|
| 1 | CHAIR DINING OFFICER (FD/MAP-II/04) |
| 2 | Removing old broken / unserviceable front legs from chair dining and S&F new front legs of Ist class hard wood teak wood as per shape and size shown in drawing, complete all as specified and directed. |
| 3 | All as per srl item No. 1.01 here-in-before but rear leg, complete all as specified and directed. |
| 4 | All as per srl item No. 1.01 here-in-before but front/ back/ side rail, complete all as specified and directed. |
| 5 | All as per srl item No. 1.01 here-in-before but back teak wood strip of size 30x15mm of suitable length, complete all as specified and directed. |
| 6 | All as per srl item No.1.01 here-in-before but stiffner. |
| 7 | Removing oldunserviceablefoam cushioned seat from existing chair dining cushionedand S&F new 75 mm thick ,40 density foam seat to chair dining duly covered with tapestry Cloth (Make: D\"decor/ Bombay Dyeing) of range not less than ₹ 300.00 per meter, colour, shade and quality of tapestry Clothshall be as approved by EIC, complete all as specified and directed. |
| 8 | S&F new wooden bracket / corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including melamine polish, complete all as specified and directed. |
| 9 | TABLE DINING 6/8 PERSONS (FD-239, FD-273) |
| 10 | Dismantling, taking out carefully and replacement of old existing broken top of table dining 6/8 persons of any description & replacement of the same with S&F new table top of 18/19mm thick pre-laminated particle board one side teak face lamination & other side white balancing exterior grade, BWP and including 6mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drawing, specified and directed by the Engineer-in-Charge complete materials & labour, complete all as specified and directed. |
| 11 | Taking out unserviceable long rail and providingnew long rail of Ist class hard wood [Teak ], complete all as specified and directed. |
| 12 | Taking out old unserviceable short rails and providingnew short rails of Ist class hard wood [Teak], complete all as specified and directed.(Note : Old material obtained from long rail shall be used in short rail) |
| 13 | Taking out unserviceable legs and providing new legs made out of Ist class hard wood [Teak ], complete all as specified and directed. |
| 14 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing, complete all as specified and directed. |
| 15 | SOFA SET 5 SEATER WITH CUSHION, FD-281 / FD-373M/ FD/MAP-II/02 |
| 16 | Removing/taking out of old broken damaged hand rest of Sofa set 5 seaterans S&F new hand restmade out of ist class well seasoned teak/sisham wood free from konts, sapwoos etc., complete all as specified and directed. |
| 17 | Dismentling of old and unserviceable long rails of Sofa set 3 seater and S&F of new long rails made out of well seasoned teak wood. All as per size and design shown on drawing and as per existing Sofa set. |
| 18 | Dismantling of old and unserviceable Rear legs of sofa set 5 seater and S&F new legs made out of well seasoned teak wood all a per size and design shown on drawing and as per exiting sofa sets. |
| 19 | Removing the unserviceable upholstry cloth cover of sofa coushon and M&L for cushion cover made from tapestry cloth of approved quality duly stiched and providedopening facility on one side by attching zip nylon grib, best quality, suitable for inserting and removing sofa cushion of size (530x560x100)mm, complete all asspecifed and directed. Make :Sleepwell/Comfort/SSF/Kurlon or equivalent ISI Marked make as approved by Engr-in-Charge. |
| 20 | Removing the unservicebale cushion from Sofa and S&F new cushion 40 density of size (530x560x100)mm duly covered with long polyester cloth best quality complete all as specifed and as directed.Make :Sleepwell/Comfort/SSF/Kurlon or equivalent ISI Marked make as approved by Eng-in-Charge. |
| 21 | CHAIR DINING(FD-279) |
| 22 | S&F new side rail as per existing shape and size with 1st class well seasoned teak wood free from knots, sapwood etc.duly polish finish including taking out old broken, damaged side rails from chair dining, complete all as specified and directed. |
| 23 | All as per item No. 4.01herein-in-before but front & rear rails all as per drawing, complete all as specified and directed. |
| 24 | All as per item No. 4.01herein-in-before but front legs all as per drawing, complete all as specified and directed. |
| 25 | All as per item No. 4.01 herein-in-before but rear legs all as per drawing, complete all as specified and directed. |
| 26 | All as per item No. 4.01herein-in-before but stiffener all as per drawing, complete all as specified and directed. |
