|
| 1 | Dismantling / Demolition of existing roof terracing of cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/ mechanical brush and with water throughly to remove all dust / dirt and loose particles to expose bare concrete roof slab and removal of rubbish / demolished material out side MD land complete all as specified and directed. Note: Demolition should be done by chiselling. |
| 2 | M&L brushing neat cement slurry @ 3 Kgs of cement per Sqm. Complete all as specified & directed. |
| 3 | M&L 10mm thick ready mix plaster, on fair faces of brick work or concrete surfaces and provision of on roof finished even and smooth using liquid water proofing compound as per manufacturers instructions Complete all as specified and directed. Note:- Supply only liquid water proofing compound shall be measured & paid separately. |
| 4 | M&L for PCC 1 :2 :4 type B0 (using 12.5mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer\"s instructions on the roof surface to achieve requisite slope all as specified and directed. Note: Supply only water proofing compound shall be measured & paid separately. |
| 5 | Supply only polymer based liquid water proofing compound complete all as specified and directed. |
| 6 | M&L APP modified membrane roof treatment to parapet wall surface to the following specification:- (a) Applying oil bound bitumen primer @0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 25 0 C after preparation of surface.(b) Supply and lay APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sq.(c) Applyíng one coat of solar reflective bituminous paint all as per manufactures\"s instruction complete all as specified and as directed. |
| 7 | Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to outside MD land. |
| 8 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc. 6m mean radius built in CM (1:6) for MH complete all as specified and directed. |
| 9 | Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris outside MD land. |
| 10 | M&L 10 mm thick ready mix plaster, on fair faces of brick work or concrete surfaces and surfaces finished even and smooth including necessary scaffolding complete all as specified and directed. |
| 11 | M&L 5 mm thick ready mix plaster over concrete surfaces of ceiling and provn of 3mm thick wall care putty on plastered ceiling surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified and directed. |
| 12 | M&L for 15+5 mm thick ready mix plaster using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified an directed.Note: Water proofing compound shall be measured & paid seperately. |
| 13 | M&L for Preparation of old / new plastered or un-plastered surfaces of wall by applying 3mm thick wallcare putty on plastered surfaces of wall; with white putty for smooth finish. |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer.etc complete all as specified and directed. |
| 15 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed |
| 16 | M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper complete all as specified and directed |
| 18 | M&L for preparation of old plastered surfaces on ceiling and applying two coats of oil bound distemper complete all as specified and directed |
| 19 | M&L for complete removal of existing surfaces on ceiling and applying two Coats of white wash with complete all as specified and directed. |
| 20 | M&L for preparation of NEW plastered walls surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. |
| 21 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 22 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 23 | M&L for PCC 1:3:6 type C2 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified and directed. |
| 24 | M&L for 25mm thick cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) over in base of floor. Complete all as specified and directed. |
| 25 | M&L for 75mm thick cement Concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in floor/sub base and finished even and fair complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed. |
| 27 | Dismantling stone slabs or PCC tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete all as specified and directed. |
| 28 | M&L for 15 to 20mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishand including over 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed by EIC |
| 29 | M&L for machine cut kota stone slab flooring 20 - 25 mm thick over 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed by ElC |
| 30 | M&L for Marble work other than white or black/Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs, flooring and like over and including provision of 15 mm thick cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed |
| 31 | M&L for 15 -18mm thick granite stone slab (of any type) machine cut (in one piece) supported with 16mm thick marble stone base, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in cooking platforms WHB counter top, vertical supports including grinding and polishing complete all as specified and directed |
| 32 | Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed |
| 33 | M&L for coloured (light shade) vitrified ceramic tiles of size 600mm x 600mm x 10mm thick in floors etc, setand jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. incl 15 mm thick screed bed in cement mortar 1:6 including finishing even and fair complete all as specified and directed. |
| 34 | M&L coloured (light shade) vitrified ceramic tiles of size 600mm x 600mm x 10mm thick on vertical wall skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed |
