfacing capacity : 300mmLength of surface table : 1220mmRebating Capacity : 12.5Cutter block diameter : 95mmCutter Block Speed (RPM : 4000Circular Saw Table size : 560x280mmUp/Down Movement of circular saw table : 75mmMax. Circular Saw Diameter : 300mmThe model need to be supplied along with all necessary accessories. * Operating Manual in hard copy and soft copy encrypted in CD |
| 5 | Electric wood planerTechnical Specifications: Rated input power : 650WPlaning width : 82mmPlaning depth : 0–2.6mmAdjustable rebating depth : 0 to 9mmNo-load speed : 16,500rpmTool dimensions (width) : 158mmTool dimensions (length) : 280mmTool dimensions (height) : 140mmWeight: 2.800kgThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD. |
| 6 | Surface cum thickness planerTechnical Specifications: Surface cum Thickness Planer with Circular saw attachment complete with 3 H.P.,440 volts, 1440 RPM Electric Motor, Starter and Vee belts, 3 Pcs. Planning Knives and 01 Circular saw blade.Surfacing capacity : 330 or MoreMax. planning width : 330 or MoreThicknessing capacity : 175 or MoreLength of surface table : 1200mmRebating Capacity : 12Length Of Thickness Table : 650mmMin. length of work piece for thicknessing : 250mmFeeding Speed (feet per minute) : 24Cutter block diameter : 100Cutter Block Speed (RPM) : 4000Circular Saw Table size : 550x300Up/Down Movement of cir.saw table : 75Max. Circular Saw Diameter : 300mm* Operating Manual in hard copy and soft copy encrypted in CD |
| 7 | Manual Spinning Rolling MachineTechnical Specifications: Length of bed: 1828 mm, Height of centre: 381 mm, Diameter of spindle: 98 mm, Width of bed: 305 mmThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 8 | Pillar drilling machineTechnical Specifications:● Main spindle and pinion made of EN Steel by forging● Column, arm, work Head & Gears made from finest closed grain cast iron, whilespindle Ram thin alloy steel.● Main spindle run out is checked for accuracy as per IS : 2199● For the smooth sliding of arm, special slide retiever slots, are givenTechnical Specification :-Working table : 360˚Drilling Capacity : 19mmPillar Diameter : 74.30mmSpindle Nose to table distance : 660mmDistance from spindle centre to pillar surface : 200mmTable Travel : 200mmTaper in Spindle : MT-02Number of Speed : 8Range of Speed : 87 to 3224 (RPM)Table Size : 480x300mm, Base Size : 490x310mmSpindle Travel : 130mmPillar Length : 1170mmOverall Height with Pulley guard V-Belt Section : 1420mmInner Size : 1440mmWeight : 100 Kg. (Approx.)The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD. |
| 9 | Black smith forge with blowerTechnical Specifications: Forge size: 4’×2’×2.6’’ with following parts: Legs, plate form, body, nozzle, water tank, black plate, valve, Coal tank, hood, chimney etc. Blower with motor: blower size 2’,Motor 2 HP, 2860 rpm, 440 Volt,3 phase |
| 10 | WorkbenchesTechnical Specifications:Welding Table FEATURES : • Welding Table with Length =900 mm, Width = 600 mm, Height= 750mm • Heavy Duty M.S. Structure with Angle 45 x 45 x 6 mm |
| 11 | AnvilTechnical Specifications:Made of wrought iron or Cast iron with smooth surface. Capacity of 50KG |
| 12 | AnvilTechnical Specifications:Made of wrought iron or Cast iron with smooth surface. Capacity of 100KG |
| 13 | Sledge hammer with handleTechnical Specifications:10 Lbs |
| 14 | Sledge hammer with handleTechnical Specifications:12 Lbs |
| 15 | Ball peen Hammer with HandleTechnical Specifications:3 Lbs |
| 16 | Ball peen Hammer with HandleTechnical Specifications:2.5 Lbs |
| 17 | Cross peen hammer with HandleTechnical Specifications:500 Gms |
| 18 | Swage block cast ironTechnical Specifications:18\" X 18\" X 6\" OF CAST IRON MATERIAL |
| 19 | Blacksmith tongs set of five different typesTechnical Specifications: Made from good quality alloy steel. (One Set Comprises of five nos different size tongs) |
| 20 | Heavy duty bench viceTechnical Specifications: 10\" AND ABOVE MADE OF FORGED STEEL |