| 27 | Removing of existing, old worn out plastic cane from chair dining & recanning the same with 2mm wide white plastic cane of approved quality with a beading of 3mm wide white plastic cane, complete all as specified and directed. |
| 28 | CHAIR EASY (FD-229), FD-17M |
| 29 | Taking/removingout old damaged / broken / unserviceable following parts / components fromfront legs from chair easy and S&F new legs made out of 1st class well seasoned teak wood free from knots, sapwood etc.complete duly polish glossy finish, complete all as specified and directed. |
| 30 | All as per item No. 5.01 here-in-before but rear legs of chair easy all as per drawing, complete all as specified and directed. |
| 31 | All as per item No.5.01 here-in-before but arms of chair easy all as per drawing, complete all as specified and directed. |
| 32 | All as per item No. 5.01 here-in-before but front & back rails of chair easy all as per drawing, complete all as specified and directed. |
| 33 | All as per item No. 5.01 here-in-before but side rail of seat frame of chair easy all as per drawing, complete all as specified and directed. |
| 34 | All as per item No. 5.01 here-in-before but side rail of back frame of chair easy all as per drawing, complete all as specified and directed. |
| 35 | All as per item No. 5.01 here-in-before but back rest of back frame of chair easy all as per drawing, complete all as specified and directed. |
| 36 | All as per item No. 5.01 here-in-before but stiffeners front of chair easy all as per drawing, complete all as specified and directed. |
| 37 | Taking / removing out of existing old unserviceable worn out plastic cane from seat and back from chair easy and recanning both seat and back with 2mm wide white plastic cane with a beading of 3mm wide plastic cane approved quality (white), complete all as specified and directed. |
| 38 | CHAIR WRITING (FD-280) |
| 39 | Taking / removing out old broken / damaged / unserviceable following components / parts from front legs of chair writing carefully opening the joints from the frame and S&F new coomponents from front legs made out of 1st classwell seasoned teak wood free from knots, sapwood etc.as per existing size and shape duly polish glossy finish, complete all as specified and directed. |
| 40 | All as per item No. 6.01 here-in-before but rear legs all as per drawing, complete all as specified and directed. |
| 41 | All as per item No. 6.01 here-in-before but side rails all as per drawing, complete all as specified and directed. |
| 42 | All as per item No. 6.01 here-in-before but front & back rails all as per drawing, complete all as specified and directed. |
| 43 | All as per item No. 6.01 here-in-before but arms all as per drawing, complete all as specified and directed. |
| 44 | All as per item No. 6.01 here-in-before but back rest all as per drawing, complete all as specified and directed. |
| 45 | All as per item No. 6.01 here-in-before but stiffeners all as per drawing, complete all as specified and directed. |
| 46 | Removing / taking outof existing old worn out plastic cane from chair writing and recanning the same with 2mm wide white plastic cane with beading of 3mm wide plastic cane approved quality (white) as per existing specification, complete all as specified and directed. |
| 47 | BED HARD PLYWOOD TOP(FD-246) |
| 48 | Taking/removingout old unserviceable, broken long rail from hard bed and S&F with new long rail of size (1980X90X40)mm made out of well seasoned teak wood free from knots, sapwood etc.duly french polish glossy finish as per existing specification, complete all as specified and directed. |
| 49 | Taking out old unserviceable broken stiffener from bed hard and S&F new stiffener of size (900X60X40)mm made out of well seasoned teak wood duly french polish glossy finish as per existing specification, complete all as specified and directed. |
| 50 | Taking out old unserviceable leg from hard bed and S&F new leg of size 660X60X60mm made out of teak wood duly french polish glossy finish as per existing specification, complete all as specified and directed. |
| 51 | Taking out old unserviceable broken plywood from head board of hard bed and S&F 4mm thick new plywood one side teak face of size of 460X90mm as per existing specification, complete all as specified and directed. |
| 52 | Taking out old unserviceable broken plywood from foot board of hard bed and S&F 4mm thick the same with new plywood one side teak face of size (310X900)mm as per existing specificaton, complete all as specified and directed. |
| 53 | Taking out old damaged unserviceable top from existing position and S&F 12mm thick plywood BWR grade commercialas per existing specification, complete all as specified and directed. |
