|
| 1 | Demolition of concrete (Un-reinforced) of any description in any positioncomplete all as specified and as directed |
| 2 | M&L 25 mm thick PCC type B-0 (1:2:4), using (12.5mm graded aggregate) as in sub base of flooring/as in roof leveling, finished even and fair complete all as specified and as directed |
| 3 | Supply only liquid water proofing compound complete all as specified and directed. |
| 4 | M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:-(a) M&L for surface preparation by removal/ taking down of existing treatment of tar felt/ tiling/loose particle to ensure or clean smooth and dry surface and preparing the surface.(b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.(c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction.(d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction.(e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as specified and directed. (f) M&L for providing template of size 450x450mm to each bidg where roof treatment is carried out with marking CA No, date ofroof treatment, expiry date, etc all as specified and directed(Note:- Dismantling & Romoval of existing old water prrofing membrane deemed to be included in quoted rate of this item) |
| 5 | Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and as directed. |
| 6 | M&L 2nd class hard wood in timbers scantling fixed in clean sawn complete all as specified and as directed. |
| 7 | M&L preparation surfaces of wood new or old of any description and girth not otherwise described and treated with creosote oil complete as specified and directed |
| 8 | S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed |
| 9 | S&F in repairs 75 mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed |
| 10 | S&F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed |
| 11 | S&F 110mm bore PVC (SWR) bends / shoes of any radius complete all as specified and as directed |
| 12 | S&F 75mm bore PVC (SWR) bends / shoes of any radius complete all as specified and as directed |
| 13 | S&F in repair PVC (SWR) Plain floor trap 75mm dia outlet with grating ind jointing with solvent cement fixed in cement concrete B1 (1:2:4) complete all as specified and as directed |
| 14 | S&F stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof bore of pipe 110mm complete all as specified and as directed. |
| 15 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and as directed |
| 16 | S&F 75 mm bore PVC (SWR) junction single, (Double T) equal or unequal including jointing with solvent cement complete all as specified and as directed |
| 17 | S&F in repairs, HDPE PVC lid (cover) for water storage tank of 500/1000 Ltrs capacity complete all as specified and directed |
| 18 | S&F in repairs, 18mm thick plywood grade BWR, type BB fixed with screws for shelves, kitchen cupboard etc, to timber frame work or ply wood including 3mm thick te4qak wood lipping on edges fixed in any position with nails complete all as specified |
| 19 | Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed |
| 20 | M&L for pre-painted, galvalume aluminium zinc coating Gl based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed |
| 21 | S&F 0.50mm thick pre-painted galvalume zinc coated Gl based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed by Engineer-in-Charge |
| 22 | M&L M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed by engineer in charge |
| 24 | M&L for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I.S.1161-1979 grade Fe-290 (Gde St-165 complete all as specified and directed). |
| 25 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insularion boards/slabs/blankets, any thickness, including cover fillets, complete all as directed |
| 26 | M&L in repair for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and approved design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main \"T\" runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main \"T\" at 600mm C/C to form a grid of 1200x600mm and secondly cross \"T\" of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using Gl soffit cleats fixed to existing RCC lintel with dash through fasteners, Gl adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main \"T\", bottom exposed width of 15mm of all \"T\" sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed. |
| 27 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed |
| 28 | M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class \"B\" bricks (Old size bricks) complete all as specified and as directed |
| 29 | All as per above item but except brick |
| 30 | S&F RCC M-30 Grade approved Design Precast concrete post of size 150mm x 150mm x 2100 mm height, having two grooves of size 55 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 50 mm thickness (1 Panel at bottom + 4 Design Panel bottom to top +1 Jafari type panel at top). The post shall be reinforced with 4 Nos of 8 mm dia bars with 4 mm dia stirrups @ 150 mm C/C, panels shall be reinforced with 4 Nos of longitudinal bars of 6mm dia plain steel & 6mm plain MS stirrups @ 150 C/C all welded. The post shall be fixed to the ground by digging a hole of 300mm x 300mm x 600 mm and filled with PCC 1:3:6 after the post should be aligned in these holes. The post will be erected @1.615m C/C. Height of the pillar shall be 2700mm (600mm below the ground and 2100 mm above the GL) with any approved design by Engr-In-Charge all as specified & directed |