| 35 | M&L Non skid ceramic colored tiles, edge cut 7 to 8mm thick square or rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18mm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified and directed. |
| 36 | M&L for coloured glazed ceramic tiles of size 350 x 450 x 7mm thick, on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces inc rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 37 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm but n exc 4 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished idetical to existing finish without any all as specified and directed by Engr-in-charge. |
| 38 | Taking down chowkats of frames with shutters (without exceeding taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical tol existing finish without any extra cost of Govt) all as specified and directed by Engr-in-charge. |
| 39 | Dismantling of boarding, any description and in any position complete all as specified and directed. |
| 40 | M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 41 | M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed |
| 42 | S&F continous (piano) hinges 40 mm, mild steel, bright finish or electro-galvanised complete all as specified and directed. |
| 43 | S&F 150mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 44 | S&F 2nd class soft wood as in plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chemferred, put together with glue pinned at joints complete all as specified and directed. |
| 45 | S&F factory made 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 46 | S&F 35 mm thick, 2nd class hard wood factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 47 | S&F extruded Powder coated aluminium section as in Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and all directed |
| 48 | S&F 4.8mm thick glass selected quality in each pane for aluminimum door shutters, aluminium partition wall and sliding windows/ventilator shutters etc including rubber beading or gasket for aluminium section n exc .5 Sqm complete all as specified and directed. |
| 49 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed |
| 50 | S&F aluminium grill conforming to DG-102 of Deco Grill or equivalent, (10mm x 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including \"F/U\" channel not less than 1.5mm thick complete all as specified and directed |
| 51 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as specified and directed. |
| 52 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. |
| 53 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy all as specified and directed |
| 54 | S&F 150 mm long aluminium bow handles cast type anodised. |
| 55 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section. |
| 56 | S&F butt hinges med weight cold rolled MS, size 100 mm. |
| 57 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete. complete all as specified and directed |
| 58 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 59 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel pain. complete all as specified |
| 60 | Taking up or down 15 mm bore Gl tubing from wall, floor, ceiling.complete all as specified & directed. |
| 61 | All as per item No 60, but 20 mm bore. complete all as specified & directed. |
| 62 | All as per item No 60, but 40 mm bore. complete all as specified & directed. |
| 63 | S&F GI tube medium grade of 15 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc. complete all as specified & directed. |
| 64 | All as per item No 63, but 20 mm bore. complete all as specified & directed. |
| 65 | All as per item No 63 but 40 mm bore. complete all as specified & directed. |
| 66 | Demolition carefully RCC work as in, Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work etc by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of debris outside the MD land. complete all as specified and directed. |
| 67 | M&L for RCC 1:1.5:3 type BO (12.5 mm graded aggregate) nominal mix as in repair old rcc tank on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed. |
| 68 | M&L for use and waste of Formwork to soffits of suspended slabs such as roof slabs, wall, column, facia water tank staging floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat and rough surfaces complete all as specified and directed |
| 69 | M<MT bars 10mm dia and over cut to length, bent to shape reqd, inculding cranking, bending spirally for hooping for Columns, hooking ends and binding with and incl MS wire (annealed) not less than .90mm dia complete all as specified and directed. |
| 70 | S&F rotational moulded polythylence water storage tanks (2000 Ltr cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-l of 1000 Itrs including disconnecting the unserviceable existing tanks complete screwed for iron pipe or brass ferrule directed. |
| 71 | M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed. |
| 72 | M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mmbore dia complete all as specified and directed |
| 73 | S&F EWC wall hung WC with in built jet PP soft close silm seat hinges plastic hind ware wall hanging type with sheet cover all as specified and directed of size (H x W x P) 365 x 525 x 400 mm with \"P\" trap distance 22.5 cm complete all as specified and directed. |
| 74 | M&L PVC single piece slim concealed cistern body with installation kit & P type drain pipe connection setfor wall hung WC flushing cistern, with inlet, ball valve, float including flush pipe and fixed in repairs complete all as specified and directed |