| 54 | PEG TABLE (FD-277, FD-384) |
| 55 | Dismantling, taking out carefully and replacement of old existing broken top of peg table of any description, & replacement of the same with S&F new top of peg table with Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC with 2 mm thick PVC edging of Make-Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drawing and directed by the Engineer-in-Charge. |
| 56 | Replacement of leg with S&F newteak wood leg made to shape, complete all as specified and directed. |
| 57 | Replacement of long rail with S&F new teak wood long rails made to shape, complete all as specified and directed. |
| 58 | Replacement of short rails with S&F new teak wood short rails made to shape, complete all as specified and directed. |
| 59 | S&F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing etc., complete all as specified and directed. |
| 60 | TABLE CENTER (FD-29, FD-235, FD-274) |
| 61 | Dismantling, taking out carefully and replacement of old existing broken top of table center of any description, & replacement of the same with S&F new top of 18mm thick pre laminated particle board one side teak face lamination & other side white balancing, exterior grade, BWP and including 6mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drawing, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour. |
| 62 | Replacement of leg with S&F new teak wood leg made to shape, complete all as specified and directed. |
| 63 | Replacement of long rail with S&F new teak wood long rails made to shape, complete all as specified and directed. |
| 64 | Replacement of short rails with S&F new teak wood short rails made to shape, complete all as specified and directed. |
| 65 | Replacement of stiffener with S&F new teak wood stiffener made to shape, complete all as specified and directed. |
| 66 | TEAPOY (FD-34M, FD-277, FD-382) |
| 67 | Dismantling, taking out carefully and replacement of old existing broken top of teapoy of any description, & replacement of the same with S&F new top of 18mm thick pre laminated particle board one side teak face lamination & other side white balancing, exterior grade, BWP and including 6mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drawing, specified inparticular specification and directed by the Engineer-in-Charge complete materials & labour. |
| 68 | Replacement of leg with S&F new teak wood leg made to shape, complete all as specified and directed. |
| 69 | Replacement of long rail with S&F new teak wood long rails made to shape, complete all as specified and directed. |
| 70 | Replacement of short rails with S&F new teak wood short rails made to shape, complete all as specified and directed. |
| 71 | Replacement of stiffener with S&F new teak wood stiffener of teapoy wooden made to shape, complete all as specified and directed. |
| 72 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing, specified and directed, complete all as specified and directed. |
| 73 | CHAIR DINING (JCO/ORS) (FD/MAP-II/05) |
| 74 | Replacement of old unserviceable front leg from existing Chair dining and S&F same size new front leg as per existing shape and size with 1st class well seasoned teak wood duly polish glossy finish all as shown on drawing, complete all as specified and directed. |
| 75 | All as per srl item No. 11.01 here-in-before but rear leg of chair dining. |
| 76 | All as per srl item No. 11.01 here-in-before but front/ back/ side rail of chair dining. |
| 77 | All as per srl item No. 11.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining. |
| 78 | All as per srl item No. 11.01 here-in-before but stiffener between front leg to rear leg of chair dining. |
| 79 | All as per srl item No. 11.01 here-in-before but stiffener for jointing to side stiffener of chair dining. |
| 80 | Removing of old unserviceable / broken PVC seat from chair dining and S&F new PVC seat 4mm thick with holes ans screwed with frame and rails in single piece all as per shape and size shown on drawing, complete all as specified and directed. |
| 81 | S&F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drawing, complete all as specified and directed. |
| 82 | HAT STAND WITH MIRROR (FD-233) |
| 83 | M & L for replacement of Base made of Pre-laminated Particle board 18/19 mm in requied shape and size including removing of old broken parts all as specified and shown on drawing and as directed by Engineer-in-Charge. |
| 84 | Teak wood beading shape & size as per drawing, complete all as specified and directed. |
| 85 | Mirror 5 mm thick size as per drawing, complete all as specified and directed. |