| 21 | Flatter HammerTechnical Specifications: Made of high carbon steel |
| 22 | Welding chipping hammer with rubber gripTechnical Specifications: Made of alloy steel and 370 gm approx |
| 23 | Welding helmetsTechnical Specifications: with polycarbonate lens |
| 24 | Black google for weldingTechnical Specifications: Transparent |
| 25 | Protection glass Technical Specifications:Transparent |
| 26 | Gloves (for welding)Technical Specifications: Leather material |
| 27 | Aprons (for welding)Technical Specifications:Leather Material L SIZE (30) & XL SIZE (30) |
| 28 | Fire extinguishersTechnical Specifications:Made of Aluminium material having 6 kg capacityA Type : Powder |
| 29 | Fire extinguishersTechnical Specifications:Made of Aluminium material having 6 kg capacityB Type- CO2 |
| 30 | Fire extinguishersTechnical Specifications:Made of Aluminium material with having 6 kg capacityElectrical- Powder |
| 31 | Fire bucket with standTechnical Specifications:Fire Bucket Red color (4 Bucket+ Bucket Stand with stand hood) made of mild steel material |
| 32 | Cut Section Model of Four Stroke Single Cylinder Petrol EnginerTechnical Specifications:DESCRIPTION:Cut Section Model of Four Stroke Single Cylinder Petrol Engine The cutting should enable the moving parts are visible (Moving parts like connecting rod, piston, valve & spring, crankshaft, Timing gear / chain etc.)Internal components - timing gears, chain, hardware (bolts & nuts), push rod should be chrome plated Inlet valve & outlet valves should be painted differently. Lubricating System in sectional - oil pump, oil filter, oil chamber. Fuel Supply system in sectional Carburetor, intake manifold. Exhaust system in sectional - exhaust manifold.Clutch and gear box will be sectioned to show the internal gears and clutch systemThe following movable & stationary parts should be visible.• Cylinder head, • Engine block,• Piston, Rings and connecting rod, • Rocker Shaft assembly,• Crank shaft • Timing gear• Valves• Cam shaft, Tappet & push rod,• Oil pump• Gear Box• Clutch Suitable Electric motor drive with reduction gear to be provided to understand moving parts of engine. RGB-LED lighting to show the working of four strokes (inlet in white, compression in blue, power in orange and exhaust in red) should be done for all cylinders. Different color painting to be done for different systems (Intake- Dark blue, Exhaust- Red, Coolant- Light blue, Oil- Yellow, Cut area- Signal red) Necessary parts of engine should be attractively coloured for better understanding. Whole assembly should be mounted on suitable metal stand with lockable caster wheels |
| 33 | Cut Section Model of Two Stroke Single Cylinder Petrol EngineTechnical Specifications:DESCRIPTION:Cut Section Model of Actual Two Stroke Single Cylinder Petrol Engine (Bajaj Scooter) The cutting should enable the moving parts are visible (Moving parts like connecting rod, piston, etc.) Fuel Supply system in sectional Carburetor, intake manifold. Exhaust system in sectional - exhaust manifold.Clutch and gear box will be sectioned to show the internal gears and clutch systemThe following movable & stationary parts should be visible.• Cylinder head, • Engine block,• Piston, Rings and connecting rod, • Crank shaft • Gear Box• Clutch The kicker lever will be provided, by operating the kicker lever the engine can be operated and the internal details can be demonstrated. Different color painting to be done for different systems (Intake- Dark blue, Exhaust- Red, Coolant- Light blue, Oil- Yellow, Cut area- Signal red) Necessary parts of engine should be attractively coloured for better understanding. Whole assembly should be mounted on suitable metal stand with lockable caster wheels. |