| 31 | Taking down cement or cement lime plaster on brick or stone walls etc\"including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified & directed |
| 32 | M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 33 | M&L for 15 mm thick rendering on wall/concrete surface with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed |
| 34 | M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling. finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L applying two Cement Base paint on New surfaces (wall) including primer all as specified and directed |
| 36 | M&L for three coat of white wash on New surfaces (wall) including all preparation complete all as specified & directed |
| 37 | M&L for three coat of white wash on New surfaces Ceiling including all preparation complete all as specified & directed |
| 38 | M&L for preparation of old decorated surfaces (plastered/un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed. |
| 39 | M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed. |
| 40 | M&L for complete removal of existing treatment on walls incl washing, rubbing down and stopping and applying two coats of oil bound distemper over 1 mm thick wall care putty (White or tinted) complete all as specified and directed. |
| 41 | Taking down old U/S wooden/steel chowkhat with shutter nexc 1.50 sqm each and removing from site. |
| 42 | All as per above item but exc 1.5 and nexc 4 sqm |
| 43 | Taking down shutter from the frame of any discription exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 44 | M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed |
| 45 | M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, towe bolt complete without glazing bars, dovetailed or welded including soap coat complete all as specified and directed. |
| 46 | M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 47 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 48 | M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed |
| 49 | S&F PTMT Butt hinges 100 mm make Prayag complete all as specified and directed |
| 50 | S&F 200mm size PTMT tower bolt and fixed complete all as specified and directed |
| 51 | S&F 125mm size PTMT door handles and fixed complete all as specified and directed |
| 52 | S&F factory made 35 mm thick plain framed, panelled shutter (two or more panel) single or double leaf with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated factory made complete all as spcified and directed |
| 53 | S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. |
| 54 | S&F Framed work as in doors or gates or chowkhat of angle or other section with gusset plates, rails, braces, grill, grating etc, complete, drilled for fixing of steel sheeting or other covering either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging also fastening and fixing complete complete all as specified and directed. |
| 55 | S&F Stainless steel butt hinges 100 mm size, medium weight, having flap size 100 mm X 58 mm X 1.90 mm thick and dia of hinge pin 5.6 mm fixed with 8 nos stainless steel screws as per IS 12817 of 2013 complete all as specified and directed. |
| 56 | S&F 150 mm Stainless steel handles fabricated type bright finish having metal thickness 3 mm complete fixed with 4 nos stainless steel screws complete all as specified and directed |
| 57 | S&F 150 mm size mild steel barrel tower bolt, of extruded section and fixed to shutter complete all as specified and as directed. |
| 58 | S&F 300 mm size Stainless steel sliding door bolt, hasp & staple type with 16 mm dia rod, for use with Pad lock, with and including minimum 06 nuts and bolts, 4 on bolt plate and two on staple plate as per IS-15834 (2008) complete all as specified and directed. |
| 59 | S&F in repairs, 3 mm thick sheet glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane including hackingout old broken glass etc complete all as specified and directed |
| 60 | Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed |
| 61 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed |
| 62 | S&F in repair stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or MS beds size 2 mm to 3 mm size complete all as specified and directed. |
| 63 | M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed. |
| 64 | M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed. |
| 65 | M&L for 75 mm thick PCC (1:3:6) as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed. |
| 66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 67 | M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 sqm n exc, 0.18 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match complete all as specified and directed |
| 68 | M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.0018 sqm n exc. 0.36 sqm in vertical surface/suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm 1:6 complete all as specified and directed |
| 69 | M&L for glazed ceramic colour joint free tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 incl complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates). |
| 70 | M&L for 75mm thick cement concrete type D-2, 1:4:8 using (40mm graded aggregate) as in sub base complete all as specified and directed |
| 71 | Supply and laying sand (25 mm thickness) for cushioning to interlocking paver block complete all as specified and directed. |
| 72 | M&L rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete all as specified and directed. |