| 86 | Brass pegs with screws size and shape as per drawing, complete all as specified and directed. |
| 87 | TABLE 900 MM X 600 MM WITH DRAWER (3\" x 2\") (WOODEN) (FD-41, FD-224, FD-223, FD-283) |
| 88 | Dismantling, taking out carefully & replacement of old existing broken table top of Table 900mm x 600mm of any decription & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make (Make:- Ecoboard/Action- Tesa / Greenply) with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, complete all as specified and directed. |
| 89 | Replacement of legs of table 900mm x 600mm with drawer S&F new leg made out of Ist class hard wood (teak wood), complete all as specified and directed. |
| 90 | Replacement of table frame\"srail with S&F newtable frame\"s long rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, all as specified and directed. |
| 91 | Replacement of unserviceable drawer with new drawer of same size and shape to Table 900mm x 600mm with drawer. Front of the drawer shall be made out of 18mm thick. pre-lamianted particle board teak faced and including aluminium anodized knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drawing including one coat of melamine polish, complete all as specified and directed. |
| 92 | S&F new Stiffener and complete all as shown on drawings, all as specified and directed. |
| 93 | Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drawings, all as specified and directed. |
| 94 | Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drawings, all as specified and directed. |
| 95 | POLISH OF WOODEN FURNITURE |
| 96 | M&L preparation of old exposed wooden surfaces by scraping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, Rubbing of surfaces with sand paper till smoothening and polishing with french polish glossy finish for Almirah large 1/2Hx1/2S wooden (DB-4042), complete all as specified and directed. |
| 97 | All as per Srl No. 14.1 here-in-before but for Almirage large with shelf wooden (DB-4092), complete all as specified and directed. |
| 98 | All as per Srl No. 14.1 here-in-before but Almirah medium with shelf wooden (DB-4092), complete all as specified and directed. |
| 99 | All as per Srl No. 14.1 here-in-before butBed hard with ply top (FD-246), complete all as specified and directed. |
| 100 | All as per Srl No. 14.1 here-in-before but Book Shelf open large wooden (DB-4121) |
| 101 | All as per Srl No. 14.1 here-in-before but Book Shelf open small wooden (DB-4121), complete all as specified and directed. |
| 102 | All as per Srl No. 14.1 here-in-before but Chair writing (FD-280), complete all as specified and directed. |
| 103 | All as per Srl No. 14.1 here-in-before but Chair Easy FD/NF (FD-229), complete all as specified and directed. |
| 104 | All as per Srl No. 14.1 here-in-before but Chair dining officer (MAP) FD/MAP-II/04, complete all as specified and directed. |
| 105 | All as per Srl No. 14.1 here-in-before but Chair dining with Long back(FD-357), complete all as specified and directed. |
| 106 | All as per Srl No. 14.1 here-in-before but Chair wooden bottom (FD-285), complete all as specified and directed. |
| 107 | All as per Srl No. 14.1 here-in-before but Chair dining (FD 279), complete all as specified and directed. |
| 108 | All as per Srl No. 14.1 here-in-before but Chair dining (JCO/ORS) FD/MAP-II/05, complete all as specified and directed. |
| 109 | All as per Srl No. 14.1 here-in-before but Hat stand with mirror (FD 23(M), complete all as specified and directed. |
| 110 | All as per Srl No. 14.1 here-in-before but Locker bedside wooden (FD 54(M), complete all as specified and directed. |
| 111 | All as per Srl No. 14.1 here-in-before but for Almirah medium 1/2Hx1/2S wooden (DB-4161), complete all as specified and directed. |
| 112 | All as per Srl No. 14.1 here-in-before but Peg Table (FD-277), complete all as specified and directed. |
| 113 | All as per Srl No. 14.1 here-in-before but Side board wooden (FD 26(M)), complete all as specified and directed. |
| 114 | All as per Srl No. 14.1 here-in-before but Sofa set 5 seater with cushion (FD-281/FD-373M/ FD/MAP-II/02), complete all as specified and directed. |
| 115 | All as per Srl No. 14.1 here-in-before but Safe meat & milk(FD 47-M), complete all as specified and directed. |
| 116 | All as per Srl No. 14.1 here-in-before but Stool dressing CB (FD-27 (M)), complete all as specified and directed. |
| 117 | All as per Srl No. 14.1 here-in-before but Table dining 8 person (FD-273), complete all as specified and directed. |
| 118 | All as per Srl No. 14.1 here-in-before but Table diniing 4/6 person (FD-273), complete all as specified and directed. |