| 34 | Model of Air brake system (working)Technical Specifications:DESCRIPTION:Working Model of Air Brake AssemblyThe model represents a fully functional air brake system of a heavy commercial vehicle (truck), demonstrating the complete pneumatic braking operation with all major components integrated on a robust display frame.System Configuration and Components:1. Air Brake System Layout:o Complete air brake circuit simulating the braking system of a heavy-duty truck.o Functional demonstration of service brake, parking brake, and protection systems.2. Primary Components:o Foot Control Valve (Brake Pedal Valve) – for actuation of service brakes.o Dual Air Reservoirs – to store compressed air for primary and secondary circuits.o Air Dryer with Unloader Valve – to remove moisture and regulate system pressure.o Purge Tank – for collection and removal of moisture from the air dryer.o Air Filter – to ensure clean air intake for the compressor.o System Protection Valve – to isolate and protect subsystems from air loss.o Rear Axle Spring Brake Chamber (with Hand Brake Chamber) – for demonstration of spring-applied parking brake.o Hand Brake Valve (Parking Control Valve) – for manual actuation of the parking brake.3. Front Wheel Brake Assembly (Two Nos):o Brake Drumo Brake Liningso Anchor Plateo Wheel Hub Assemblyo Slack Adjustero Brake Camshaft and Cam Rollero Front Brake Chambero Return Springs4. Instrumentation:o Dual Air Pressure Gauges for monitoring front and rear brake circuits independently.5. Pneumatic Connections:o All air lines connected using 12 mm OD flexible polyethylene tubing with quick-connect fittings.o High-pressure lines connected using UHP-rated hose pipes between compressor and air tanks.6. Mounting and Construction:o All components mounted on a sturdy mild steel frame, surface-finished with paint for durability.o Circuit layout displayed on a colour-printed aluminium-cladded organic sunboard, showing schematic diagram with labeled pneumatic circuits for educational and demonstration purposes.o The Air brake system will be provided with 2 HP air compressor to operate the airbrake model. |
| 35 | Cut section unit of Hydraulic brake unit four wheel type Technical Specifications:SPECIFICATION:Cut Section Unit of Hydraulic Brake System (Four-Wheel Type)The model represents a complete hydraulic braking system of a four-wheeled vehicle, designed to demonstrate the principles, construction, and operation of both disc and drum brake mechanisms. The setup uses actual automotive components, sectioned and assembled on a display frame to facilitate practical understanding of the hydraulic circuit and braking dynamics.System Description:The unit illustrates the working of a conventional hydraulic brake system, showing the transmission of hydraulic pressure from the master cylinder to the wheel cylinders during brake application. The combination of front disc and rear drum brakes provides a comprehensive study of both systems within a single model.Technical Specifications:o Fabricated using original automotive brake components, sectioned to display internal construction and functional details.o Mounted on a robust mild steel frame with painted finish for durability and corrosion resistance.o Vacuum assisted hydraulic brake system. The vacuum assisted master cylinder will be connected to a vacuum pump to create vacuum and to understand the effect of vacuum assist on the brake system.o One set of Vaccum assisted Master Cylinder – sectioned to show the piston and fluid displacement mechanism.o And one set will be used for working of the brake system, where fluid can be filled into brake fluid reservoir o Brake Pedal Assembly – to manually operate the hydraulic circuit.o Two Front Hubs with Disc and Caliper Assemblies – for demonstration of disc brake operation.o Two Rear Hubs with Drum and Wheel Cylinder Assemblies – for demonstration of drum brake operation.o One side of the disc and caliper, Drum and wheel cylinder will be sectioned to show the internal details and other set will be made working.o All major parts are color-coded and labeled for easy identification and teaching.o The model will be provided with Colour printed circuit diagram/Parts diagram. |
