|
| 1 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 128. 100mm GI pipe (ISI-Medium) |
| 2 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 127. 80mm GI pipe (ISI-Medium) |
| 3 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 138. GI reducer (heavy) 80/65 mm x 20 mm |
| 4 | Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc. Supplying & Fixing of m.s. Sole plate (450x450x6m) at the bottom of pole. |
| 5 | Slot cutting in making cover with sleeve arm bracket including making provision of 15 Amp fuse unit and other accessories in the sleeve including necessary connection |
| 6 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 7 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 194. 6mm dia rag bolt with nut |
| 8 | Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 2 coreiiupto 6 sqmm |
| 9 | Finishing cable ends.(b)Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.(ii) 2 core 6 sqmm cable |
| 10 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 120. 15mm dia GI pipe (ISI Medium) |
| 11 | Painting steel tubular pole including projected arm bracket with one (Scraping where necessary). Pole painting upto 5mtr. Pole |
| 12 | SCHEDULE OF RATES FOR OH LINE INSTALLATION (LTDISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/polewith hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling 9.0 mtr. Size 0.6x0.6x1.70 mts |
| 13 | Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 6 1/2.80 2 |
| 14 | Laying through Underground Trech.(a)Laying of one No. cable upto depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 15 | Laying through RCC/Hume/GI Pipe.(a)Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench FOR single, 2, 3, 3... & 4 core |
| 16 | SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe. |
| 17 | Equipment earthing.Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (HOT Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc |
| 18 | SUPPLY & DELIVERY OF SINTEX 2 (BOTTOM SIDE) AND 2 (TOP SIDE) FRP WHITE WATERPROOF TYPE LOOPING CABLE BOX SIZE 300X200X125 MM DEEP, 4 MM THICK , HAVING INSULATION RESISTANCE GREATER THAN 200 MEGA OHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS. TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONECOMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE AS PER RATE OBTAINED FROM GEM PORTAL |
| 19 | Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN |
| 20 | SUPPLY & FIXING MEDIUM GUAGE G.I.PIPE(ISI MEDIUM) PRTECTION WITH NECESSARY FITTING AND JOINT MATERIAL AS REQUIRED.RATE TAKEN FROM PWD ELECTRICALSCHEDULE 2017,PAGE:F-6,SL.NO: 11© |
| 21 | Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand(approved by EIC) of the following sizes in the prelaidpolythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) |
| 22 | SUPPLY AND DELIVERY OF CROMPTON MAKE 40 WATT WARM WHITE POST TOP FITTINGS (MAPLE LPTO-40W-M) FOR 360 DEGREE INDIRECT LIGHT WITH IP 6510KV SURGEPROTECTION CCT-3000K CRI-70,EFFICIANCY 90L/WATT,APPROX WEIGHT-4.8KG & DIMENSION H-395MM,W-410MM,ID-62MM,WITH 5 YEARS WARRANTY FROMORIGINAL EQUIPMENT MANUFACTURER. |
| 23 | Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage. |
| 24 | Sub Total |
| 25 | CGST 9% |
| 26 | SGST 9% |
| 27 | CESS 1% Please Enable Macros to View BoQ information |