| 119 | All as per Srl No. 14.1 here-in-before but Table 3`x3` wooden (FD-291), complete all as specified and directed. |
| 120 | All as per Srl No. 14.1 here-in-before but Table centre (FD-236), complete all as specified and directed. |
| 121 | All as per Srl No. 14.1 here-in-before but Teapoy wooden (FD-278), complete all as specified and directed. |
| 122 | All as per Srl No. 14.1 here-in-before but Teapoyverandah (FD-253/383), complete all as specified and directed. |
| 123 | All as per Srl No. 14.1 here-in-before but Table writing/Med (FD-276), complete all as specified and directed. |
| 124 | All as per Srl No. 14.1 here-in-before but Table bed side (FD-248), complete all as specified and directed. |
| 125 | All as per Srl No. 14.1 here-in-before but Table 3`x3` with/ without drawer (FD-223 & 284), complete all as specified and directed. |
| 126 | All as per Srl No. 14.1 here-in-before but Table 3\" X 2\" with drawer (FD-55M, FD-283), complete all as specified and directed. |
| 127 | All as per Srl No. 14.1 here-in-before but Table one piece all purpose, complete all as specified and directed. |
| 128 | All as per Srl No. 14.1 here-in-before but Table dressing Gents with mirror (FD 31 (M) & FD-230), complete all as specified and directed. |
| 129 | All as per Srl No. 14.1 here-in-before but Table dressing ladies with mirror (FD 32(M) & FD-378), complete all as specified and directed. |
| 130 | All as per Srl No. 14.1 here-in-before but Wooden office table for officer (DB-4149), complete all as specified and directed. |
| 131 | CONVERSION OF NEWAR CHARPOY TO HARD TOP CHARPOY WITH THE FOLLOWING ITEMS OF WORK TO INCORPORATE FOR THE CHANGE (DRAWING NO. FD-220) |
| 132 | M&L for removal/taking out of existing nylon newar tape white 50-55mm wide of charpoy GI pipe 32mm dia and S&F of 12mm thick commercial plywood BWR grade of size1980mm x 900mm approx duly fixed with 4mm thick 12mm wide teak wood beading all around 12mm thick ply top sheet to be fixed on frame structure of GI pipe charpoy of 32mm size with the help of round headed counter sunk screws, bolts , nuts and washer of size 4mm dia x 75mm long after drilling (total 10 Nos) suitable hole to short rail and long rail of charpoy shall be made and ply top to be fixed rigidly,tightining all the check nuts elbow, long rails short rails and legs to hold the charpoy tight the elbows and legs, complete all as specified and directed. |
| 133 | Removing of old unserviceable long rail from the existing GI Charpoy frame and S&F new long rail of length as shown on drawing made out of 32mm dia GI pipe med grade after threading both ends complete all as specified and shown on drawing, complete all as specified and directed. |
| 134 | Dismantling of existing serviceable/unserviceable short rail and cutting of unserviceable long rail of 32mm dia GI pipe as obtained from Srl No. 1.02 here-in-before to equal two pieces as required for short rail and screwed, making threaded at both sides complete all as specified and shown on drawing, complete all as specified and directed. |
| 135 | Removing of old unserviceable leg from the existing GI charpoy frame and fixing of new leg lengthall as shown on drawing made out of GI pipe retrieved from short rail obtained against items Srl No. 1.03 here-in-before after cutting and threading complete all as specified including supply and fixing hard wood block (wooden gutka) of size (35x35x40)mm fixed with 30mm long machine screw to legs as shown on drawing, complete all as specified and directed. |
| 136 | Removing of old unserviceable GI Elbow 3 way 32mm dia from the existing GI Charpoy frame and supply and fixing of new elbow 3 way of 32mm dia medium grade ISI marked suitable for GI charpoy 32mm dia., complete all as specified and directed. |
| 137 | Removing of old unserviceable check nuts and S&F new check nuts GI 32mm dia medium grade 6mm thick to the frame of charpoy, complete all as specified and directed. |
| 138 | CHAIR CBA STEEL (FD-386) |
| 139 | Dismentling of old and unserviceable seat frame from chair CBA steel with arms and S&F of new seat frame made out of teak wood, french polished, duly canned with 2 mm half round plastic cane, superior quality, canned in Godrej pattern, complete all as specified and directed. |
| 140 | All as per item No.16.01 above but back frame of chair CBA steel with arms, complete all as specified and directed. |
| 141 | Dismentling of old and unserviceable arms rest from chair CBA steel with arms and S&F of new arms made out of teak wood painted with black paint all as per size and designs shown in drawing, complete all as specified and directed. |