| 36 | Cut section model of steering gear box Technical Specifications:DESCRIPTION:Cut Section Model of Steering Gear Box (Rack & Pinion Type)The model represents a working cut-section of a rack and pinion steering system, demonstrating the fundamental construction and operational principle of automotive steering mechanisms. The setup uses actual components precisely sectioned and mounted to illustrate the internal working of the system.System Description:The assembly a manual rack and pinion steering system, showing the conversion of rotary motion from the steering wheel into linear motion for wheel steering. All key components are sectioned to expose internal linkages and movement, providing clear visualization of the mechanical interaction.Technical Specifications:o Made using original automotive components sectioned to show internal features such as rack, pinion gear, steering shaft, column, tie rods, and knuckle ends.o Mounted on a heavy-duty mild steel frame for stability during operation and display.o All moving parts remain functional, allowing manual operation to demonstrate steering motion.o The model is manually operated through the steering wheel to simulate the working of the steering mechanism.o Demonstrates how rotary motion of the steering wheel is converted into linear motion of the rack, resulting in wheel angle variation.o A printed circuit diagram/Parts diagram will be provided with naming Along with the above model. |
| 37 | Grease Gun Technical Specifications:Grease Gun 10 Kg. Capacity with Trolley |
| 38 | Exhaust Gas AnalyserTechnical Specifications:Automotive exhaust 5 gas analyser (petrol & Diesel) and Diesel Smoke meter(Optional)Exhaust 5 Gas Analyzer 1 no.Petrol ARAI approved tocheck CO, CO2, O2, and HC& NO. Diesel Smoke Meter ARAI approved.Automotive exhaust gas analyzer (petrol & Diesel) and Diesel Smoke Meter:Measure Range (Resolution),1. CO: 0 ~ 15.000% (0.001%)2. CO2 : 0 ~ 20.00% (0.01%),3. HC : 1 ~20,000ppm (1ppm),4. O2: 0 ~ 25.00% (0.01%),5. NOx : 0 ~ 5000ppm (1ppm).6. Lamda() : 0.200~2.000 (0.001),7. AFR: 7.00 ~ 30 (0.01),Repeatability: Less than,Operational Temperature: 0 ~ 40,Size:(W)260-280mm(D)160- 180mm(H)130-170mm,Wt. 4-5Kg(Main), 1-2Kg(Accessory),Power: 110/220-250V AC 50/60Hz |
| 39 | Oil GunTechnical Specifications:Oil Gun 250ml |
| 40 | Auto Repairing Tool Set with tool Box Technical Specifications:Auto Repairing Tool Set with tool Box (Pack of 40-50) |
| 41 | Single cylinder four stroke petrol engine with electrical dynamometerTechnical Specifications:Performance Test Engine: 3HP at 3000RPM coupled with loading device on a common base plate.Types of Loading:1.Rope Brake Dynamometer2.Eddy current DynamometerThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 42 | Diesel engine test rig consisting of a 1 cylinder 4- strokeTechnical Specifications:Body Material : MSBore Size: 80 mmCooling Type: WaterCurrent: 15A, Engine Speed: 1500 rpmThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 43 | Saybolt viscometer apparatusTechnical Specifications:Saybolt Viscometer of as per ASTM D- 88, Single tests provision, electrically heated model with for bath Digital Temperature controller of Double display for observe set value & process value, with presetting system, motorized stirrer of pure Ac. with switch, control heater with variac/energy control, Universal and furol jet Both, key for opening jets, cup cover, receiving flask of 60 ml, levelling system, temperature range from ambient to 110 deg. C, with 0.1 deg. C display, accuracy +/- 1 deg C, thermometer holder, without thermometer, run by 220 Volt, AC. The equipments need to be supplied along with all necessary accessories including supporting table.* Operating Manual in hard copy and soft copy encrypted in CD |