| 75 | S&F Mirror 900mm x 600 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plughs with chromium plated brass screws and cup washers in repairs complete all as specified and directed. |
| 76 | M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including fixing in repairs granite top with ceramic under counter basin pinning in ends of brackets or erecting stand including fixing of waste pipe and etc (Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed. |
| 77 | M&L 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, glazed ware wash basin etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 78 | Supply only pillar tap 15 mm bore Single Lever Basin Mixer hot and could without Popup Waste with 450mm Long Braided Hoses |
| 79 | S&F Angular Stop Cock with Wall Flange 15mm bore dia, cast copper alloy fancy type. Complete all as specfied & directed. |
| 80 | S&F stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed. |
| 81 | S&F 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessary fixed complete to walls, ceilings or in floors etc. |
| 82 | M&L bib tap brass 15mm bore dia chromium plated long shank fancy type 2-way Bib Cock with Wall Flange screwed for iron pipes complete in repairs complete all as specified and directed. |
| 83 | S&F in repairs brass chromium plated bathroom wall (wall mounted model) mixture with telephonic shower arrangement with swivel wall hook with and including old Victorian design telephone shower with 12mm dia 1.5m long flexible tube and swivel hook etc. Complete all as specified and directed. |
| 84 | S&F 20 mm dia aluminium alloy curtain rail fixing with bracket, stops, rollers etc complete all as specified and directed. |
| 85 | S&F in repair, water jet chromium plated for vitreous china pedestal pattern water closet of approved make all as specified and directed. |
| 86 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metrelong flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 87 | S&F in repairs brass chromium plated towel rail 20mm dia, \"D\" type, 600mm long between flanges. |
| 88 | S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge. |
| 89 | S&F Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide bracked with chromium plated guard and railing 60cm long in repairs complete all as specified and directed. |
| 90 | S&F Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairscomplete all as specified and directed. |
| 91 | S&F 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. Complete all as specified and directed. |
| 92 | S&F 25 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. Complete all as specified and directed. |
| 93 | Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store. |
| 94 | M&L for 110 mm dia PVC (SWR) pipe single socketed (ISI marked) fixed to wall with mild steel RM clamps complete all as specified and directed. |
| 95 | M&L PVC SWR) 110mm bends any radius equal complete all as specified and directed |
| 96 | S & F 110 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door. |
| 97 | S&F 75mm bore PVC soil waste pipe pipe single socketed (ISI Marked) any length with rubber ring joints RM complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc including taking down of any type complete all as specifed and directed. |
| 98 | S&F 75 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door. |
| 99 | M&L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 100 | M&L 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 101 | Chipping, removing, carefully concrete including loose palster by low impact Hammer without damaging the structure and cleaning and disposal of debris outside the premises including necessary form work ie providing & erecting steel props, safety nets, dust control net, Self supported two legged B class tubular steel scaffolding, 4mm thick ply covering to machineries / other utilities etc complete all as specified and directed. |
| 102 | Cleaning the existing reinforcement with wire / rotary wire brush, making the surfaces free from loose material dirt etc, complete. Applying two coats of alkaline rust converting primer conforming to ASTM-B 117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats. |
| 103 | Providing and fixing additional steel bar in various structural elements like column, beams and slab etc including drilling, bending and fixing the bars tying with preleft binding wires etc complete anchoring reinforcement bar in existing RCC member in holes of minimum 10d depth for 10 mm dia bars complete all as specified and directed. |
| 104 | M&L for carrying out application of \"Bi-polar migratory corrosion inhibitor EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electrochemical reaction. It has property to attach anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete. Complete all as specified and directed. |
| 105 | M&L for applying Anticorrosive Treatment to IPNET RB on Reinforcement by IPNET RB. Application of two coats of exposed reinforcement in two coats with time interval of minimum 4 hours between each lcoat. The application shall be by brushcomplete all as specified and directed. |
| 106 | Providing and applying structural grade epoxy-latex bond coat prior to application of any type of mortar conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application complete all as specified and directed. |
| 107 | Building up the profile of structual members by using polymer modified mortar upto 20mm thickness including levelling profilling etc complete all as specified and directed.Make:- Molith PMM of Krishna conchem or equivalent.Note :- Mode of measurement: Superficial area of concrete will be measured. |