| 142 | M & L for welding MS flat iron 24X3 mm under the seat frame (2 per seat). All as directed by Engr-in-Charge. |
| 143 | Removing of unserceable/torned cane and Cane the seat or back with 2 mm half round plastic cane, superior quality, canned in Godrej pattern, complete all as specified and directed. |
| 144 | Cleaning of steel surfaceand making good old surface and applying one coat of OG synthetic enamel paint, complete all as specified and directed. |
| 145 | CHARPOY WITH HARD TOP (FD/MAP-II/01) |
| 146 | Taking / removing out old damaged unserviceable ply wood top from existing charpoy with hard top steel and S&F new hard top of 12mm thick (BWR grade , ISI Marked ) ply plywood commercialas per existing shape and size with appropriate steel nuts & bolts, MS cleat of charpoy including taking down old one all as shown on drawing and after tightening the frame of charpoy hard top steel, complete all as specified and directed. |
| 147 | M&L preparation of old painted surface of charpoy with hard top steel scrapping by emery paper and applying by spraying machine painting with two coats of synthetic enamel paint 1st quality blackcolour(japanees paint ) including long rail, short rail,stiffeners and legs to charpoy hard top steel, complete all as specified and directed. |
| 148 | Taking out of old broken damaged hard rubber shoe of approved shoe of charpoy andS&F new hard rubber shoe of approved quality and tightly fitted at the bottom of legs as shown on drawing, complete all as specified and directed. |
| 149 | ALMIRAH LARGE STEEL (FD-1031, FD-67(M)) |
| 150 | Taking out unserviceable shelf of steel Almirah large wtih shelves and supply, fabricate and fix shelf made out of 1 mm thick PBI sheet of size (915x440)mm duly shaped to suitable for the other members and prepare the surface by providing putty applying two coats of synthetic enamal paint (Olive Green) over a coat of primer etc., complete all as specified and directed. |
| 151 | Taking out unserviceable lock of steel Almirah large/steel cupboard 78\", supply and fix new lock 65mm size with duplicate keys suitable for existing locking arrangement, complete all as specified and directed. |
| 152 | Removing the existing 3 way locking system in steel cupboard 78\" / steel Almirah large with shelves by greasing denting/bending and providing 10mm dia MS round bars as required etc and make functioning the locking arrangement, complete all as specified and directed. |
| 153 | Taking out existing worn out /thread less steel handle of almirah steel normal/large/cupboard steel 78\", supplying new new steel handle, chromium plated of approved quality and fixing suitably with locking arrangement, complete all as specified and directed. |
| 154 | Taking out existing unserviceable shutters of cupboard steel and almirah steel large/ cupboard steel 78\", supply and fix shutter made out of 1 mm thick PBI sheet of size (1800x430)mm fixed with 75mm MS butt hinges and also make provision for fixing lock, handle and 3 way locking system etc. and preparing the surface and applying two coats of synthetic enamal paint (Olive Green) over a coat of primer, complete all as specified and directed. |
| 155 | Taking out existing unserviceable leg of cupboard steel and almirah large/ cupboard steel 78\", supply and fix leg made out of 1mm thick PBI sheet, complete all as specified and directed. |
| 156 | ALMIRAH MEDIUM STEEL (FD-1032, FD-67(M)) |
| 157 | Almirah medium /50\" steel with shelves (FD 67(M))Taking out unserviceable shelf of almirah steel 50\" / almirah steel medium with shelves and supply, fabricate and fix shelf made out of 1 mm thick PBI sheet of size 915x440mm duly shaped to suitable for the other members and prepare the surface by providing putty applying two coats of synthetic enamal paint(Olive Green) over a coat of primer etc., complete all as specified and directed. |
| 158 | Taking out unserviceable lockof almirah steel 50\" / almirah steel medium with shelves, supply and fix fix new lock 65mm size with duplicate keys suitable for exicting locking arrangement, complete all as specified and directed. |
| 159 | Repairing the existing 3 way locking system in almirah steel 50\" / almirah steel medium with shelves by greasing, denting/bending and providing 10mm dia MS round bars as required etc and make functioning the locking arrangement, complete all as specified and directed. |
| 160 | Taking out existing worn out /thread less steel handle of almirah steel 50\" / almirah steel medium with shelves supplying new steel handle chromium plated of approved quality and fixing suitably with locking arrangement, complete all as specified and directed. |