| 44 | Ramsbottom carbon residue apparatusTechnical Specifications:Ramsbottom Carbon Residue tester as per IP-14, IS- 1448 P-8, ASTM D - 524, Digital controller with presetting system for test temperature at 550 +/- 5 -10 deg. C, 6 Nos. tests provision, cooking bulb, syringe 5 ml. With needle, tongs, for carbon estimation Spares:- Cooking Bulb - each. Hypodermic Syringe with needle of 5 – 10 ml - each. Stainless steel Tongs of 12” to pull up the cooking bulb from Iron Hole - each. Control Bulb of stainless steel make - each The equipments need to be supplied along with all necessary accessories including supporting table.* Operating Manual in hard copy and soft copy encrypted in CD l |
| 45 | Inclined plane and frictionrTechnical Specifications:Angle of plane adjustable· Graduated weight set· Friction body· Inclined plane Length: 900 x 180 mm· Adjustable angle range: 0° to 90°· Dimensions: L x W: 900 X 180 mm* Operating Manual in hard copy and soft copy encrypted in CD |
| 46 | Pulley blocks with Rope of appropriate sizeTechnical Specifications:Blocks: Aluminium. 8 cm Dia, 2 cm Groove – Single Grooved=1 no, Double Grooved= 2 nos |
| 47 | Investigation of cam mechanismTechnical Specifications:Models of five different type , properly mounted on separate boards.· Plate cam with Flat face reciprocating follower· Tangent cam with Roller oscillating follower· Cylindrical cam with Translating follower· End cam with Translating follower· Translating cam with Reciprocating knife edge followerThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD material |
| 48 | Forces in a crank jibTechnical Specifications:The apparatus comprising of a hollow aluminum tie rod casted partially into a cast iron Bar to form a compression balance, and a upper right bar steel made. A cast iron strip is provided to support the steel rod. The open ends of the steel and the aluminum bars are connected together via extinction balance with chain and hook. The hook can be adjusted according to the load to be lifted by the apparatus.The model need to be supplied along with all necessary accessories. * Operating Manual in hard copy and soft copy encrypted in CD |
| 49 | Forces in a simple bar structureTechnical Specifications:The roof truss consists of two rafters or struts and a restraining tie. Both rafters are pivoted at their apex. The other end of one of the rafters is pivoted to a freestandingbase, whilst the remaining rafter end runs on ball bearings along a track. The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 50 | Equilibrium of moments on a two arm leverTechnical Specifications:A teak wooden right-angled lever with fulcrum at Angle.· The horizontal arm is of 75 cm and vertical arm is of 20 cm,· A brass spring balance with adjustable wing nut is attached to the shorter arm.· The lever arm is with scale and grooved at every 5 cm complete with one sliding weight of 1 Kg.The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 51 | Dry frictionTechnical Specifications:Friction slide Apparatus consists of a 20 x 75 cm wooden board a with glass top hinged on an iron base to which a sector with graduated arc and vertical scale is provided. The plane may be clamped at any angle up to 60 degree. A 5 cm frictionless pulley is attached to the end by means of a clamp adjustable to any necessary position. One set of three wooden carriages with different bottom surface· Brass,· Glass and· IronThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 52 | Young modulus apparatusTechnical Specifications: Brass scale with a vernier reading to 0.1mm Scale plate carrying a 0 to 30mm scale and a movable vernier readable to 0.1mm precision. Tension weight of mass 1.3kg approx. The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 53 | Friction slide apparatus with weightTechnical Specifications:Friction Slide Apparatus With WeightThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 54 | Forces in various single plane trussesTechnical Specifications:Apparatus consists of four panel of PRATT truss model. All tension member is provided with detachable spring. Dial gauge with magnetic base will be provided with the apparatus. The model need to be supplied along with all necessary accessories.* Operating Manual in hard copy and soft copy encrypted in CD |