| 108 | Building up the profile of structual members by using polymer modified mortar upto 40mm thickness including levelling profilling etc complete all as specified and directed. Note: Mode of measurement: Superficial area of concrete will be measured. |
| 109 | M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in Kg thikness) with prebatched, prepacked, single component ready to use microconcrete as approved by GE at any level and at any lead or lift as directed including prefabricated water tight formwork, .centering, scaffolding, also including mixing laying, leveling, finishing, curing etc as per manufacturer\"s specifications complete all as specified and directed. Note : Reinforcement only shall be measured and paid separately. |
| 110 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 111 | M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manholes etc) with plain fair faces. complete all as specified and directed. |
| 112 | M&L for providing cement concrete 1:2:4, type B0 (12.50 mm graded aggregate) in lintels upto 1.5m clear span hand wash counter wuthout base cills, steps: seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 113 | S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, and wastes. including bedding in cement mortar to dwaf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowi size 410mm x 330mmx 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed. |
| 114 | S&F readymade pulley operated clothes drying system incl of four aluminium pipes of 9 feet long each (4 pipes) channel assembly locking system ropes and all fixing material complete all as specified and directed. |
| 115 | Dismantling of boarding ,any description and in any position complete all as specified and directed |
| 116 | Supply, fabricate and fixing with WPC board, white, one side decorative lamination and other side balancing whit, 100% termite proof, water proof, fire retardant, 18mm thick heavy density, interior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under -(a) Stainless steel Handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening / closing operation. (c) Magnet of suitable sizefixed for cabin leafs, drawers as approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and the design and pattern should be approved by Engr-In-Charge. |
| 117 | Exavating in trenches in Hard / dense soil n. exe 1.5 m wide and n. exe 1.5 min depth, for foundation or for shafts, etc wells, cess pits, man holes, pier holes etc n exe 10 sqm on plan n exe 1.5 m depth and getting out complete all as specified and directed |
| 118 | M&L for cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation complete all as specified and directed. |
| 119 | S&F 200mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specfied complete all as specfied and directed. |
| 120 | M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed. |
| 121 | Returning, flling in Hard / dense soil , including spreading, levelling, watering and well raming in layer not exe 25cm complete as specified and directed. |
| 122 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed of material outside MD land complete as specified and directed. |
| 123 | Cutting into existing manholes for connecting new drains of 150 mm dia pipe and making good two pipes land rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified and directed. |
| 124 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., incuding welding. grinding. buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 125 | Demolition of of stone slabs in floors etc any thickness complete all as specified and directed. |
| 126 | M&L for crushed sand filling under floors or in foundations including watered and consolidation complete all as specfied and directed |
| 127 | M&L for Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment with glossy finish and including removing the existing paver blocks including removing of debries out side MD land complete all as specified and directed. |
| 128 | M&L for cement concrete 100mm thick type C1, 1:2:4 (using 20mm graded stone aggregate) as in floor etc and finishing even and smooth without using extra cement complete all as specified and directed. |
| 129 | S&F premoulded FRP Chajjas with 2 to 2.5 mm FRP thickness on both sides with finished mangalore clay type with 150 mm drop on front, sides and 60 mm collar on back side including including necessary scaffolding necessary fixtures complete all as directed. |
| 130 | M&L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed |
| 131 | M&I Cutting grooves in brick wall, 100 mm wide and 150 mm deep and shaping, filling cement concrete 1:2:4 type B-1 in cement mortar 1:3 making good to facings where required complete all as specified and directed Note:- Supply only (Acrylic polymer Coating) water proofing shall be measured & paid separately. |
| 132 | S&F Mortice Door lock handle set 200 mm /6 lever locking suitable for left and right handle door., brass body 6 lever for wooden door 2 in 1 pin or key complete all as specified and directed |
| 133 | Supply only (Acrylic polymer emulsion Coating) water proofing compound. |