| 161 | Taking out exsting unserviceable shutters of almirah med steel 50\" / almirah steel medium with shelves, supply and fix shutter made out of 1mm thick PBI sheet of size 1800 x 430mm fixed with 75mm MS butt hinges and also make provision for fixing lock, handle and 3 way locking system etc and preparing the surface and applying two coats of synthetic enamel paing (Olive Green) over a coat of primer, complete all as specified and directed. |
| 162 | Taking out existing unserviceable leg of almirah steel 50\" / almirah steel medium with shelves, supply andfix leg made out of 1mm thick PBI sheet and preparing the surface and applying two coats of synthetic enamal (Olive Green) over a coat of primer, complete all as specified and directed. |
| 163 | DINING TABLE ALUMINIUM TOP (FD-165(M)) |
| 164 | S&F ORs dining table top 19mm thick block board (1900mmx685mm) with 22 gauge Aluminium sheet on top (1975mmx760mm) including taking out old one and covered over around the side (edges) to the 15mm of the bottom surface of particle board fixed with aluminium screws at 150mm c/c on the bottom faces complete all as specified and shown on drawing, complete all as specified and directed. |
| 165 | Repair to rusted tear and wear frame of dining table ORs and supply & fixing new frame of 25x25mm MS square tube 16 gauge, frame size 1600mm x515mmx760mm fitted to top and side stiffener & legs with steel screws brass painted to complete all as shown on drawing, all as specified and directed. |
| 166 | Welding of broken joints of steel furniture item of same weld joints shall be continuous and finished smoothly by gas welding, complete all as specified and directed. |
| 167 | Taking out old unserviceable PVC hard rubber shoes and S&F new PVC hard rubber shoes fixed on steel legs tightly, complete all as specified and directed. |
| 168 | BED PLY TOP STEEL (FD/E6/MAP/08(R)) |
| 169 | S&F in repair of 12mm thick plywood BWR grade commercialas per existing specification with and including necessary fixing arrangements (Nut-bolt-washers, etc.), complete all as specified and directed. |
| 170 | S&F in repair of 18/19mm thick prelaminated particle board placed in position for Headrest by providing PVC beading all around the edges and duly fitted with screws as shown in drawing as per existing, complete all as specified and directed. |
| 171 | S&F in repair of 18/19mm thick prelaminated particle board placed in position for Footrest by providing PVC beading all around the edges and duly fitted with screws as shown in drawing as per existing, complete all as specified and directed. |
| 172 | M&L for electric welding in repairs of dislocated/broken jointsof Bed Ply Top Steel same weld joints & grinding to match the surface Shall be continuous and finished smoothly by gas welding, complete all as specified and directed. |
| 173 | Taking out of old broken damaged hard rubber shoe of from Bed Ply Top Steel andS&F new hard rubber shoe of approved quality and tightly fitted at the bottom of legs as shown on drawing, complete all as specified and directed. |
| 174 | M&L for applying two coats of synthetic enamel paint of 1st quality of approved shade/ olive green colour over a coat of primer orrequire shade to Bed Ply Top Steel (Internally & externally) including necessary repairs if any by providing rivets , gas welding, denting etc. Preparation of surfaces (Internal, external,shelves,legs, rails ,stiffeners etc.) by applying putty and sanding duly denting bendingof following items and making the surface free from rust , dust any foreign materials, complete all as specified and directed. |
| 175 | CHAIR VERANDAH (FD-259) |
| 176 | Removing of old rusted damaged leg from chair varandah by cutting out from frame and S&F the same with 20mm dia conduit pipe 16 G duly welding to frame, complete all as specified and directed. |
| 177 | Removing of old worn out plastic cane from chair varandah and recanning the same with 4mm wide plastic cane white half round, complete all as specified and directed. |
| 178 | Dismantling of old unserviceable rubber shoe from chair verandah and S&F new rubber shoes of best quality, complete all as specified and directed. |
| 179 | CHAIR SCHOOL WITH HARD BOARD (FD/E6/MAP/05) |
| 180 | S&F of one piece seat and back as per drawing, complete all as specified and directed. |
| 181 | S&F of 18 mm thick made of MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour / shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete top openable with PVC edging (Hinged on RHS) screwed to 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame as per drawing, complete all as specified and directed. |