| 55 | Shear force ApparatusTechnical Specifications:Total Length of beam : 150 cm· Width of the beam : 5 cm· Height of the beam : 3.5 cm· Left Side from Breaking Point : 120 cm· Right Side from Breaking Point : 60 cm· Distance between the slots given: 5 cm each· Complete with three U shaped sliding weight and two knife edge end supportson stand.The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 56 | Bending moment ApparatusTechnical Specifications:Total Length of beam : 150 cm· Width of the beam : 5 cm· Height of the beam : 3.5 cm· Left Side from Breaking Point : 120 cm· Right Side from Breaking Point : 60 cm· Distance between the slots given : 5 cm each. Complete with three U shaped sliding weight and two knife edge end supports on stand.The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 57 | Forces suspension bridgeTechnical Specifications:Apparatus Consists of two mild steel cables 0.5cm diameter in cross section and 150cm long, pinned to two supports 90cm apart situated symmetrically.· One of the ends can be converted to a roller by applying a known load at the end with the help of suspended pulley system.· Vertical loads can be applied at various points along the span of the beam.A dial gauge with 25mm travel (with a magnetic base) is to be supplied with the apparatus complete with a supporting stand and a set of weights.The model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 58 | Three hinged archTechnical Specifications:The mild steel model has a span of 100 cm and rise 25cm, with hinges at supports and crown. One of the ends rests on rollers.· Along the horizontal span of the arch various points are marked at equidistant for the application of loadThe model need to be supplied along with all necessary accessories * Operating Manual in hard copy and soft copy encrypted in CD |
| 59 | Venturimeter and Orificemeter apparatusTechnical Specifications:Venturi meter : Body Material Clear Acrylic compatible to 1” Dia. Pipe.• Orifice meter : Body Material Clear Acrylic compatible to 1” Dia. Pipe.• Orifice plate made of Stainless Steel• Water Circulation : 0.5 HP Pump.• Flow Measurement : Using Measuring Tank and piezometer. (Capacity 25 ltrs.)• Sump Tank : Material Stainless Steel, Capacity 50 Ltrs.• Stop Watch : Digital Electronics stop watch.• Pressure Measurement : By pressurized differential pressure manometer.• Control Panel Comprises of Standard make On/Off Switch, Mains Indicator,* Operating Manual in hard copy and soft copy encrypted in CD |
| 60 | Osborne Reynolds apparatusTechnical Specifications:Inner diameter: 16 mm. External diameter: 20 mm. Length: 750 mm.Water supply tank with level fitting, Capacity: 2.4 ltr.Dye tank with a valve and an injection needle, tank capacity:0.4 ltr. Control valve* Operating Manual in hard copy and soft copy encrypted in CD |
| 61 | Pipe friction loss apparatusTechnical Specifications:Pipes (2 Nos.) : Material GI of ½\" & 1” Diameter • Pipe Test Section : Length 1 m • Water Circulation : FHP Pump, • Flow Measurement : Using Measuring Tank with Piezometer, Capacity 25 Ltrs. • Sump Tank : Stainless Steel, Capacity 50 Ltrs. • Stop Watch : Mechanical / Electronic • Control Panel : On / Off Switch, Mains Indicator etc.* Operating Manual in hard copy and soft copy encrypted in CD |