| 134 | M&L Demolition of cement concrete any face internal external unreinforced of any type any level and at any position. Ensure that structure is at least 3 days old, Bonding Agent Bond coat with a mixing ratio of 1:2 (one part of Acrylic polymer emulsion and two parts of cement). The applied bonding agent should be in tacky condition before topping. Repair Mortar Bond coat with a mixing ratio of 1:2 (one part of Acrylic polymer emulsion and two parts of cement) including 10mm Repair Mortar with a mixing ratio of 1:2:4 (one part of Acrylic polymer emulsion, two parts of cement and five part of sand) applied in specified area. After the application of Repair Mortar to keep the surface moist for 12 - 24 cement complete all as specified Note: (Acrylic polymer emulsion Coating) shall be measured & paid seperately and including necessary scaffolding complete all as specified and as directed. |
| 135 | Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed. |
| 136 | Taking down main switches from DBs with sheet metal enclosure 08/04 way SPN/TPN DBsetc all as specified and directed. |
| 137 | M & Lfor point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed/casing caping in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan point controlled by one one way switch, complete all as specified and directed. Note All point wiring shall be done in/overPVCPlate Moisture Proof. Note: Cost of same plate will be paid separately. |
| 138 | All as per item No 137 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed.Note All point wiring shall be done in/over Moisture Proof PVCPlate. Note: Cost of same plate will be paid separately. |
| 139 | M & Lfor point wiring complete with proper colour coding using 1100 volts grade, 2.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one 5Pin,6/16Amps,Socket outlet independent,complete all as specified and directed. Note All point wiring shall be done in/over Moisture Proof PVCPlate. Note: Cost of same plate will be paid separately. |
| 140 | Material and labour PVC plate Hard plastic with Min 2mm thickness that shall be all weather proof ,insatalling in wall with dimension as per site requirement, with all connected equipments ,Casing capping will be done on over PVC plate complete all as specified and directed. |
| 141 | Supply & fixing ceiling rose , surface bakelite3 terminal completeall as specified and directed. |
| 142 | Supply & fixing modular fan regulator,120W- 2 module completeall as specified and directed. |
| 143 | Supply & fixing switch modular type6 Amp single pole one way 230V WeatherproofIP 66/ 67 switches complete all as specified. |
| 144 | Supply & fixing IP 66/67 Switch socket modular boxtype 6 Amp2/3 pin single pole one way 230 V completeall as specified and directed. |
| 145 | Supply & fixing IP 66/67 Switch socket modular box type 16 Amp2/3 pin single pole one way 230 V completeall as specified and directed. |
| 146 | Supply & fixing Modular white cover plate with frame 8/6 Module completeall as specified and directed.. |
| 147 | Supply & fixing Modular white cover plate with frame 3 Module completeall as specified and directed.. |
| 148 | Supply& fixing modular Metal/Hard PVC Flush box 8/6 Module completeall as specified and directed.. |
| 149 | Supply& fixing modular Metal/Hard PVC Flush box 3 Module completeall as specified and directed.. |
| 150 | Supply& fixing modular Metal/Hard PVC Flush box 4 Module completeall as specified and directed. |
| 151 | S&F LED Batten T-5 ,integrated sleek extruded LED channel with acrylic cover, with and including 20 Wattlight and driver, prewired, provision of 0.5 Sqmm 3 core flexible copper conductor wirefor connecting from ceiling rose, complete all as specified and directed. LED batten must have technical specification specified below: - 20 W Wattage, Rated input voltage-140 V AC-270 V AC, Driver efficiency-88%, Lumens Efficiency-100lm/w, starting voltage 90V and THD <=20 Colour Rendering index (CRI) >80, Colour Temperature-6500K, Cool daylight Light Effect, No harmful radiations, In built surge protection-2.5 kV, Isolation-3.75 kV and Zero mercury content. |
| 152 | Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. |
| 153 | M&L for sub main wiring complete two run of size 2.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductorcable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing capingfixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed.(For Building security Lights).Note: Three run 2.5 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as \"one unit\" length. |
| 154 | Taking down of existing ceiling fans, opening / dismantling of fan & fan blades, cleaning, servicing, oiling, greasing, carrying out repairs such as replacement of capacitors, bearings, bushes, canpoy, condensor, clamp, safety pin, rubber bush and reassembling the fan & fan blades,, connecting up, testing and re-fixing of the same ceiling fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces,complete all as specified and directed. |
| 155 | Supply & fixMCB DB SPN 8 way IP 66/ 67 double door with din rail and bus bar including making good to the disurbed surface matching with the existing ,complete all as specified and directed. |
| 156 | Supply and fix MCB SP 240 volts40 AMPAmps breaking capacity 10 KA \"B\" Series rating complete all as specified and directed. |
| 157 | Supply and fix MCB SP 240 volts 6 to 32 Amps breaking capacity 10 KA \"B\" Series rating complete all as specified and directed. |
| 158 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 159 | Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
| 160 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 55,095.00 (Minus) as listed in Schedule of CreditNote 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\"Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