| 73 | M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded aggregates as in roof kerbs, edges of pathways, mud stops with fair finish surfaces, including chamfers, weatherings etc including necessary form work complete all as specified and as directed. |
| 74 | Demolition of stone slabs and tiles of any description or thickness laid in floors, aprons etc, laid, bedded and pointed in any mortar and and removing the rubbish complete all as specified and directed |
| 75 | M&L for machine cut kota stone slab flooring 20-22 mm thick, over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed. |
| 76 | M&L for machine cut Kota stone slab fooning, 18-20 mm thick, in one piece as in vertical surfaces, skirting etc, set and jointed in neat cement slurry mixed with pigment to match the shade of the slab including nibbing and polishing and pointed in colour cement to match including backing coat 10 mm in CM (1:4) complete all as specified and directed. |
| 77 | M&L for granite 14-16 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (14) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite inct moulding of front side if required complete all as specified and directed |
| 78 | Taking up or down old unservicable rusted Gl tubing of 15mm/20mm/25mm and connection removal to store complete all as specified and directed. |
| 79 | S&F GI tubing 15mm bore, medium grade with all fitting and concealed to wall ceiling or laid in floor complete all as specified and directed |
| 80 | Ditto all as per above item but of 20 mm bore |
| 81 | Ditto all as per above item but of 25 mm bore |
| 82 | S&F for 500 Itr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-1. |
| 83 | S&F in repair WC vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & Por S trap, flush pipie complete excluding cistern complete all as specified and directed. |
| 84 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and waste pipe connections to pipes of capacity 10 Its complete all as spepciified and directed. |
| 85 | S&F in repair brass chromium plated bib tap (short body)/stop cock/angle valve for iron pipe of 15mm bore fancy type with crutch or butterfly handle screwed down high pressure and fixed at both ends for iron pipe or for unions and fixedcomplete all as specified and directed |
| 86 | S&F in repair CP shower rose with or without swivel joints of 15 mm size complete all as specified and directed |
| 87 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 88 | S&F in repair CP fancy type bib tap (long body) chromium plated cast copper alloy screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 89 | S&F in repair Vitreous China wash basin white flat back size 550 x 400mm excluding taps waste, chain and plug, but incl brackets duly painted fixed waste pipe adequate length complete all as specified and directed. |
| 90 | S&F for 32mm PVC waste pipe for flushing cistern/WHB/SINK complete all as specified and directed. |
| 91 | S&F in repairs bevelled edge mirror of selected quality glass, 6mm thick fixed with chromium plated brass screws and cup washers complete all as specified and directed |
| 92 | S&F in repair 20 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 93 | S&F in repair 15 mm bore cast copper alloy stop valve, fancy type chromimum plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed. |
| 94 | S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed |
| 95 | S&F in repair vitreous china urinal half stall type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed |
| 96 | S&F urinal spreader of PTMT any color for fixing with 15 mm dia pipe minimum weight 50 gm complete all as specified and directed. |
| 97 | S&F in repair PTMT gating round 125 mm dia fixed in cement mortar 1:3 over floor trap with or without hole complete all as specified and directed |
| 98 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and directed. |
| 99 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 100 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 ог cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 101 | S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening. |
| 102 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 103 | M&L for Precast RCC type B-1 (1:2:4), using 20 mm graded stone aggregates cover slabs for manholes, open drains etc. including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified. |
| 104 | Mild steel bars 6mm to 8mm dia (and flat iron where quered), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded to flat iron complete all as specified |
| 105 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed |
| 106 | Dismantling expanded metal n.exc 4 kg per sqm, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed. |
| 107 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed. |
| 108 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 109 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 110 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10cm and n exc 15cm long complete all as specified and directed |
| 111 | Excavation in post hole each n exc 0.5cum getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 112 | M&L Plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) foundation of pillars and posts complete all as specified and directed. |
| 113 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of Galvanised mild steel wire, staples or steel pins, complete all as specified and directed. |