| 62 | PELTON TURBINE TEST RIGTechnical Specifications:MODEL : 1 HP • Output Power : 1.33 HP / 1 Kw • Discharge : 300 LPM (Approx.) • Supply Head : 25 m • Rope Brake Dynamometer : Dia 200 mm • Sump Tank Capacity : 150 Liters. • Water Circulation : Centrifugal Pump • Capacity : 5 HP, Three Phase • Speed : 1000 RPM (approx.) • Impeller : Material Brass, Bucket type • Nozzle : Material Stainless Steel/Mild Steel • Spear : Material Stainless Steel/Mild Steel • Discharge Measurement : Pitot Tube with Manometer • Control Panel Star/Delta Starter, Mains Indicator, MCB for overload protection* Operating Manual in hard copy and soft copy encrypted in CD |
| 63 | Francis turbine modelTechnical Specifications:The model for institutional purpose made of good surface finish product |
| 64 | Kaplan turbine modelTechnical Specifications:The model for institutional purpose made of good surface finish product |
| 65 | Gas turbine modelTechnical Specifications:The model for institutional purpose made of good surface finish product |
| 66 | Pressure measurement apparatusTechnical Specifications:Supplied with different type of pressure measurement devices o ‘U’ tube differential manometer o Inclined tube manometer o Piezometer tube o Pressure & Vacuum gauges o Pressure Transmitter o Orifice & Venturi meter • Sump Tank Capacity : 1200mm x 600mm x 600mm of stainless steel • Measuring Tank Capacity : 600mm x 600mm x 600mm of stainless steel • Air vessel with relief valve • Piping & Fittings : GI Material • Valves : 2 for Drain, 1 for bypass, 2 for outlet water control, 2 for water inlet control • Tee handle valve : 4 for pressure measurement at different points. • Power Requirement : 220 VAC + 10%, 50 Hz • Pump : 0.5 HP single phase Electronic Stopwatch* Operating Manual in hard copy and soft copy encrypted in CD |
| 67 | Impact of jet apparatusTechnical Specifications:Test Plates : Material Brass (2 Nos.) 1. Flat Plate 2. Hemispherical Cup • Nozzle : Material Brass • Stainless Steel Chamber: Having of opposite sides made of glass • Water Circulation : FHP Pump, • Flow Measurement : Using Measuring Tank with Piezometer, Capacity 40 Ltrs. • Sump Tank : Capacity 60 Ltrs. • Stop Watch : Electronic • Control Panel : On / Off Switch, Mains Indicator etc.* Operating Manual in hard copy and soft copy encrypted in CD |
| 68 | Heleshaw ApparatusTechnical Specifications:Net dimensions and weight:720 mm x 520 mm x 470 mm and 18 kgApproximate packed dimensions and weight:0.176 m3 and 28 kgChannel working section ( nominal) : 300 mm x 250 mm, depth 0.75 mmAncillaries (included):• Rubber sheet (from which to cut models)• All necessary pipe clips, connectors, pipes and tubing• Dye bottle, clamp and dye• Water jet vacuum pump• Retort rod and clamp• Adaptor• Spare tap• Transfusion clips* Operating Manual in hard copy and soft copy encrypted in CD |
| 69 | Pitot tube apparatusTechnical Specifications:Pitot Tube : Material Copper/SS of compatible size fitted with Vernier Scale • Test Section : Material Clear Acrylic, Compatible to 1” Dia. Pipe • Water Circulation : FHP Pump, • Flow Measurement : Using Measuring Tank, Capacity 40 Ltrs. • Sump Tank : Capacity 70 Ltrs. • Stop Watch : Electronic • Control Panel : On / Off Switch, Mains Indicator etc.* Operating Manual in hard copy and soft copy encrypted in CD |
| 70 | Bernoulli\"s theorem apparatusTechnical Specifications:Test Section : Material Acrylic, Size • Inlet Tank : Capacity 20 Liters., Stainless Steel • Supply Tank : Capacity 70 Liters., Stainless Steel • Measuring Tank : Capacity 20 Ltrs. Fitted with Piezometer Tube & Scale • Piezometer Tubes : Material P.U. Tubes (9 Nos.) • Pump : FHP Capacity make Crompton Graves • Piping : GI / PVC Size BSP • Stop Watch : Electronic* Operating Manual in hard copy and soft copy encrypted in CD |
| 71 | Centrifugal Pump Test BedTechnical Specifications:Centrifugal pump, self-priming Max. Flow rate: 3000L/h Max. Head: 36,9m Asynchronous motor Nominal power: 370W Measuring ranges Pressure (outlet side): -1…5bar Pressure (inlet side): -1…1,Speed: 0…3000min-1 Power: 0…1000W 230V, 50Hz, 1 phase * Operating Manual in hard copy and soft copy encrypted in CD Please Enable Macros to View BoQ information |