| 182 | M&L for welding work wherever required, complete all as specified and directed. |
| 183 | S&F of Powder Coating of complete frame before fitting of above parts as per drawing, complete all as specified and directed. |
| 184 | BOOK CASE STEEL LARGE/SMALL (FD-69(M)) |
| 185 | Taking out broken /unserviceable leg of book case steel large and providingnew leg of 1 mm thick PBI sheet by welding duly painted, complete all as specified and directed. |
| 186 | Supply and fixing new lockwith duplicate keys of Godrej pattern lock suitable for Book Case Steel, complete all as specified and directed. |
| 187 | Supply and fixing new handle ‘medium weight’ made of chromium plated steel suitable for book case steel large including taking out old defective unserviceable handle, complete all as specified and directed. |
| 188 | Taking out broken glasses and fixing new glasses of 5mm thichness at the shelf door of Book case, complete all as specified and directed. |
| 189 | LOCKER BED SIDE STEEL (FD-257) |
| 190 | Dismentling of old and unserviceable handles from locker bed side steel and S&F of new handle aluminium iodized 100 mm, complete all as specified and directed. |
| 191 | Dismentling of old and unserviceable hasp & stapples from locker bed side steel and S&F of new hasp and stapples 75 mm CP steel, complete all as specified and directed. |
| 192 | Dismentling of olde legs and S&F of new leg to locker bed side steel by welding all as required. Leg shall be made out of 1 mm thick MS sheet, complete all as specified and directed. |
| 193 | Dismentling of old and unserviceable hanging rod and S&F new hanging rod in locker bed side steel including with side clamps both side. Hanging rod shall be 1.6 mm thick, 20 mm dia, chromium plated steel conduit pipe, complete all as specified and directed. |
| 194 | Dismentling of old and unserviceable door shutters and S&F of new shutters complete made out of 1 mm MS sheet. All as per size and design and as directed including painting with OG synthetic enamelled paint, complete all as specified and directed. |
| 195 | TEAPOY VERANDAH (FD-255/ FD-383) |
| 196 | Taking out unserviceable top and providing new top 900 mm x 450mm made out of 19mm thick prelaminated particle board BWR grade, bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990).Grade-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete , complete all as specified and directed. |
| 197 | Repair and replacement of unserviceable legs and frame of tepoy verandah and applying one coat ofsynthetic enamel paint white after preparation of old steel surfaces, complete all as specified and directed. |
| 198 | PAINTING OF STEEL FURNITURE |
| 199 | M&L Almirah Large and small steel(FD-67 (M),FD-1031 )for two coats of synthetic enamel paint of 1st quality of approved shade / olive green colour over a coat of primer orrequire shade (Internally & externally) including necessary repairs if any by providing rivets , gas welding, denting etc. Preparation of surfaces (Internal, external,shelves,legs, rails ,stiffeners etc.) by applying putty and sanding duly denting bendingof following items and making the surface free from rust, dust any foreign materials, complete all as specified and as directed. |
| 200 | All as per item No 27.01 here-in-before but Almirah alrge steel 1/2 H 1/2 S (FD-1033, FD-114M), complete all as specified and directed. |
| 201 | All as per item No 27.01 here-in-before but Almirah small steel with shelves (FD-67M, FD-1032), complete all as specified and directed. |
| 202 | All as per item No 27.01 here-in-before but Locker steel( FD-257 ), complete all as specified and directed. |
| 203 | All as per item No 27.01 here-in-before but Table Dining steel OR\"s Aluminium Top (FD-165(M)), complete all as specified and directed. |
| 204 | All as per item No 27.01 here-in-before but Rack Shoe steel (drawing NO-FD-E6/MAP/02R), complete all as specified and directed. |
| 205 | All as per item No 27.01 here-in-before but Chair verandah steel(FD-3510/256/2510), complete all as specified and directed. |
| 206 | All as per item No 27.01 here-in-before but Chair verandah JCO/OR (FD/MAP-II/15), complete all as specified and directed. |
| 207 | All as per item No27.01 here-in-before but for Table 900x900x760mm steel (FD-1009), complete all as specified and directed. |
| 208 | All as per item No27.01 here-in-before but for Table 900x600x760mm steel with drawer (FD-1008), complete all as specified and directed. |
| 209 | All as per item No27.01 here-in-before but for Book case steel/book shelves steel(FD 69 M), complete all as specified and directed. |
| 210 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. |
