|
| 1 | Dismantling plain or corrugated steel sheeting of any type asbestos/steel, any gauge, thickness, including Nainital or similar pattern roof coverings sheets and removing from site complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, fixed with self tapping screws as specified and directed. and removing from site complete all as specified and directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F Anodised aluminium snap grid of size 605 X 605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified ®.including dismantling old Frame of wooden or aluminumor any patteren old frame/grid and removing from site complete all as specified and directed. |
| 5 | S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling old AC/CGI/PVC/woodenor any patteren old sheet and removing from site complete all as specified and directed. |
| 6 | M&L for 75mm Cement concrete type D-2,1:4:8 (40mm graded aggregate)as in sub base complete all as specified and directed. |
| 7 | M&L for 50 mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 9 | Taking down cement plaster of any description upto roof including necessary scaffoldings including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 10 | M&L 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth with out using extra cement etc complete all as specified and directed. |
| 11 | M&L rendering 15 mm thick in CM 1:4 in two layers of 10mm and 5mm, 15mm thick plaster shall be done with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer\"s instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 12 | Supply only liquid water proofing compound complete all as specified and directed. |
| 13 | M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 14 | M & L for one coat of oil bound distemper on old or newplastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 15 | M&L for preparation of newplastered or unplastered surfaces of wall and applying two coats of cement based paint of any tint over one coat of cement wash complete all as specified and directed. |
| 16 | M & L for one coat of cement base paint on old surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 17 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and directed. |
| 19 | S&F made single extruded WPC (Wood Polymeromposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 20 | S&F factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 21 | S&F 30mm thick factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum an door to be panelled with SS mosquito mesh an XTN aluminium mesh for aditional strength and safety purpose hologram to be clearly visible on material, and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Manufacture test certificates to be submitted complete all as specified and directed. |
| 22 | S&F Factory made mild steel window with side hung shutter (Box type) without glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle, holdfast, & hinges and peg stay complete all as specified and directed. |
| 23 | S&F Factory made mild steel window with side hung shutter (Box type) with glazing bars to receive Glass, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay complete all as specified and directed. |
| 24 | S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed. |
| 25 | S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed. |
| 26 | S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed. |
| 27 | S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm. complete all as specified and directed. |
| 28 | S&F extruded aluminium alloy, anodised, sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 29 | S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed. |
| 30 | S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and directed. |
| 31 | S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 32 | M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 33 | M & L for preparations of new or previously untreated WPC dooor surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to WPC door surfaces complete all as specified and directed. |
| 34 | S&F Powder coated Anodised aluminium frame for doors, aluminium three track sliding windows and ventilators(is a combination of three track panels having two tracks of glass pane shutters and one track for wire mesh/aluminium grill to slide back and forth)with one or more rebates including joining cleats and rubbers as required for fixing etc. complete all as specified and directed. |
| 35 | S&F Powder coated Anodised aluminium door, shutters/partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.Note :(i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 36 | S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed. |
| 37 | S&F Powder coated Anodised aluminium sliding windows & ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.Note :(i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 38 | S&F as inbrass Mortice lock,vertical type, 4 leversize 100 mm complete all as specified and directed. |
| 39 | S&F Anodised Alum powder coated of any colour deco grill of 4 mm dia (powder coating not less than 50 micron)all as specified and directed at site complete all as specified and directed. |
| 40 | S & F Neoprene/EPDM rubber gasket/beading for aluminium door, windows and ventilators complete all as specified and directed. |
| 41 | S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed. |
| 42 | S&F sheet glass 4.8 mm thick ordinary quality in squares exc 0.5 sq m each pane complete all as specified and directed. |
| 43 | Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 44 | S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed. |
| 45 | S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed. |
| 46 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, and not exc 1 sqm in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 48 | M&Lglazed ceramic coloured, designer & pattern (dark & light shade combination) tilesin450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxyto match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 49 | Demolition of stone slabs and tiles of any description or thickness in floors, wallsaprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 50 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area. |
| 51 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver interlocking block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including compacting and proper embedding/ laying of inter ocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 52 | M&L for sand cushioning layer for laying PCC interlocking paver block complete all as specified and directed. |
| 53 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed. Note : Bldg No shall be done by using Stencil cutting to mark with neat finish complete all as specified and directed. |
| 54 | Providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 55 | Demolition of brick work or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 56 | M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 57 | Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 58 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 59 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed. |
| 60 | Cutting holes into or through cement concrete slabs and cutting through reinforcement chajjas, etc reinforced or other wise surfical area n.exc 100 sqcm as directed to insert angle iron for holding chajjas / coller platforms as required complete all as specified and directed. |
| 61 | S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated), for cooler stand, chajjas complete all as specified and directed. |
| 62 | M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 63 | M&L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 64 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete fixed in repairsall as specified and directed. |
| 65 | Panting of kerb stone in new or previously untreated surface with white/black paint any descripation of one coat of primer over two coat synthetic enamal paintof over10 cm grith (or) width complete all as specified and directed. |
| 66 | S&F in repair vitreous china one piece WC with 10 ltrs capacity flushing cistern floor mounting frame, installation kit, drain pipe connection set, including necessary cutting to wall / floor making good complete all as specified and directed. |
| 67 | S&F designer counter table top wash hand basin with cabinet , any colour, flat back of size 600 x 500 mm excluding taps, and plug and porcelain stopper but including PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 68 | S&F in repair Vitreous China full stack urinals, automated flush type, shape oval bowltype (back or corner wall type),complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union fordischarge pipe. (Exclusive offixing supply pipe to flushingcistern, trap and waste pipe) complete all as specified and directed. |
