|
| 1 | Wiring for light point with existing 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed by existing medium class PVC conduit, with existing piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with existing 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.(Labour Charges Only) |
| 2 | Wiring for light/ power plug with existing 2X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loopearthing as required.(Labour Charges Only) |
| 3 | Wiring for circuit/submain wiring along with earth wire using existing 2 X 1.5 Sqmm + 1 X 1.5 sq.mm earth wire FRLS PVC insulated copper conductor, single core drawn through existing medium class PVC conduit (surface/recessed) as required.(Labour Charges Only) |
| 4 | Fixing of existing PVC gang box on surface or in recess with suitable size including fixing of existing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections etc. as required.(Labour Charges Only) |
| 5 | Fixing of existing PVC gang box on surface or in recess with suitable size including fixing of existing 15/16 A socket outlet and 15/16 A piano type switch, connections etc. as required.(Labour Charges Only) |
| 6 | Supply and fixing of 100W LED Flood Light i/c supplying of service cable for connection as required on hire basis as required. and dismantling after completion of ITF.(Hire Chargesfor 2 days x 10 = 20 Nos) |
| 7 | Fixing of existing LED Batten/LED tube fixture etc as required.(Labour Charges Only) |
| 8 | Laying of existing PVC insulated armoured cable of 1.1 KV grade of 10 sq.mm 2 core cable by suspension or trench cutting upto a depth of 10 cm i/c excavation and re-filling and clamping etc. as required.(Labour Charges Only) |
| 9 | Supplying of 20mm GI Clamp with screw- 144 Pcs |
| 10 | Supplying of 25mm GI Clamp with screw- 144 Pcs |
| 11 | Supplying of 1.5 Sq.mm FRLS Copper wire Make: Pressfit/Anchor/Havells or its equivalent |
| 12 | Supplying and fixing of Pendant Holder Make: Pressfit/ Anchor or its equivalent |
| 13 | Supplying of 15W LED Bulb Make: Bajaj/Philips/Havells or its equivalent |
| 14 | Supplying and laying of 2 core, 1.5 sqmm twin twisted pvc insulated copper flexible wire by suspension |
| 15 | Supplying and Laying of Aluminium Conductor 6 Sq.mm 2 core Service wire Make: Pressfit or its equivalent by suspension or through existing PVC Pipe along with trench cutting upto a depth of 10 cm i/c excavation and re-filling and clamping etc. as required. |
| 16 | Supplying and fixing following way, horizontal type three poleand neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But withoutMCB/RCCB/Isolator) a)4 Way (4 + 12), Double Door |
| 17 | Supplying and fixing following rating, four pole, 415 V, isolatorin the existing MCB DB complete with connections, testing andcommissioning etc. as required.a) 100 A |
| 18 | Supplying and fixing following rating, four pole, 415 V, isolatorin the existing MCB DB complete with connections, testing andcommissioning etc. as required.a) 63 A |
| 19 | Supplying of FR Insulation Tape Make: Pressfit/Anchor or its equivalent |
| 20 | Transportation of materials from E&M Store to the work site and back to E&M Store after completion of ITF |
| 21 | Dismantling and removing the above mentioned electrical items / fittings after completion of ITF and handing over the same to the concerned JE. |
| 22 | Providing, Installation, Testing and Commissioning of LED Tunny Light of different colours and dismantling the same after completion of Island Tourism Festival (Hire Charge Only)300 Sets (Each Set of 10 Mtr) |