| 69 | S&F in repair CP soap dishfixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 70 | S&F in repair corner glass shelf 300mm (with brass brackets)along with CP railing complete all as specified and directed. |
| 71 | S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw completelyall as specified and directed. |
| 72 | S&F in repair Health Faucet with hose & hook as per specified and directed. |
| 73 | S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. |
| 74 | S&F in repair PVC connections in repair 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 75 | S&F in repair Towel Ring Round with Round Flange complete all as specified and directed. |
| 76 | Dismantling water tanks, open or closed, in position and removing to store of capacity exc 500 and n.exc1000 litre complete all as specified and directed. |
| 77 | S&F Rotational moulded polyethylene water storage Tank of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part Icomplete all as specified and directed. |
| 78 | S&F in repair Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed. |
| 79 | S&F 20mm bore dia nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed. |
| 80 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipecomplete all as specified and directed. |
| 81 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposedincluding cleaning for refixing or removal to store complete all as specified and directed. |
| 82 | Supply &Laying of CPVC pipe, SDR 11,16mm outer dia & fittings on walls/ceiling or laying in floors and including taking down old pipe complete all as specified |
| 83 | S&F Brass Elbow forspecial fitting of16 mm bore CPVC pipe complete all as specified and directed. |
| 84 | S&F Brass Tee forspecial fitting of16 mm bore CPVC pipe complete all as specified and directed. |
| 85 | Supply & Laying of CPVC pipe, SDR 11, 20mm outer dia & fittings on walls/ceiling or laying in floors and including taking down old pipe complete all as specified |
| 86 | S&F Brass Elbow forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 87 | S&F Brass Tee for special fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 88 | S&F Male Brass threaded Adaptor Tee forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 89 | S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. Make Jaquar cat pat No MQT-519KN |
| 90 | S&F CP Central Hole Basin Mixer with Popup waste with 450 mm long Braided Hoses complete all as specified and directed. Make Jaquar Cat pat No COS-101051B |
| 91 | S&F in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 92 | S&F in repair 15 mm bib two way tap (fancy type) with wall flange, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make Jaguar Cat pat No MQT -512ANKN |
| 93 | S&F in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 94 | S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed. |
| 95 | S&FSS, premium type, peg set 6. heavy weight complete all as specified and directed. |
| 96 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 97 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 98 | S&F superior qualitySSCurtain rod, 20mm diawith and includingSS bracket 2 Nos of each opening andfancy type SSside knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed. |
| 99 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, plain with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed. |
| 100 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 101 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 102 | S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clampscomplete all as specified and directed. |
| 103 | S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 104 | S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 105 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 106 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 107 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 108 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed. |
| 109 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers complete all as specified and directed. |
| 110 | M& L 20 mm thick Granite of any type work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 10 mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 111 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 112 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 113 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed. |
| 114 | M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 115 | M&L RCC M-20 (Nominal Mix) in slabs supported on walls, beams and columns complete all as specified and directed. |
| 116 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 117 | S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 118 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etcto matchwith the existing the surface etc complete all as specified and directed. |
| 119 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic existing concealed conduit 19/20 mm dia medium duty, ISI marked to beterminated & including pressed modular steel boxes & cover plate of module as required on site. Including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistrandedcopper earthcontinuity conductor controlled by one switchand/or one regulator complete including repairing the surfaces in CM 1:3 and finishingthe surface as per existing treatment complete all as specified and directed. |
| 120 | Description all as per item No 119.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 121 | Description all as per item No 119.00 (here-in-before) butOne three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 122 | Description all as per item No 119.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 123 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed |
| 124 | S&F Modular switch 1 way 16A 1 module all as specified and directed |
| 125 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 126 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. |
| 127 | S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed. |
| 128 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 129 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 130 | S&F modularfan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed. |
| 131 | S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen outputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 132 | S&F in repair Sheet metal enclosure distribution board SPN, 8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed. |
| 133 | Supply and fixing 240V, 10 KA \"B\" curve miniature circut breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection teesting and commissioning complete all as specified and directed. |
| 134 | Supply and fixing MCBs SPN 32Amps,240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note:Make of the MCB should be the same as that of DB |
| 135 | S&F Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632, BS5484 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers properwithPCC works complete all as specified and directed. |
| 136 | Supply and fixing MCBs PF 63 Amps,415 volts, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note:Make of the MCCB should be the same as that of DB |
| 137 | S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired andnecessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. |
| 138 | Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed. |
| 139 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit. |
| 140 | M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type AC ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm height complete all as specified and directed. |
| 141 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 142 | Supply , laying,jointing, testing and commissioningof size 25 sqmm 3.5 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed. Note : Excavation, earth work, sand cushion & brick protection shall be paid separately. |
| 143 | Excavating in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for taking out of unservicable LT under ground/laying cable complete all as specified and directed. |
| 144 | Returning, filling in, any type of soil and spreading in layers not exceeding 25cm each complete all as specified and directed. |
| 145 | Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50m and depositing where directed complete all as specified and directed. |
| 146 | M&L for bricks covering to under gound electric cable using sub class \"B\" bricks laid dry, flat perpendicular to the direction of the cable complete all as specified and directed. |
| 147 | Supplying, filling in trenches, spreading, leveling sand cushioning 8cm below cable and 15 cm above the cable for under ground cable complete all as specified and directed. |
